[pt] Neste trabalho apresenta-se um estudo experimental de escoamentos turbulentos quimicamente inertes e reativos em um queimador tipo obstáculo. O objetivo principal é a caracterização do escoamento através da obtenção do campo de velocidade instantâneo utilizando técnicas óticas não intrusivas. As técnicas empregadas foram a Velocimetria Laser Doppler (LDV) e a Velocimetria por Imagem de Partículas (PIV), as quais possibilitaram a medição das componentes transversal e longitudinal da velocidade do escoamento em estudo. Os resultados experimentais obtidos foram comparados com aqueles oriundos da simulação numérica usando um programa computacional existente. São analisados os acordos e as discrepâncias obtidas, colocando-se em evidência a capacidade e as limitações de cada uma das técnicas utilizadas. / [en] This work presents an experimental study of chemically inert and reactive turbulent flows in a Bluff-Body burner. The main objective is the characterization of the flow through of the measurement of instantaneous velocity fields by using non intrusive optical techniques. The techniques employed were Laser Doppler Velocimetry (LDV) and Particle Image Velocimetry (PIV), which makes possible the measurement of the transversal and longitudinal components of the flow velocity. The experimental results were compared with those obtained from a numerical simulation using a comercial computational program. The agreements and discrepancies obtained between the two experimental techniques and from experiments and computation were demonstrated and analized.

[pt] O presente trabalho tem por objetivo a realização de experimentos e simulações numéricas para estudar a interação da turbulência e da combustão em uma chama não pré-misturada de hidrogênio no ar estabilizada a jusante de um corpo rombudo. Para tanto, são utilizadas, simultaneamente, as técnicas de PIV, para a determinação de dois componentes da velocidade, e a técnica de PLIF para a determinação da intensidade de fluorecência do radical químico OH, que é um bom indicador da localização da frente de chama. São avaliados os métodos de pós processamento dos resultados do PIV com o intuito de maximizar a resolução espacial da técnica e ao mesmo tempo remover o maior número de vetores espúrios dos campos de velocidade instantâneos. Paralelamente, o queimador é modelado no software ANSYS/FLUENT e os resultados de simulação validados por comparação com os resultados experimentais. Modelos baseados nas médias de Reynolds são empregados para a caracterização da turbulência e o modelo de elementos de chama é adotado para a descrever a combustão. Os resultados experimentais indicam que, para as vazões de ar e hidrogênio adotadas, a combustão ocorre no regime de elementos de chama, onde a frente de chama apresenta algumas dobras, mas sem descontinuidades. Os resultados das simulações com combustão não obtiveram boa concordância com os resultados experimentais, indicando que a malha de cálculo precisa ser aprimorada. / [en] The aim of this work is to carry out experiments and numerical simulations to study the turbulence-combustion interaction in a nonpremixed hydrogen-air ame stabilized in a bluff body wake. For this purpose, are used a PIV technique for the determination of two velocity components and a PLIF technique to determine the uorescence intensity of the chemical species OH, which is a good indicator of the flame front location. PIV post-processing methods are evaluated in order to maximize the spatial resolution of the technique and to remove spurious instantaneous velocity vectors. In addition, the burner is modeled in ANSYS / FLUENT and the simulation results are validated by comparisons with the experimental results. Models based in the Reynolds avareges are used to characterize the turbulence and a flamelet model is adopted to describe combustion. The experimental results indicates that, for the ow rates of air and hydrogen adopted, combustion occurs in the flamelet regime, where the flame front is wrinkled, but without discontinuities. The reactive cases simulations did not agree with the experimental results, indicating that the computational mesh needs to be improved.

This thesis deals with the problem of designing vortex flow meter for a nominal range of 40 l.min-1. It describes the problems of vortex bodies and choice of methods for detection of vortices. The thesis includes solution of various problems in the design, which were published in scientific articles or patents. The following describes the design solution vortex flow meter for the specified range, which uses ultrasonic sensors to vortices detection. The proposed flow meter is calibrated with reference flow meter and compared with commercially produced vortex flow by the TST electronics and Burkert companies, which are designed for the specified ranges.

