This thesis concerns the synthesis of N^N- and N^C-chelate four coordinate organoboron compounds and the investigation of their photophysical and photochemical properties. The preparation of a novel BODIPY derivative possessing unusual dual emissive property has been accomplished. The origin of the dual emission was determined through a detailed investigation. The use of the new BODIPY compound as a highly effective surface ligand for achieving highly uniform and monodispersed PbS nanoparticles has been demonstrated. Electronic communication between BODIPY ligands at the nanoparticle surface and the PbS core has also been established. The incorporation of BODIPY-bearing PbS nanoparticles into a simple photovoltaic device was shown to enhance the device’s performance. The preparation of two new BODIPY molecules decorated with either BMes2(vinyl) units or N^C-chelate boryl units has been achieved. Substitution at the meso or the 2,6-positions of the BODIPY core resulted in a significant shift of the emission energy with respect to that of the parent compound. In contrast, replacement of the fluorine substituents with BMes2-vinyl or B(ppy)Mes2-alkynyl groups did not affect the emission wavelength. Both molecules exhibited excellent photophysical properties in solution and the solid state. The BMes2(vinyl) unit greatly enhances BODIPY fluorescence efficiency in a PMMA matrix. Meanwhile, the photoreactivity of the N^C-chelate boryl unit is switched off completely by the BODIPY ligand via intramolecular energy transfer. A new class of N^C-chelate organoboron compounds have been synthesized. This class of compounds has been found to display unprecedented photo-reactivity, namely, photo-elimination reactions, which enabled the synthesis of new B-N substituted phenanthrene compounds in high conversion yields. The new B-N substituted phenanthrene compounds exhibited excellent absorptive and emissive properties with potential applications in optoelectronic devices. / Thesis (Ph.D, Chemistry) -- Queen's University, 2013-04-22 15:53:14.091

Poly(azolyl)borate ligands have proven to be extremely popular ligands since their introduction by Trofimenko in the late 60´s. The basic skeleton of these ligands involves usually three heterocycle units linked to a central boron apex via the azole nitrogen atoms. These ligands have been applied in diverse research areas such as homogeneous catalysis, materials science and bio-inorganic chemistry. More than 2000 papers, including books and reviews regarding the properties of these compounds, have been published. However, only a few synthetic methods for the preparation of such ligands have been reported and only a few examples of chiral borate-centred ligands are known. This thesis deals with the development of a novel synthetic route to tripodal borate ligands using B(NMe2)3 as the boron source. The mechanism of the reaction of this borane with azole heterocycles has been established by exploring the reactivity of a range of azoles. One of the major features of this new synthetic protocol is that it allows the formation of chiral tripodal ligands where the chiral groups are located either at the forth position at the boron atom or at the azole heterocycles. Coordination studies of the ligands have been undertaken and the metal complexes have been studied by a combination of spectroscopic and X- ray diffraction techniques. Preliminary application of the most representative ligands in the Asymmetric Transfer Hydrogenation (ATH) of prochiral ketones has been undertaken in collaboration with Prof. Dieter Vogt at the Technical University of Eindhoven.

