No description available.

No description available.

Ring opening metathesis polymerization (ROMP) is established as one of the efficient controlled living polymerization methods which have various applications in polymer science and technology fields. The research presented in this dissertation addresses several applications of multifunctional well-defined norbornene-based block copolymers synthesized by ROMP using ruthenium-based Grubbs catalysts. These novel block copolymers were applied to stabilize maghemite nanoparticles, creating the superparamagnetic polymeric nanocomposites. The Jaggregation properties of the porphyrin dyes were improved via self-assembly with a customized norbornene polymer. Novel multimodal copolymer probes were synthesized for two-photon fluorescence integrin-targeted bioimaging. In Chapter 1 a brief overview of ROMP along with ruthenium metal catalysts and selected applications of the polymers related to this research is presented. Superparamagnetic maghemite nanoparticles are important in biotechnology fields, such as enhanced magnetic resonance imaging (MRI), magnetically controlled drug delivery, and biomimetics. However, cluster formation and eventual loss of nano-dimensions is a major obstacle for these materials. Chapter 2 presents a solution to this problem through nanoparticles stabiulized in a polymer matrix. The synthesis and chracterization of novel diblock copolymers, consisting of epoxy pendant anchoring groups to chelate maghemite nanoparticles and steric stabilizing groups, as well as generation of nanocomposites and their characterization, including surface morphologies and iv magnetic properties, is discussed in Chapter 2. In Chapter 3, further improvement of the nanocomposites by ligand modification and the synthesis of pyrazole-templated diblock copolymers and their impact to stabilize the maghemite nanocomposite are presented. Additionally, the organic soluble magnetic nanocomposites with high magnetizations were encapsulated in an amphiphilic copolymer and dispersed in water to assess their water stability by TEM. To gain a preliminary measure of biocopatibility of the micelle-encapsulated polymeric magnetic nanocomposites, cell-viability was determined. In Chapter 4, aggregation behaviors of two porphyrin-based dyes were investigated. A new amphiphilic homopolymer containing secondary amine moieties was synthesized and characterized. In low pH, the polymer became water soluble and initiated the stable Jaggregation of the porphyrin. Spectroscopic data supported the aggregation behavior. Two photon fluorescence microscopy (2PFM) has become a powerful technique in bioimaging for non-invasive imaging and potential diagnosis and treatment of a number of diseases via excitation in the near-infrared (NIR) region. The fluorescence emission upon two-photon absorption (2PA) is quadratically dependent with the intensity of excitation light (compared to the linear dependence in the case of one-photon absoprtion), offering several advantages for biological applications over the conventional one-photon absorption (1PA) due to the high 3D spatial resolution that is confined near the focal point along with less photodamage and interference from the biological tissues at longer wavelength (~700-900 nm). Hence, efficient 2PA absorbing fluorophores conjugated with specific targeting moieties provides an even better bioimaging probe to diagnose desired cellular processes or areas of interest The αVβ3 integrin v adhesive protein plays a significant role in regulating angiogenesis and is over-expressed in uncontrolled neovascularization during tumor growth, invasion, and metastasis. Cyclic-RGD peptides are well-known antagonists of αVβ3 integrin which suppress the angiogenesis process, thus preventing tumor growth. In Chapter 5 the synthesis, photophysical studies and bioimaging is reported for a versatile norbornene-based block copolymer multifunctional scaffold containing biocompatible (PEG), two-photon fluorescent (fluorenyl), and targeting (cyclic RGD peptide) moieties. This water-soluble polymeric multi scaffold probe with negligible cytotoxicity exhibited much stronger fluorescence and high localization in U87MG cells (that overexpress integrin) compared to control MCF7 cells. The norbornene-based polymers and copolymers have quite remarkable versatility for the creation of advanced functional magnetic, photonic, and biophotonic materials.