The interaction between a bluff body and the impinging fluid flow, can involve detached boundary layers, massive flow separations, free shear layers, development of recirculation zones and formation of a highly disturbed and complex region downstream of the bluff body, which can be categorized as wake. The present research aims to experimentally investigate such fluid-structure interaction and provide insight into the wake structure of two bluff bodies. To this end, the airwake over the helicopter platform of a Canadian Coast Guard (CCG) polar icebreaker was studied using high-speed particle image velocimetry (PIV). The experiments were conducted on a scaled model of the polar icebreaker situated on a costume-built and computer-controlled turntable, which provided the ability to accurately change the incidence angle of the impinging flow with a given rate of change for incidence angle. Quantitative flow field data were obtained in several vertical and horizontal planes. The obtained velocity field was then used to calculate the time-averaged flow structure and turbulence metrics over the helicopter platform of the vessel. The present work compared the effects of two types of inflow conditions: (i) a uniform flow and (ii) a simulated atmospheric boundary layer (ABL) on the flow structure over the helicopter platform of the ship. Moreover, for the bluff scaled model, the effects of the Reynolds number on the wake structure and the flow patterns were investigated. The incidence angle (α) between the oncoming flow and the orientation of the ship varied between 0° to 330° with the increment of 30°. It was observed that higher maximum values of the turbulence intensity were associated with the simulated ABL. Moreover, it was found that for both inflow conditions, the incidence angle of 300o corresponded to the highest turbulence levels over the helicopter platform. Building on the results obtained for a stationary vessel in the simulated ABL, this work aimed to quantify the effects of the unsteady change in the direction of the impinging wind, simulated by rotating the model at a certain rate, . It was observed that the increase of the rate of change of the inflow direction resulted in an increase of the turbulent intensity over the helicopter platform. However, an exception was observed for the case of α = 60°, where clockwise rotation of the ship model with respect to the inflow exposed the helicopter platform to increased turbulent velocity fluctuations, while counterclockwise rotation diminished the flow unsteadiness over the helicopter platform. Moreover, aiming to identify the origins of the unsteady forces applied on bluff elongated plates with high chord-to thickness ratio (c/t = 23) at zero incidence, direct force measurement as well as PIV were used to identify the effect of transverse perforations on the flow-induced loading on the flow structure in the near-wake of the plates. The experiments were conducted in a water channel, where the plates were located at the center of channel, parallel to the upstream flow direction. Plates with various characteristic diameter of the perforation as well as a reference case without perforations were considered. The spectra of the trailing-edge vortex shedding and flow-induced forces were compared and it was observed that the vortex shedding frequencies were in very good agreement with those of the measured flow-induced forces for all considered perforation patterns. Thus, it was determined that the trailing-edge vortex shedding was the main mechanism of generating the unsteady loading on the plates. The staggered patterns of the perforations created a three-dimensional flow structure at the vicinity of the trailing edge and in the near wake, which was investigated using PIV at several data acquisition planes. It was found that in the cross-sectional planes corresponding to the close proximity of the perforations to the downstream edge, the periodic trailing-edge vortex shedding were suppressed. Furthermore, it was observed that for small perforations, the velocity fluctuations in the near wake were enhanced. However, further increase of the perforation diameter led to suppression of the velocity fluctuations. / Graduate

In many situations, fluid flows can exhibit a wide range of temporal and spatial phenomena. It has become common to extract physically important features, called modes, as a first step in the analysis of flows with high complexity. One of the most prominent modal analysis techniques in the context of fluid dynamics is Proper Orthogonal Decomposition (POD), which enables extraction of energetically coherent structures present in the flow field. This method does, however, suffer from the lack of connection with the mathematical theory of dynamical systems and its utility in the analysis of arbitrarily complex flows might therefore be limited. In the present work, we instead consider application of the Koopman Mode Decomposition (KMD), which is an approach based on spectral decomposition of the Koopman operator. This technique is employed for modal analysis of the incompressible, two-dimensional ow past two side-by-side cylinders at Re = 60 and with a non-dimensional cylinder gap spacing g* = 1. This particular configuration yields a wake ow which exhibits in-phase vortex shedding during finite time, while later transforming into the so-called flip-flopping phenomena, which is characterised by a slow, periodic switching of the gap ow direction during O(10) vortex shedding cycles. The KMD approach yields modal structures which, in contrary to POD, are associated with specific oscillation frequencies. Specifically, these structures are here vorticity modes. By studying these modes, we are able to extract the ow components which are responsible for the flip-flop phenomenon. In particular, it is found that the flip-flop instability is mainly driven by three different modal structures, oscillating with Strouhal frequencies St1 = 0:023, St2 = 0:121 and St3 = 0:144, where it is noted that St3 = St1 + St2. In addition, we study the in-phase vortex shedding regime, as well as the transient regime connecting the two states of the flow. The study of the in-phase vortex shedding reveals| - not surprisingly - the presence of a single fundamental frequency, while the study of the transient reveals a Koopman spectrum which might indicate the existence of a bifurcation in the phase space of the flow field; this idea has been proposed before in Carini et al. (2015b). We conclude that the KMD offers a powerful framework for analysis of this ow case, and its range of applications might soon include even more complex flows.