This study details the dielectrophoretic assembly and mechanical characterization of boron nitride nanotubes on silicon chips with gold electrodes. The chips were fabricated from 4in round silicon wafers with a 100nm-thick low stress silicon nitride insulating layer on the top and bottom. The electrodes were patterned using photo- and electron-beam lithography and dry etching, and the wafers were cut into 4 x 6mm chips. The boron nitride nanotubes studied were obtained from NIA and were synthesized via a unique pressurized vapor/condensor method, which produced long, small-diameter BNNTs without the use of a catalyst. These nanotubes were studied due to their desirable mechanical and electrical properties, which allow for unique applications in various areas of science, engineering, and technology. Applications span from magnetic manipulation to the formation of biocomposites, from nano-transistors to humidity and pH sensors, and from MRI contrast agents to drug delivery. The nanotubes and nanotube bundles characterized were suspended over gaps of 300 to 500nm. This study was unique in that assembly was performed using dielectrophoresis, allowing for batch fabrication of chips and devices. Also, stiffness measurements were performed using AFM, eliminating the reliance of other methods upon electron microscopes, and allowing for imaging and measurements to occur simultaneously and at high resolution. It was found that DEP parameters of V = 2.0Vpp, f = 1kHz, and t = 2min provided the best results for mechanical testing. The nanotubes tested had suspended lengths of 300nm, the width of the electrode gap, and diameters of 15–65nm. Chips were imaged with both scanning electron microscopy and atomic force microscopy. Force-displacement measurements with atomic force microscopy were used to find stiffness values in the range of 1–16N/m. These stiffness values, when plugged into a simple double-clamped beam model, indicated Young’s moduli of approximately 1–1600GPa. Within this wide range, it was shown that a decrease in diameter strongly correlated exponentially to an increase in Young’s modulus. Work in this study was divided between assembly and characterization. Therefore, a lot of time was spent working to optimize dielectrophoresis parameters, followed by SEM and AFM imaging. Parameters that were adjusted included DEP voltage and time, pre-DEP sonication times, as well as adding a centrifuging procedure to attempt to better separate nanotube bundles in solution. Another method discussed but not pursued was the use of surfactants to agitate the solution, thus separating the nanotubes. The reason this material in particular was so difficult to separate was twofold. First, the small size of the nanotubes—individual BNNTs have diameters on the order of ∼5 nanometers—generates very strong nanoscale van der Waals forces holding the nanotubes together. Larger nanotubes—with diameters on the order of 50 to 100nm or more—suffer less from this problem. Also, the dipoles created by the boron-nitrogen bonds cause attraction between adjacent nanotubes. The results shown in this thesis include DEP parameters, SEM and AFM images, and force- displacement curves leading to nanotube stiffness and Young’s modulus values. The force-displacement tests via AFM are also detailed and explained.

Master of Science / Department of Mechanical and Nuclear Engineering / Jeffrey Geuther / William L. Dunn / The properties of hexagonal boron nitride (h-BN) as a semiconductor neutron detection medium were investigated. Single h-BN crystal domains were synthesized by the Chemical Engineering department at Kansas State University (KSU) using crystallization from molten metal solutions. At Texas Tech University (TTU), a detector was fabricated using epitaxial h-BN growth on a sapphire substrate where metallic micro-strip contacts 5 [mu]m apart and 5 nm thick where deposited onto the un-doped h-BN. In this research both the crystal domains synthesized at KSU and the detector fabricated at TTU were tested for neutron response. Neutron irradiation damage/effects were studied in pyrolytic h-BN by placing samples in the central thimble of the TRIGA MARK II reactor at KSU and irradiating at increasing neutron fluences. The domains synthesized at KSU as well as the detector fabricated at TTU showed no response to neutron activity on a MCA pulse height spectrum. Conductivity analysis showed abrupt increases in the conductivity of the pyrolytic h-BN at around a fluence of 10[superscript]1[superscript]4 neutrons per cm[superscript]2. Bandgap analysis by photoluminescence on the irradiated pyrolytic h-BN samples showed shifts in energy due to towards plane stacking disorders upon neutron irradiation. Future efforts may include the introduction of dopants in h-BN growth techniques for charge carrier transport improvement, and mitigation of plane stacking disorders.

