The theoretical stress-strain behaviour of individual fibre reinforced cement composites is reviewed. Based on the multiple cracking concept of the existing theory, analytical expressions are developed to describe the tensile stress-strain behaviour of a fibre-cement hybrid composite consisting of three components, i.e. two reinforcing fibres with different moduli, strengths and strains to failure and a common cement binder. The model predicts that the tensile stress-strain curve of the hybrid composites consists of five stages, instead of three stages of the existing models for individual fibre cements, and relates the tensile behaviour of each stage to the component properties of the components and the test system parameters. A description is given of the physical and mechanical properties of four types of reinforcing fibres used in the study. These were fibrillated polypropylene film, alkali-resistant glass, polyvinyl alcohol fibres and carbon fibres. A small number of direct tensile tests on continuous glass, carbon and polyvinyl alcohol were performed. The tensile stress-strain behaviour of four types of fibre-cement hybrid composites was studied with particular emphasis on that of the glass- polypropylene hybrids for which the flexural load-deflection behaviour was also examined. It is shown that the fibre-cement hybrid composites yield superior engineering properties over their parent composites and the improvements are sensitive to volume fractions of each of the two fibres. The measured tensile stress-strain curves of the hybrids were compared with the theoretical predictions and satisfactory agreement in general is obtained. Implications from the present work for the design of fibre-cement hybrid composites are assessed.

The finite element method has employed to simulate the laser thermal cracking process for brittle materials. The varieties of temperature and thermal stress distributions around the crack tip were studied. The effect of cracking parameters, i.e. laser power, focus moving speed, plate thickness, crack length, cooling effect¡K etc., on the crack propagation has also investigated. The stress intensity factor around crack tip is considered as the key parameter to dominate the crack propagation. The thermal-plastic-elastic finite element model was employed to simulate the temperature and stress distributions. The strain energy release rate and stress intensity factor solved from virtual crack closure technique and displacement extrapolation method are employed to illustrate the crack state in this study. Five crack length models were used to show the stress intensity factor variations around the crack tip. Numerical results indicate that the head flux on the surface, substrate thickness and adopting cooling sources may affect the crack propagation, crack delay significantly. The results in this study also demonstrate the feasibility of employing finite element method in the exploring crack propagation mechanism in laser thermal cracking process.

Contact fatigue damages resulting either from static or dynamic contact are of interest for understanding the failure modes and mechanisms leading to improvement of the components’ performances in tribological applications. The objective of this research was to ascertain how and to what extent the counterface materials, loading conditions, contact configuration, lubrication, and the environment affect the failure behaviours of material under static and dynamic contact fatigue loading. An experimental ball-on-flat test configuration was employed for both static and dynamic contact fatigue testing. In house designed test rig was used to study static cyclic loading contact fatigue behaviours of brittle polymethylmethacrylate (PMMA) in contact with balls made of different materials, i.e. Si3N4, steel, aluminium, bronze and PMMA in dry and oil-lubricated conditions. A modified four ball test machine was used to study dynamic rolling contact fatigue behaviours of thermally sprayed molybdenum and titanium coatings in contact with steel balls in dry and seawater conditions. The static contact fatigue and the dynamic contact fatigue test results revealed that counterface material, loading magnitude, lubricant and the environment play a vital role in controlling failure modes and the extent of damage. In static contact fatigue, adhesive strength of the interface was the key factor controlling damage of the PMMA plate in both dry and oil-lubricated conditions. In dry conditions, three failure modes, i.e. adhesive wear, ring cracks, and radial cracks controlled the damage of PMMA to a different degree for each combination of materials. Whereas, the damage of each combination in oil-lubricated conditions was affected by the extent of three failure modes, i.e. adhesive wear, radial cracks and abrasive wear. In dynamic contact fatigue tests, adhesive wear and inter-lamellar cracking were the major failure modes controlling damage of molybdenum coating and titanium coating in dry contact conditions while abrasive wear, corrosion and lubrication controlled damage processes in seawater conditions.