In order to study three-dimensional unsteady turbulent flow fields such as the wakes of bluff bodies, a Digital Particle Image Velocimetry (DPIV) system was developed. This system allows non-intrusive two-dimensional and time varying velocity measurements. Software and hardware modifications necessary to enhance the capabilities of the system were preformed, resulting in increased frequency resolution. However, due to hardware limitations and limitations inherited from the implementation of the method, space resolution is reduced. Subsequently, digital image processing tools to improve the space resolutions were developed. The advantages and limitations of the method for the study of turbulent flows are presented in detail. The developed system is employed in the documentation of time-varying turbulent flow fields. Initially we study the spanwise variation of the near wake of a low-aspect ratio, surface-mounted, circular cylinder piercing a free surface. The asymmetry of the end conditions combined with the natural unsteadiness of the vortex shedding generates a very complex flow filed which is difficult to study with conventional methods. By employing the aforementioned system we are able to reveal a departure of the two-dimensional character of the flow in the form of oblique vortex shedding. The effect of free surface on the vortex formation length and on the vortex reconnection process is documented. Near the free surface the alternate mode of vortex shedding is suppressed, leading to simultaneous shedding of vortices in the wake. Indications of vortex dislocations and change of the vortex axis in order to reconnect to the free surface are observed. Finally, a novel approach of reconstructing the three-dimensional, time -varying volume of the flow field by obtaining simultaneous measurements of Laser Doppler Velocimetry and Particle Image Velocimetry planes is presented. The same field is investigated with focus on the streamwise structures. Three-dimensional streamwise vortical structures are known to exist due to instabilities of plane shear layers. Similar streamwise vortices, also known as braid vortices have been observed in the past in the wake of circular cylinders with symmetric boundary conditions. The present spatio-temporal analysis demonstrated coexistence of two types of streamwise vortices in the wake, bilge and braid type of vortices. These may be due to the three dimensionality introduced by the free surface. In addition, the sufficient time resolution allowed the detection of the primary Von-Karman vortex through a plane of interrogation normal to the free stream, thus revealing the spanwise variation of the vortex shedding and its evolution at different downstream stations. The combination of the effect of the asymmetric boundary conditions with a free surface is investigated by adding one more source of three-dimensionality in terms of inclination of the cylinder axis. Hydrogen-bubble and particle-flow visualizations are preformed in combination with Laser-Doppler Velocimetry measurements. From both qualitative and quantitative results the effects of inclination and Froude number are documented. It is proved that the vortex shedding is suppressed for high values of the Froude number, however the inclination counteracts the vortex suppression and favors the vortex shedding mechanism. In addition, in the region of the no-slip boundary condition the flow is dominated by the effect of the horseshoe vortex. The case of a three-dimensional separated flow over a surface-mounted prism is investigated using a modified version of the system. The character of the separated from the leading edge corner shear layer and the formed separation bubble are documented in space and time along the mid-plane of symmetry of the body. Three different flows corresponding to different Reynolds numbers are studied. The unsteadiness of the flow is presented indicating a pseudo-periodic character. Large-scale, low-frequency oscillations of the shear layer that have been observed in the past using point measurement methods are now confirmed by means of a whole field velocity measurement, technique allowing a holistic view of the flow. In addition, the unsteadiness of the point of reattachment is associated with the flapping of the shear layer and the shedding of vorticity in the wake. Finally, it is demonstrated that the apparent vortex shedding mechanism of such flows is dependent on the interaction of the primary vortex of the separation bubble with a secondary vortex formed by the separation of the reverse flow boundary layer. By performing measurements with such time and space resolution the inadequacy of time averaged or point measurement methods for the treatment of such complex and unsteady flow fields becomes evident. In final case we employ Particle-Image Velocimetry to show the effect of unsteady excitation on two-dimensional separated flow over a sharp edged airfoil. It is proved that such an approach can be used to effectively control and organize the character of the flow, potentially leading to lift increase and drug reduction of bluff bodies / Ph. D.