Doctor of Philosophy / Department of Chemical Engineering / Vikas Berry / Nanoscale materials invite immense interest from diverse scientific disciplines as these provide access to precisely understand the physical world at their most fundamental atomic level. In concert with this aim of enhancing our understanding of the fundamental behavior at nanoscale, this dissertation presents research on three nanomaterials: Gold nanoparticles (GNPs), Graphene and ultra-thin Boron Nitride sheets (UTBNSs). The three-fold goals which drive this research are: incorporating mobility in nanoparticle based single-electron junction constructs, developing effective strategies to functionalize graphene with nano-forms of metal, and exfoliating ultrathin sheets of Boron Nitride. Gold nanoparticle based electronic constructs can achieve a new degree of operational freedom if nanoscale mobility is incorporated in their design. We achieved such a nano-electromechanical construct by incorporating elastic polymer molecules between GNPs to form 2-dimensional (2-D) molecular junctions which show a nanoscale reversible motion on applying macro scale forces. This GNP-polymer assembly works like a molecular spring opening avenues to maneuver nano components and store energy at nano-scale. Graphene is the first isolated nanomaterial that displays single-atom thickness. It exhibits quantum confinement that enables it to possess a unique combination of fascinating electronic, optical, and mechanical properties. Modifying the surface of graphene is extremely significant to enable its incorporation into applications of interest. We demonstrated the ability of chemically modified graphene sheets to act as GNP stabilizing templates in solution, and utilized this to process GNP composites of graphene. We discovered that GNPs synthesized by chemical or microwave reduction stabilize on graphene-oxide sheets to form snow-flake morphologies and bare-surfaces respectively. These hybrid nano constructs were extensively studied to understand the effect and nature of GNPs’ interaction with graphene, and applied to address the challenge of dispersing bare-surfaced GNPs for efficient liquid-phase catalysis. We also revisited the functionalization of graphene and present a non-invasive surface introduction of interfaceable moieties. Isostructural to graphene, ultrathin BN sheet is another atomic-thick nanomaterial possessing a highly diverse set of properties inconceivable from graphene. Exfoliating UTBNSs has been challenging due to their exceptional intersheet-bonding and chemical-inertness. To develop applications of BN monolayers and evolve research, a facile lab-scale approach was desired that can produce processable dispersions of BN monolayers. We demonstrated a novel chlorosulfonic acid based treatment that resulted in protonation assisted layer-by-layer exfoliation of BN monolayers with highest reported yields till date. Further, the BN monolayers exhibited extensively protonated N centers, which are utilized for chemically interfacing GNPs, demonstrating their ability to act as excellent nano-templates. The scientific details obtained from the research shown here will significantly support current research activities and greatly impact their future applications. Our research findings have been published in ACS Nano, Small, Journal of Physical Chemistry Letters, MRS Proceedings and have gathered >45 citations.

Boron is an element, which is necessary as essential nutrient for living organisms, especially for plants where it is involved in cell wall composition. But boron excess can cause some problems on the development of plants (defoliation, decay and fall unripe fruits), of humans and animals such as nausea, diarrhoea, dermatitis, lethargy. Boron toxicity also changes blood composition, caused disorder in neurological, physical, intellectual development. Nowadays, due to the shortage of fresh water sources, seawater desalination has been becoming an alternative fresh water supply. However, the presence of boron in seawater is quite high (4.5 mg L–1, around 4.5 mM). Moreover, the increasing use of boron in industries and its discharge to the environment has led to the contamination of surface and ground waters. As the result, boron removal, in production of drinking water becomes very important. Therefore, the World health organization has recommended a guideline of 0.5 mg L–1 B in drinking water and a maximum limit of 0.3 mg L–1 B in fresh water used for irrigation. The objective of this thesis is to study the mechanisms of boron surface exchange on different materials versus time and at equilibrium depending on some physicochemical parameters such as pH, initial boron concentration, reaction time in order to find a new exchanger for boron removal. Boron removal was carried out by ion exchange