No trabalho estuda-se o crescimento de trincas em carga monotônica e cíclica nos casos de materiais quase-frágeis, introduzindo uma lei de dano cíclico. Revisam-se conceitos sobre modelos coesivos, leis de carga-descarga, leis de evolução de dano e efeito de escala. É seguido o modelo coesivo irreversível proposto por Wang e Siegmund (2006). Em particular se dá ênfase aos efeitos de escala não estatísticos. O modelo de zona coesiva irreversível apresenta uma formulação de dano e considera carregamento em fadiga. Quando o tamanho estrutural é reduzido (ou as trinca se extendem), a fratura por fadiga não mais ocorre por propagação de trinca, mas sim por uma decoesão uniforme. O objetivo desde trabalho é implementar este modelo e verificar sua potencialidade na captura de efeitos de escala, comparando com experimentos e dados disponíveis na literatura. / At present work is intended to study crack growth in cyclic and monotonic loading in the case of quasi-brittle materials, introducing a damage mechanism, is reviewed concepts of cohesive models, loading-unloading laws, damage evolution laws and effect of scale. The irreversible cohesive zone model proposed by Wang e Siegmund (2006) is followed. In particular emphasizes in the not statistical size effects. The irreversible cohesive zone model, presents a damage formulation and considers fatigue loading. It is demonstrated in this study that, when the structure size is reduced (or extend cracks), the fatigue fracture no longer occurs by crack propagation, then occurs by uniform decohesion . The objetive of this work is implementing this model and verify its capability to capture the scale effect compared with experiments and data available in literature.

No trabalho estuda-se o crescimento de trincas em carga monotônica e cíclica nos casos de materiais quase-frágeis, introduzindo uma lei de dano cíclico. Revisam-se conceitos sobre modelos coesivos, leis de carga-descarga, leis de evolução de dano e efeito de escala. É seguido o modelo coesivo irreversível proposto por Wang e Siegmund (2006). Em particular se dá ênfase aos efeitos de escala não estatísticos. O modelo de zona coesiva irreversível apresenta uma formulação de dano e considera carregamento em fadiga. Quando o tamanho estrutural é reduzido (ou as trinca se extendem), a fratura por fadiga não mais ocorre por propagação de trinca, mas sim por uma decoesão uniforme. O objetivo desde trabalho é implementar este modelo e verificar sua potencialidade na captura de efeitos de escala, comparando com experimentos e dados disponíveis na literatura. / At present work is intended to study crack growth in cyclic and monotonic loading in the case of quasi-brittle materials, introducing a damage mechanism, is reviewed concepts of cohesive models, loading-unloading laws, damage evolution laws and effect of scale. The irreversible cohesive zone model proposed by Wang e Siegmund (2006) is followed. In particular emphasizes in the not statistical size effects. The irreversible cohesive zone model, presents a damage formulation and considers fatigue loading. It is demonstrated in this study that, when the structure size is reduced (or extend cracks), the fatigue fracture no longer occurs by crack propagation, then occurs by uniform decohesion . The objetive of this work is implementing this model and verify its capability to capture the scale effect compared with experiments and data available in literature.

No trabalho estuda-se o crescimento de trincas em carga monotônica e cíclica nos casos de materiais quase-frágeis, introduzindo uma lei de dano cíclico. Revisam-se conceitos sobre modelos coesivos, leis de carga-descarga, leis de evolução de dano e efeito de escala. É seguido o modelo coesivo irreversível proposto por Wang e Siegmund (2006). Em particular se dá ênfase aos efeitos de escala não estatísticos. O modelo de zona coesiva irreversível apresenta uma formulação de dano e considera carregamento em fadiga. Quando o tamanho estrutural é reduzido (ou as trinca se extendem), a fratura por fadiga não mais ocorre por propagação de trinca, mas sim por uma decoesão uniforme. O objetivo desde trabalho é implementar este modelo e verificar sua potencialidade na captura de efeitos de escala, comparando com experimentos e dados disponíveis na literatura. / At present work is intended to study crack growth in cyclic and monotonic loading in the case of quasi-brittle materials, introducing a damage mechanism, is reviewed concepts of cohesive models, loading-unloading laws, damage evolution laws and effect of scale. The irreversible cohesive zone model proposed by Wang e Siegmund (2006) is followed. In particular emphasizes in the not statistical size effects. The irreversible cohesive zone model, presents a damage formulation and considers fatigue loading. It is demonstrated in this study that, when the structure size is reduced (or extend cracks), the fatigue fracture no longer occurs by crack propagation, then occurs by uniform decohesion . The objetive of this work is implementing this model and verify its capability to capture the scale effect compared with experiments and data available in literature.

No description available.