No description available.

Large-eddy simulation (LES) and unsteady Reynolds-averaged Navier-Stokes (URANS) calculations have been performed to investigate the effects of different mathematical models for scalar variance and its dissipation rate as applied to both a non-reacting bluff-body turbulent flow and an extension to a reacting case. In the conserved scalar formalism, the mean value of a thermo-chemical variable is obtained through the PDF-weighted integration of the local description over the conserved scalar, the mixture fraction. The scalar variance, one of the key parameters for the determination of a presumed β-function PDF, is obtained by solving its own transport equation with the unclosed scalar dissipation rate modelled using either an algebraic expression or a transport equation. The proposed approach is first applied to URANS and then extended to LES. Velocity, length and time scales associated with the URANS modelling are determined using the standard two-equation k-ε transport model. In contrast, all three scales required by the LES modelling are based on the Smagorinsky subgrid scale (SGS) algebraic model. The present study proposes a new algebraic and a new transport LES model for the scalar dissipation rate required by the transport equation for scalar variance, with a time scale consistent with the Smagorinsky SGS model.

Large-eddy simulation (LES) and unsteady Reynolds-averaged Navier-Stokes (URANS) calculations have been performed to investigate the effects of different mathematical models for scalar variance and its dissipation rate as applied to both a non-reacting bluff-body turbulent flow and an extension to a reacting case. In the conserved scalar formalism, the mean value of a thermo-chemical variable is obtained through the PDF-weighted integration of the local description over the conserved scalar, the mixture fraction. The scalar variance, one of the key parameters for the determination of a presumed β-function PDF, is obtained by solving its own transport equation with the unclosed scalar dissipation rate modelled using either an algebraic expression or a transport equation. The proposed approach is first applied to URANS and then extended to LES. Velocity, length and time scales associated with the URANS modelling are determined using the standard two-equation k-ε transport model. In contrast, all three scales required by the LES modelling are based on the Smagorinsky subgrid scale (SGS) algebraic model. The present study proposes a new algebraic and a new transport LES model for the scalar dissipation rate required by the transport equation for scalar variance, with a time scale consistent with the Smagorinsky SGS model.

A new aerodynamic device, based on flow interference effects, is studied in order to significantly improve the cornering performance of racing motorcycles in MotoGP. After a brief overview on why standard downforce devices cannot be used on motorcycles, the new idea is introduced and a simplified mechanic analysis is provided to prove its effectiveness. The concept is based on the use of anhedral wings placed on the front fairing, with the rider acting as an interference device, aiming to reduce the lift generation of one wing. Numerical calculations, based on Reynolds-averaged Navier-Stokes equations, are performed on simplified static 2D and 3D cases, as a proof of concept of the idea and as a preparation for further analysis which may involve experimental wind-tunnel testing. The obtained results show that the flow interference has indeed a significant impact on the lift on a single wing. For some cases the lift can be reduced by 70% to over 90% - which strengthens the possibility of a realistic implementation. / Ett nytt aerodynamisk koncept som nyttjar effekter av flödesinterferenser är utvärderat i syfte att på ett noterbart sätt förbättra en roadracing-motorcykels kurtagningsmöjligheter. Efter en kort genomgång av varför diverse klassiska "downforce" lösningar ej är applicerbara på motorcyklar, presenteras det nya konceptet. Varpå en mekanisk analys genomförs i syfte att se över dess tillämpbarhet. Konceptet bygger på anhedrala vingar som placeras på den främre kåpan, där föraren agerar som ett interferensobjekt, och försöker störa ut lyftkraften som den ena vingen genererar. Numeriska beräkningar baserade på RANS-ekvationer är utförda i förenklade statiska 2D och 3D fall. Som ett vidare steg rekommenderas vindtunneltester. Resultaten visar att flödesinterferenser är ytterst märkbara för vingar och i vissa fall kan lyftkraften reducerats med 70-90%. Detta förstäker möjligheten för en realistisk implementering.