process using 2 types of resins: Amberlite IRA 743, Diaion CRB 03 as boron selective resins with methylglucamine functions, and Ambersep 900-OH and Amberlite IRA 402 Cl as anionic exchange resins with ammonium functions. From batch studies, fast exchange between resin surface and liquid phase was observed with boron removal up to at least 96 % within 30 min for Amberlite IRA 743, Diaion CRB 03 and Ambersep 900- OH. The reaction between resin surface and boron solution reached equilibrium after 2 h for all the resins. The pseudo-second order kinetic model was used to well describe the sorption kinetic process of the resins. At equilibrium, the experimental results showed that the maximum adsorption was observed to be achieved at pH 8 for Ambersep 900- OH, pH 10 for Amberlite IRA 402 Cl and independent on pH range from 6 to 12 for the 2 boron selective resins Amberlite IRA 743 and Diaion CRB 03. At pH 8 and for boron concentrations < 20 mM, the Langmuir-type relationship was used to fit the experimental data for Amberlite IRA 743, Ambersep 900- OH and resin Diaion CRB 03. In the range of studied boron concentration, the boron sorption onto Amberlite IRA 402 Cl followed linear-type behaviour. At pH 8 and for boron concentrations < 20 mM, the sorption capacities are: 1, 0,7, 0,3 et 0,05 mmol g–1 for Diaion CRB 03, Amberlite IRA 743, Ambersep 900- OH and Amberlite IRA 402 Cl, respectively. Column experiments were performed with the anionic resin Ambersep 900-OH and the selective one Amberlite IRA 743 by studying both the influence of boron concentration and the residence time. For the selective resin, if the residence time decreases, the boron breakthrough is fast followed by a long tail. For larger residence time, local equilibrium seems to be assumed. Results are thus consistent with batch experimental data. For the anionic resin, the nonlinear behaviour is also confirmed. Moreover, column experiments showed a strong difference during desorption. To regenerate resins, acid and basic treatments are necessary for the selective resin although a basic solution is enough for the anionic resin. A more detailed study of mechanisms is in progress in order to build a exchange model for predicting boron fate. Finally, characterization of pectins was also performed. Its composition (sugar and boron content) and the viscosity of pectin solutions were quantified. Filtration experiments allowed testing the efficiency of such material to remove boron too

Thesis advisor: Amir H. Hoveyda / Chapter 1. A Review of Catalytic Enantioselective Allylic Substitution (EAS) with Chiral Sulfonate Containing N-heterocyclic Carbenes (NHC). A comprehensive review of enantioselective allylic substitution reactions, which are promoted by a chiral N-heterocyclic carbene metal complex that features a unique sulfonate motif, is provided in this chapter. Reactions are classified into two categories. One class of transformations is catalyzed by a series of easily modifiable sulfonate bearing NHC-Cu complexes, with which a range of nucleophilic organometallic reagents (i.e., organozinc-, aluminum-, magnesium- and boron-based) that carry different carbon-based units are readily utilized in efficient and highly selective C-C bond forming processes. Another set of reactions exclude the use of a copper salt; catalytic amount of a sulfonate containing imidazolinium salt is capable of promoting additions of alkyl Grignard, zinc and aluminum species to easily available allylic electrophiles in a site- and enantioselective fashion. The mechanistic scenarios of both catalytic systems that account for the observed experimental data are discussed in detail. Chapter 2. Cu-Catalyzed Enantioselective Allylic Substitutions with Aryl- and Heteroarylaluminum Reagents. In this chapter, the first examples of EAS reactions of aryl- and heteroaryl-substituted dialkylaluminum reagents to a wide range of trisubstituted allylic phosphates are demonstrated through a facile and selective catalysis rendered possible by an in situ generated sulfonate containing NHC-Cu complex, delivering enantiomerically enriched olefin products that bear an all carbon quaternary stereogenic center. The requisite organometallic species are easily prepared from either the corresponding aryl- and heteroaryl halides, or through efficient and site selective deprotonation at the C-2 position of furan and thiophene; such aluminum entities are readily used in situ without the requirement of purification. Application to small molecule natural product synthesis is also carried out to illustrate the utility of the present protocol. Chapter 3. Cu-Catalyzed Enantioselective Allylic Substitutions with Alkenylaluminum Reagents. This chapter focuses on our research towards construction of enantioenriched tertiary and quaternary stereogenic centers that are