yes / 2D materials such as graphene, LAPONITE® clays or molybdenum disulfide nanosheets are of extremely high interest to the materials community as a result of their high surface area and controllable surface properties. While several methods to access 2D inorganic materials are known, the investigation of 2D organic nanomaterials is less well developed on account of the lack of ready synthetic accessibility. Crystallization-driven self-assembly (CDSA) has become a powerful method to access a wide range of complex but precisely-defined nanostructures. The preparation of 2D structures, however, particularly those aimed towards biomedical applications, is limited, with few offering biocompatible and biodegradable characteristics as well as control over self-assembly in two dimensions. Herein, in contrast to conventional self-assembly rules, we show that the solubility of polylactide (PLLA)-based amphiphiles in alcohols results in unprecedented shape selectivity based on unimer solubility. We use log Poct analysis to drive solvent selection for the formation of large uniform 2D diamond-shaped platelets, up to several microns in size, using long, soluble coronal blocks. By contrast, less soluble PLLA-containing block copolymers yield cylindrical micelles and mixed morphologies. The methods developed in this work provide a simple and consistently reproducible protocol for the preparation of well-defined 2D organic nanomaterials, whose size and morphology are expected to facilitate potential applications in drug delivery, tissue engineering and in nanocomposites. / University of Warwick, Materials GRP, EPSRC, The Royal Society, ERC

Yes / In this work we report a facile method to prepare a fluorescence active self-healable hydrogel via incorporation of fluorescence responsive ionic block copolymers (BCPs). Ionic block copolymers were prepared via a combined effect of ring opening polymerization (ROP) of ε-caprolactone and xanthate mediated reversible addition–fragmentation chain transfer (RAFT) polymerization. Here polycaprolactone (PCL) was modified with xanthate to prepare a PCL based macro-RAFT agent and then it was utilized to prepare block copolymers with cationic poly(2-(methacryloyloxy)ethyltrimethyl ammonium chloride) (PCL-b-PMTAC) and anionic poly(sodium 4-vinylbenzenesulfonate) (PCL-b-PSS). During the block formation, the cationic segments were randomly copolymerized with a trace amount of fluorescein O-acrylate (FA) (acceptor) whereas the anionic segments were randomly copolymerized with a trace amount of 9-anthryl methylmethacrylate (AMMA) (donor) to make both the segments fluorescent. The block copolymers form micelles in a DMF : water mixture (1 : 4 volume ratio). The ionic interaction of two BCPs was monitored via Förster resonance energy transfer (FRET) and zeta potential measurements. The oppositely charged BCPs were incorporated into a polyacrylamide (PAAm) based hydrogel that demonstrated self-healing behavior and is also highly fluorescent. / IIT Kharagpur and MRC (MR/N501888/2)

In this thesis, we use the self-consistent field theory (SCFT) to study neutral and charged block copolymer melts and blends in thin films and bulk. We showcase the utility of the SCFT by applying it to a number of different model systems. In our first study, we examined the elastic properties of multi-component bilayer membranes composed of amphiphilic AB/ED diblock copolymers. We focused on the effects of chain architecture and interactions between the amphiphilic molecules on the line tension or edge energy of a membrane pore. We discovered a direct relationship between the effective volume of the amphiphilic molecules, which is dictated by their architecture, and the line tension. We found that the addition of cone-shaped molecules to the membrane results in a decrease in the line tension. The opposite effect is seen for inverse cone-shaped amphiphiles, where an increase in their concentration results in an increase of the line tension. Studies two and three fall under the theme of directed self assembly of block copolymer thin films. First we examined the effects of ion concentration on the strength of the external electric field required to reori- ent lamellar domains from the parallel to the perpendicular orientation. The change in the critical electric field is found to be dependent on whether the neutral or charged polymer species is favoured by the top and bottom surfaces. In the second study, we examined the mechanism of using the entropic effect to direct the self assembly of micro domains in star block copolymer thin films. We control the architecture of star block copolymers by varying the number of arms, ranging from a linear chain with 1-arm to 4-arm star block copolymers. Using both experiments and SCFT, we showed that the entropic effect is enhanced in star block copolymer blends with greater number of arms. Furthermore, we showed that the entropic effect can be used to direct the self assembly of micro domains perpendicular to the substrate. In our last study, we examined the unbinding transition of the α-BN phase in pentablock terpolymer/ homopolymer blends. We constructed a phase diagram of the system as a function of homopolymer con- centration. We discovered that the unbinding transition is preempted by the macrophase separation of the blends into block copolymer rich/ homopolymer rich domains. The results presented in this thesis help advance our understanding of various properties of polymeric systems, such as the elastic properties of multi-component membranes, directed self assembly in block copolymer thin films and the phase behaviour of block copolymers in bulk. / Thesis / Doctor of Philosophy (PhD)

No description available.

