<p>  </p> <p>With economies shifting towards net-zero carbon emissions, there is an increased interest in carbon-free energy carriers. Hydrogen is a potential carbon-free energy source. However, it poses several production, infrastructural, and safety challenges. Ammonia blends have been identified as a potential hydrogen carrier and fuel for gas turbine combustion. Partially cracked ammonia mixtures consist of large quantities of hydrogen that help overcome the disadvantages of pure ammonia combustion. The presence of nitrogen in the fuel blends leads to increased NO_x emissions, and therefore lean premixed combustion is necessary to curb these emissions. Understanding the flame features, precursors, and dynamics of blowout of such blends due to lean conditions is essential for stable operation, lean blowout prediction, and control. </p> <p><br></p> <p>In this study, high-fidelity large eddy simulations for turbulent premixed ammonia/hydrogen/nitrogen-air flames in an axisymmetric, unconfined, bluff-body stabilized burner are performed to gain insights into lean blowout dynamics. Partially cracked ammonia (40% NH₃, 45% H₂, and 15% N₂, by volume) is chosen as fuel since its laminar burning velocity is comparable to CH4-air mixtures. A finite rate chemistry model with a detailed chemical kinetic mechanism (36 species and 247 reactions) is utilized to capture characteristics of various species during blowout. A comprehensive study of the flow field and flame structure for a weakly stable burning at an equivalence ratio of 0.5 near the blowout limit is presented. Further, the effects of blowout on the heat release rate, vorticity, distribution of major species, and ignition radicals are studied at four time instances at blowout velocity of 70 m/s. Since limited data is available on turbulent premixed combustion of partially cracked ammonia, such studies are essential in understanding flame behavior and uncertainties with regard to blowout.</p>

This thesis aims at improving our knowledge on swirl combustors. The work presented here is based on Large Eddy Simulations (LES) coupled to an advanced combustion model: the Conditional Moment Closure (CMC). Numerical predictions have been systematically compared and validated with detailed experimental datasets. In order to analyze further the physics underlying the large numerical datasets, Proper Orthogonal Decomposition (POD) has also been used throughout the thesis. Various aspects of the aerodynamics of swirling flames are investigated, such as precession or vortex formation caused by flow oscillations, as well as various combustion aspects such as localized extinctions and flame lift-off. All the above affect flame stabilization in different ways and are explored through focused simulations. The first study investigates isothermal air flows behind an enclosed bluff body, with the incoming flow being pulsated. These flows have strong similarities to flows found in combustors experiencing self-excited oscillations and can therefore be considered as canonical problems. At high enough forcing frequencies, double ring vortices are shed from the air pipe exit. Various harmonics of the pulsating frequency are observed in the spectra and their relation with the vortex shedding is investigated through POD. The second study explores the structure of the Delft III piloted turbulent non-premixed flame. The simple configuration allows to analyze further key combustion aspects of combustors, with further insights provided on the dynamics of localized extinctions and re-ignition, as well as the pollutants emissions. The third study presents a comprehensive analysis of the aerodynamics of swirl flows based on the TECFLAM confined non-premixed S09c configuration. A periodic component inside the air inlet pipe and around the central bluff body is observed, for both the inert and reactive flows. POD shows that these flow oscillations are due to single and double helical vortices, similar to Precessing Vortex Cores (PVC), that develop inside the air inlet pipe and whose axes rotate around the burner. The combustion process is found to affect the swirl flow aerodynamics. Finally, the fourth study investigates the TECFLAM configuration again, but here attention is given to the flame lift-off evident in experiments and reproduced by the LES-CMC formulation. The stabilization process and the pollutants emission of the flame are investigated in detail.