substituted with two further functionalizable alkenes. The first combination of the study involves the addition of stereochemically well-defined trisubstituted alkenylaluminum reagents to disubstituted allylic phosphates; the transformation commences with a silyl-directed stereoselective hydroalumination and finishes with an enantioselective Cu-catalyzed EAS promoted by a sulfonate bearing NHC. Such reactions deliver molecules that feature silicon containing trisubstituted olefin adjacent to the tertiary stereogenic center; subsequent conversion of the versatile silicon group to a proton reveals the first set of examples that incorporate pure Z alkene in Cu-catalyzed EAS. The stereoselective and concise synthesis of naturally occurring small molecule nyasol demonstrates the utility of the above method. On a different front, Ni-catalyzed site-selective hydroalumination of terminal alkynes has opened new possibility of introducing 1,1-disubstituted olefins in Cu-catalyzed EAS in the formation of tertiary stereogenic center containing enantioenriched organic building blocks. Such catalytic hydrometallation procedure also allows efficient access to alkenylaluminums that are derived from the conventionally problematic aromatic alkynes. The importance of efficient and selective synthesis of terminal aryl-substituted alkenylaluminum species is showcased in NHC-Cu-catalyzed EAS reactions that construct all-carbon quaternary stereogenic centers; a three-step convergent synthesis of natural product bakuchiol in enantiomerically enriched form highlights the potential of the current protocol in chemical synthesis. Chapter 4 Cu-Catalyzed Enantioselective Allylic Substitutions with Alkenylboronic Acid Pinacol Ester Reagents and Applications in Natural Product Synthesis. Within this chapter, we disclose the efficient utilization of alkenylboron reagents in Cu-catalyzed EAS reactions, which lead to highly site and enantioselective formations of molecules that contain both tertiary and quaternary carbon stereogenic centers. Unlike their aluminum-based counterparts, the use of boron-based reagents allows effective delivery of sensitive organic function groups, such as a carbonyl, which would be incompatible in the hydrometallation process with dibal-H. Our efforts accumulate to the first report of incorporation of all carbon quaternary centers that are substituted with unsaturated ester and aldehyde units in the EAS products; such a method facilitates the concise diastereo- and enantioselective synthesis of Pummerer's ketone and it's trans isomer. Further development of the above protocol towards the construction of tertiary stereogenic centers requires the design of new chiral sulfonate-containing imidazolinium salts as the ligand precursors and has lead to the employment of a broader range of alkenylboron species, which feature readily functionalizable motifs. Subsequent demonstrations in enantioselective synthesis of a variety of small molecule natural products showcase the utility. / Thesis (PhD) — Boston College, 2013. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

Thesis advisor: Amir H. Hoveyda / Chapter 1. The development of chiral monodentate N-heterocyclic carbenes (NHCs) is presented. Structurally varied twenty-eight new chiral imidazolinim salts, NHC precursors, were synthesized and characterized. Chapter 2. The first example of Cu-catalyzed enantioselective conjugate additions of alkyl- and arylzinc reagents to unactivated cyclic enones is presented. Transformations are promoted in the presence of 2.5-15 mol % of a readily available chiral NHC-based Cu complex, affording the desired products bearing all-carbon quaternary stereogenic centers in 67-98% yield and in up to 97% ee. Catalytic enantioselective reactions can be carried out on a benchtop, with undistilled solvent and commercially available (not further purified) Cu salts. Chapter 3. A new class of enantioselective conjugate addition (ECA) reactions that involve aryl- or alkenylsilylfluoride reagents and are catalyzed by chiral non-C2-symmetric Cu-based NHC complexes are presented. Transformations have been designed based on the principle that a catalytically active chiral NHC-Cu-aryl or NHC-Cu-alkenyl complex can be accessed from reaction of a Cu-halide precursor with in situ-generated aryl- or alkenyl-tetrafluorosilicate. Reactions proceed in the presence of 1.5 equivalents of the aryl- or alkenylsilane reagents and 1.5 equivalents of tris(dimethylamino)sulfonium difluorotrimethylsilicate. Desired products are isolated in 63-97% yield and 73.5:26.5-98.5:1.5 enantiomeric ratio (47%-97% ee). Chapter 4. An efficient Cu-catalyzed protocol for enantioselective addition of a dimethylphenylsilanyl group to a wide range of cyclic and acyclic unsaturated ketones, esters, acrylonitriles and dienones is