The use of waste gas such as carbon dioxide (CO2) to prepare useful and valuable polymers benefits both the economy and the environment. Various strategies have been developed to reduce CO2 emission as well as to transfer CO2 into high-value products. CO2/epoxide copolymerization is one of the most promising methods of not only reducing the CO2 emission from the atmosphere but also producing biodegradable CO2-based materials that are CO2 as source-abundant, renewable, cheap, non-flammable and non-toxic. However, the activation of CO2 is one of several problems associated with the polymerization of CO2 due to its stability as a thermodynamic end product. Herein, my dissertation describes the effectiveness of new lithium/phosphazene complexes to generate highly active species for CO2/epoxide copolymerization and to capture/activate CO2 molecules for the nucleophilic attack of the active species. Well-defined polycarbonates and polycarbonate-based block copolymers are produced that have control of molecular weights, unimodal distributions and narrow molecular weight distributions (Chapter 3 and 4). Besides, these complexes provide access to prepare CO2-based triblock copolymers that are powerful candidates to serve as the next generation of thermoplastic elastomers (Chapter 4). Additionally, these complexes are applied for the anionic polymerization of petrochemical-based sources such as styrene and dienes producing polymers in faster rate of polymerization with control of molecular characteristics (Chapter 2). A general introduction of polymers and their classification based on composition, chemical structure, mechanical properties, degradability, source, applications, and preparative methods, is covered in Chapter 1

Multiblock [-A-B-]_n copolymers of bisphenol-A polycarbonate (I) and several poly(arylether sulfones) (II) have been investigated. The copolymers [see document for a diagram of copolymers (I) and (II)] were prepared from hydroxyl terminated oligomers (4,000 < M̅_n < 30,000) by an interfacial technique which utilized phosgene as the coupling agent. Characterization of the oligomers and copolymers included end group analysis, membrane osmometry, and gel permeation chromatography. One of the most interesting aspects of block copolymers is their ability to undergo microphase separation above a critical block length. Either one or two phase block copolymers can be prepared by controlling the molecular weights of the parent oligomers. In the bisphenol-A polycarbonate/bisphenol-A polysulfone system, for example, strictly one phase materials, with only one intermediate glass transition temperature, were obtained at block lengths of less than 10,000 g/mole. Two-phase copolymers resulted when blocks exceeding 20,000 g/mole were coupled. Copolymers comprised of intermediately sized blocks (M̅_n ≃16,000) could be obtained as either single or multiphase systems depending upon their previous thermal history. Homogeneous films, with a single intermediate Tg, were obtained via solution casting, whereas compression molding provided films exhibiting two Tg's. Subsequent DSC studies pointed out that microphase separation could be thermally, and irreversibly, induced by annealing above the Tg of the polysulfone blocks (190°C). Since polycarbonate and polysulfone are leading examples of tough, amorphous thermoplastics, the effects of microphase separation on the tensile, impact, and melt flow properties of the copolymers were investigated. A novel falling weight impact tester was designed and constructed to meet the needs of this study. The device was fully instrumented to provide a deceleration-time plot of the impact process by means of an accelerometer mounted in the projectile. Fracture energies for commercial homopolymers and graphite reinforced composites, in addition to polysulfone-polycarbonate block copolymers, were calculated from the impact curves. Both the tensile and impact properties of the copolymers improved with increasing polycarbonate content. Both single and multiphase materials were ductile and transparent as opposed to physical blends of the two. oligomers which were opaque and possessed poor mechanical properties. No differences due to microphase separation were observed in either the tensile or impact studies. The homogeneous copolymers displayed melt viscosities and activation energies nearly equal to those of the homopolymers. Much greater viscosities and activation energies were exhibited by the phase separated materials indicating that the heterogeneity was retained in the melt. / Ph. D.

Ion-containing macromolecules continue to stimulate new opportunities for emerging electro-active applications ranging from high performance energy devices to water purification membranes. Progress in polymer synthesis and engineering now permit well-defined, ion-containing macromolecules with tunable morphologies, mechanical performance, ion conductivity, and 3D structure in order to address these globally challenged technologies. Achieving tailored chemical compositions with high degrees of phase separation for optimizing conductivity and water adsorption remains a constant synthetic challenge and presents an exciting opportunity for engineering sophisticated macromolecular architectures. This dissertation will introduce unprecedented charged polymers using conventional free radical and anionic polymerization to incorporate ionic functionalities based on phosphonium cations. This new class of copolymers offers unique properties with ionic functionality for tailorable electro-active performance. / Ph. D.