Yes / Reverse Osmosis (RO) process has become one of the most widely utilised technologies for brackish water desalination for its capabilities of producing high-quality water. This paper emphasis on investigating the feasibility of implementing the retentate recycle design on the original design of an industrial medium-sized multistage and multi-pass spiral wound brackish water RO desalination plant (1200 m³/day) of Arab Potash Company (APC) located in Jordan. Specifically, this research explores the impact of recycling the high salinity stream of the 1st pass (at different recycled percentages) to the feed stream on the process performance indicators include, the fresh water salinity, overall recovery rate, and specific energy consumption. The simulation is carried out using an earlier model developed by the same authors for the specified RO plant using gPROMS suits. This confirmed the possibility of increasing the product capacity by around 3% with 100% recycle percentage of the high salinity retentate stream.

Yes / The implementation of Reverse Osmosis (RO) technology is noticeably increased to produce freshwater from brackish and seawater resources. In this work, performance analysis of a multistage multi pass medium-sized spiral wound brackish water RO (BWRO) desalination plant (1200 m³/day) of Arab Potash Company (APC) located in Jordan is evaluated using modelling and simulation. For this purpose, a mathematical model for the spiral wound RO process based on the principles of solution diffusion model is developed. The model is then used to simulate the operating conditions of low-salinity brackish water RO (BWRO) desalination plant. The results obtained are then compared against the real industrial data of BWRO desalination plant of APC which shows a high-level of consistency. Finally, the model is used to analysis the impact of the operating parameters such as salinity, pressure, temperature, and flow rate on the plant performance. The sensitivity analysis confirms that both feed flow rate and operating pressure as the critical parameters that positively affect the product salinity.

Yes / The Reverse Osmosis (RO) input parameters have key roles in mass transport and performance indicators. Several studies can be found in open literature. However, an experimental research on evaluating the brackish water RO input parameters influence on the performance metrics with justifying the interference between them via a robust model has not been addressed yet. This paper aims to design, construct, and experimentally evaluate the performance of a 50 m3/d RO pilot-plant to desalinate brackish water in Shahid Chamran University of Ahvaz, Iran. Water samples with various salinity ranging from 1000 to 5000 ppm were fed to a semi-permeable membrane under variable operating pressures from 5 to 13 bar. By evaluating permeate flux and brine flowrate, permeate and brine salinities, membrane water recovery, and salt rejection, some logical relations were derived. The results indicated that the performance of an RO unit is largely dependent on feed pressure and feed salinity. At a fixed feed concentration, an almost linear relationship was found to relate feed pressure and both permeate and brine flowrates. Statistically, it was found that 13 bar feed pressure results in a maximum salt rejection of 98.8% at a minimum permeate concentration of 12 ppm. Moreover, 73.3% reduction in permeate salinity and 30.8% increase in brine salinity are reported when feed pressure increases from 5 to 13 bar. Finally, it is concluded that the water transport coefficient is a function of feed pressure, salinity, and temperature, which is experimentally estimated to be 2.8552 L/(m2 h bar).

Yes / Brackish water can be considered an important source of fresh water, via desalination, especially for arid districts. Reverse Osmosis (RO) process has been successfully used to produce fresh water from brackish water sources. However, there is still the challenge of improving the performance of multistage RO desalination plants. From the selection of the RO configurations to the selection of the appropriate type of membranes and the operating conditions at the end determines the performance of RO process in terms of recovery, salt rejection, energy consumptions and ultimately the cost of production of freshwater. Using model-based simulation, this work attempts to investigate the most suitable types of membranes for an industrial scale RO plant from a set of different membrane brands that would attain the highest-performance at lowest specific energy consumption (SEC). As a case study, we considered a multistage multi-pass medium-scale RO plant (1200 m3/day) of Arab Potash Company (APC, Jordan) which produces high quality water for the boilers after pre-treatment stage. The simulation results confirmed that employment of the Filmtec BW30LE-440 would increase water recovery by about 22% besides reducing the product salinity and SEC by about 15% and 10%, respectively compared to the existing membrane.

The Reverse Osmosis (RO) process has been considered to be one of the most widely utilised techniques for brackish water desalination for its capabilities to produce high-quality water. The RO process characterised by its low energy consumption compared to thermal distillation processes, leading to reduced overall water production cost. To systematically understand the transport phenomena of solvent and solutes via the membrane texture, several mathematical models were developed. This interestingly aids to conduct a huge amount of simulation and optimisation studies to judge the influence of control variables on the performance indexes and to adjust the key variables at optimum values to realise optimum production indexes. In this research, a specific accurate model for a single spiral wound RO process has been successfully developed and used to build accurate models for the multistage brackish water RO desalination process of two different designs. The robustness of the model developed was confirmed via validation against the experimental data collected from simple design of RO system and complicated design of RO system of Arab Potash Company (APC). This is followed by a thorough simulation of the RO process to explore the influence of operating conditions on the process performance indicators. Recently, several contributions were made in this thesis that specifically comprises the improvement of the original design of brackish water RO desalination process. The influence of a retentate recycle design is investigated on the process performance. Moreover, evaluation and minimisation of specific energy consumption (expressed in kWh/m3 of freshwater production) is carried out on the simple and complicated designs of RO process by implementing an energy recovery device. Also, the most suitable brand of membranes was explored for the RO system from a set of different brands of membrane to attain the highest-performance rejection at lowest energy consumption compared to the original membrane. Furthermore, a single optimisation framework was developed to mitigate the specific energy consumption of simple and complicated designs of brackish water RO desalination process. Finally, a thermodynamic limitations and exergy analysis of the complicated design of RO system are outlined via a thoroughly study to investigate the locations of high exergy destruction. These contributions were verified as they promoted the separation performance at a significant energy saving. / Mutah University, Jordan

This report examines water supply planning issues in San Antonio, Texas. San Antonio is unique among large cities in the United States in that it relies almost exclusively on a single source, the Edwards Aquifer, for its water supply. Because San Antonio’s water demand is projected to outgrow the Aquifer’s capacity, the city must consider other options to extend and augment its current water supply. After describing the hydrogeology and water supply history of San Antonio, this report explains the multitiered water planning structure and current and future water needs for the city. It then studies and evaluates three short-to-mid term water supply options. By continuing to develop its already successful water conservation programs and water reclamation system, San Antonio can delay the need for more costly and environmentally impactful water supply options down the road, and wisely manage the resources it already draws from. / text