presented. Reactions are performed in the presence of 1-5 mol % of commercially available and inexpensive CuCl, a readily accessible monodentate imidazolinium salt as well as commercially available (dimethylphenylsilyl)pinacolatoboron. Cu-catalyzed 1,4- and 1,6-conjugate additions afford the enantiomerically enriched silanes in 72%-98% yield and 90:10->99:1 enantiomeric ratio (er) with up to >25:1 of Z:E selectivity. Chapter 5. A Cu-catalyzed method for enantioselective boronate conjugate additions to trisubstituted alkenes of acyclic a,b-unsaturated carboxylic esters, ketones, and thioesters is presented. All transformations are promoted by 5 mol % of a chiral monodentate NHC-Cu complex, derived from a readily available C1-symmetric imidazolinium salt, and in the presence of commercially available bis(pinacolato)diboron. Reactions are efficient (typically, 60% to >98% yield after purification) and deliver the desired boryl carbonyls in up to >98:2 enantiomer ratio (er). In addition, metal-free, nucleophilic activation of a B-B bond has been exploited in the development of a highly efficient method for conjugate additions of commercially available bis(pinacolato)diboron to cyclic or acyclic a,b-unsaturated carbonyls. Reactions are readily catalyzed by 2.5-10 mol % of a simple NHC. A variety of cyclic and acyclic unsaturated ketones and esters can serve as substrates. Transformations deliver boryl carbonyls bearing tertiary as well as quaternary B-substituted carbons in up to >98% yield. / Thesis (PhD) — Boston College, 2010. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

Thesis advisor: Marc L. Snapper / Chapter 1. A Practical Synthesis of 3-Acyl Cyclobutanones by [2 + 2] Annulation. Mechanism and Utility of the Zn(II)-Catalyzed Condensation of alpha-Chloroenamines with Electron-Deficient Alkenes. We have developed a catalytic method for the synthesis of highly functionalized 3-acyl cyclobutanones which are useful building blocks for a variety of natural products. Methods for cyclobutanone synthesis have traditionally been limited to Lewis-acid promoted rearrangement of oxaspiropentanes or cyclizations of ketene and syntheses involving keteneiminium salts have required stoichiometric quantities of a Lewis acid. Furthermore, the mechanism for these types of cyclizations remains unknown. This portion of my research focused on an efficient, catalytic method for the synthesis of 3- acyl cyclobutanones and providing insight into the mechanism for cycloaddition. Chapter 2. Enantioselective Synthesis of Boron-Substituted Quaternary Carbons by NHC-Cu-Catalyzed Boronate Conjugate Additions to Unsaturated Carboxylic Esters, Ketones, or Thioesters. We have developed an enantioselective NHC-Cu-catalyzed conjugate addition of boronate esters to acyclic, trisubstituted alpha, beta-unsaturated carbonyl compounds. Enantioselective conjugate addition of a boronic acid pinacol ester through the use of bis(pinacolato)diboron [B2(pin)2,] to alpha, beta-unsaturated aliphatic and aryl esters promoted by 5 mol % of an NHC-Cu catalyst afforded tertiary beta-boryl carbonyls in high efficiency and enantioselectivity. Trisubstituted alpha, beta-unsaturated esters and thioesters were found to be reactive substrates in the presence of a stoichiometric quantity of methanol. Chapter 3. Metal-Free Catalytic C-Si Bond Formation in an Aqueous Medium and C-B Bond Formation in a Protic Medium. Enantioselective NHC-Catalyzed Silyl and Boryl Conjugate Additions to Cyclic and Acyclic alpha, beta-Unsaturated carbonyls. We have developed a method for enantioselective metal-free silyl conjugate additions through the use of dimethylphenylsilyl) boronic acid pinacol ester [PhMe2SiB(pin)] catalyzed by chiral N-heterocyclic carbenes (NHCs) in basic aqueous thf. Optimization of metal-free conditions demonstrated that the presence of water was required for high efficiency. alpha, beta-Unsaturated cyclic ketones and lactones were examined as substrates, and acyclic ketones, esters and aldehydes were also competent substrates for silyl conjugate addition. beta-Silyl carbonyls were isolated in up to >98% yield and >98:2 er. Chapter 4. Elucidation of Mechanism for Enantioselective NHC-Catalyzed Silyl Conjugate Addition. We propose a catalytic cycle for NHC-catalyzed enantioselective silyl conjugate addition. Mechanistic studies of NHC-catalyzed enantioselective silyl conjugate additions are presented. Optimization of conditions for an inefficient alpha, beta-unsaturated electron-deficient ketone provided insight into the roles for dbu and water. Kinetic data indicate that conjugate addition is first order in PhMe2SiB(pin) and carbene, and DFT calculations support the formation of an NHC-silyl anion as a reactive intermediate in the catalytic cycle. / Thesis (PhD) — Boston College, 2012. / Discipline: Chemistry.

Thesis advisor: Amir H. Hoveyda / Chapter 1. Ligand-Controlled Site-Selective NHC–Cu-Catalyzed Protoboration of Monosubstituted Allenes. Site-selective proto–boryl additions to monosubstituted allenes promoted by NHC–Cu complexes are disclosed. Synthetically useful 1,1-disubstituted and Z-trisubstituted alkenylboron compounds are afforded in high efficiency (71%–92% yield) and site selectivity (88% to >98%) through proper choice of NHC ligands. Mechanistic study with the assistance of DFT calculations indicates that protonation of 2-boron-substituted allylcopper complex occurs through six-membered cyclic transition state. The utility of this protocol is demonstrated through application to fragment synthesis of an antibiotic macrolide natural product elansolid A. Chapter 2. Cu-Catalyzed Chemoselective Copper–Boron Additions to Monosubstituted Allenes Followed by Allyl Additions to Carbonyl Compounds. The first examples of catalytic generation of 2-boron-substituted allylcopper species and their in situ use for C–C bond formation are described. The reactions are performed in the presence of bisphosphine– or NHC–Cu complexes at 22 oC. High-value alcohol-containing alkenylboron compounds are provided in high efficiency (68–92% yield after oxidation) and stereoselectivity (88:12 to >98:2 dr). The reactions proceed with exclusive γ-addition mode through a cyclic six-membered transition state. Enantioselectivity can be achieved with chiral bisphosphine ligands in up to 97:3 enantiomeric ratio. Chapter 3. Chemo-, Site- and Enantioselective Copper–Boron Additions to 1,3-Enynes Followed by Site- and Diastereoselective Additions of the Resulting Allenylcopper Complexes to Aldehydes. Catalytic enantioselective multicomponent reactions involving 1,3-enynes, aldehydes and B2(pin)2 are described. The resulting products contain a primary C–B(pin) bond, as well as alkyne- and hydroxyl-substituted tertiary stereogenic centers. A critical feature is high enantioselectivity of the initial Cu–B addition to an alkyne-substituted terminal alkene. The key mechanistic issues are investigated by DFT calculations. Reactions are promoted in the presence of the Cu complex of an enantiomerically pure C1-symmetric bisphosphine and are complete in 8 h at ambient temperature. Products are generated in 66–94% yield (after oxidation or catalytic cross-coupling), 90:10 to >98:2 diastereomeric ratio, and 85:15–99:1 enantiomeric ratio. Aryl-, heteroaryl-, alkenyl-, and alkyl-substituted aldehydes and enynes are suitable substrates. Utility is demonstrated through catalytic alkylation and arylation of the organoboron compounds as well as applications to synthesis of fragments of tylonolide and mycinolide IV. Chapter 4. Multifunctional Alkenylboron Compounds through Single-Catalyst-Controlled Multicomponent Reactions and Their Applications in Scalable Natural Product Synthesis. A facile multicomponent catalytic process that begins with a chemo-, site- and diastereoselective copper–boron addition to a monosubstituted allene followed by addition of the resulting boron-substituted organocopper intermediate to an allylic phosphate, generating products that contain a stereogenic center, a monosubstituted alkene and an easily functionalizable Z-trisubstituted alkenylboron group in up to 89% yield with >98% branch selectivity and stereoselectivity and an enantiomeric ratio greater than 99:1. The copper-based catalyst is derived from a robust heterocyclic salt that can be prepared in multigram quantities from inexpensive starting materials and without costly column chromatography purification. The utility of the method is demonstrated through enantioselective synthesis of gram quantities of two natural products, rottnestol and herboxidiene/GEX1A. Chapter 5. Cu-Catalyzed Enantioselective Allyl and Propargyl 1,6-Conjugate Additions through 3,3’-Reductive Elimination. Catalytic enantioselective 1,6-conjugate additions of allyl-type nucleophiles promoted by NHC–Cu complexes are reported. Propargyl and 2-boron allyl 1,6-conjugate products are formed in high efficiency, diastereo- and enantioselectivity. The unique mechanistic feature is that the transformations proceed through Cu-catalyzed 3,3’-reductive elimination, that is unprecedented for copper catalysis. Further mechanistic study and application to complex molecule synthesis will be conducted. / Thesis (PhD) — Boston College, 2015. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.