A formação e propagação de fissuras é um fenômeno observado em diversos materiais utilizados na engenharia, como concreto, metais, cerâmicas e rochas. Tendo em vista a grande influência que fissuras têm no comportamento global da estrutura o objetivo deste trabalho consiste na implementação de um modelo de fissura com descontinuidades fortes incorporadas a fim de analisar o processo de fratura em materiais quase-frágeis. A descontinuidade no campo de deslocamentos (descontinuidade forte) é representada através da introdução de graus de liberdade adicionais no interior do elemento finito, sendo esta abordagem denominada enriquecimento elementar (E-FEM). Nestes modelos a fissura pode se propagar em qualquer direção dentro do elemento finito, evitando a necessidade de redefinição da malha em cada etapa, além de fornecer resultados relativamente independentes da malha de elementos finitos utilizada. Por serem internos a cada elemento finito, os graus de liberdade adicionais podem ser eliminados da solução global por condensação estática. Desta forma as descontinuidades são definidas em nível de elemento e o modelo pode ser facilmente implementado em códigos computacionais existentes. O modelo implementado foi proposto por Dvorkin, Cuitiño e Gioia (1990), o qual pertence à classe de modelos com formulação assimétrica estaticamente e cinematicamente consistente (SKON). Esta formulação é caracterizada por garantir o movimento de corpo rígido entre as partes do elemento além de assegurar a continuidade de tensões na linha de fissura, resultando numa matriz de rigidez assimétrica. Diferentes relações constitutivas podem ser utilizadas para descrever o comportamento das regiões com e sem fissura. Portanto, para a região não fissurada, utilizouse um modelo constitutivo elástico linear e para a região fissurada foi analisada a performance de dois modelos constitutivos distintos: linear e exponencial. A capacidade de representar o comportamento de elementos estruturais fissurados foi ilustrada através de exemplos de tração e flexão comparados com outros modelos de fissura existentes e com resultados experimentais. Em relação aos modelos constitutivos para a linha da fissura, o modelo linear não se mostrou adequado por superestimar as tensões de pico além de apresentar um ramo de amolecimento mais frágil. Já o modelo exponencial mostrou-se bastante eficiente representando de forma correta o comportamento de materiais quase-frágeis. / The formation and propagation of cracks is a phenomenon observed in many materials used in engineering, such as concrete, metals, ceramics and rocks. In view of the influence of cracks in the global behavior of the structure, the aim of this work is the implementation of an embedded strong discontinuity model in order to analyze the fracture process in quasi-brittle materials. The discontinuity in the displacement field (strong discontinuity) is represented by the introduction of additional degrees of freedom within the finite element. This approach is called elemental enrichment (E-FEM). The embedded models allow the propagation of crack in any direction within the finite element, avoiding the need of remeshing and providing objective results (mesh independent). The additional degrees of freedom are introduced into the finite element, then these degrees can be eliminated from the global solution by static condensation and the model can be easily implemented in existent computational codes. The model used here was proposed by Dvorkin, Cuitiño and Gioia (1990), which belongs to the statically and kinematically optimal non-symmetric (SKON) formulation. In this formulation, the kinematics that allows for relative rigid body motion and the enforcement of the traction continuity are introduced at element level, resulting a non-symmetric formulation. Different constitutive relations can be used to describe the behavior of the zones with and without cracks. For the zone without cracks it was used a linear elastic model and for the cracked zone it was analyzed the behavior of two different constitutive models: linear and exponential. The ability of the model to represent the behavior of cracked structural elements was illustrated by bending and tensile tests and the results were compared with numerical and experimental data. Regarding the constitutive models for the fracture zone, it was concluded that the linear model was not suitable because it overestimated the maximum stress and promoted a britller softening. In contrast, the exponential model proved to be very efficient to represent the behavior of quasi-brittle materials.

The thesis presents the development and validation of novel computational technology for modelling and analysis of damage and failure in quasi-brittle materials. The technology is demonstrated mostly on concrete, which is the most widely used quasi-brittle material exhibiting non-linear behaviour. Original algorithms and procedures for generating two-dimensional (2D) and three-dimensional (3D) heterogeneous material samples are developed, in which the mesoscale features of concrete, such as shape, size, volume fraction and spatial distribution of inclusions and pores/voids are randomised. Firstly, zero-thickness cohesive interface elements with softening traction-separation relations are pre-inserted within solid element meshes to simulate complex crack initiation and propagation. Monte Carlo simulations (MCS) of 2D and 3D uniaxial tension tests are carried out to investigate the effects of key mesoscale features on the fracture patterns and load-carrying capacities. Size effect in 2D concrete is then investigated by finite element analyses of meso-structural models of specimens with increasing sizes. Secondly, a 3D meso-structural damage-plasticity model for damage and failure analysis of concrete is developed and applied in tension and compression. A new scheme for identifying interfacial transition zones (ITZs) in concrete is presented, whereby ITZs are modelled by very thin layers of solid finite elements with damage-plasticity constitutive relations. Finally, a new coupled method named non-matching scaled boundary finite element-finite element coupled method is proposed to simulate crack propagation problems based on the linear elastic fracture mechanics. It combines the advantage of the scaled boundary finite element method in modelling crack propagation and also preserves the flexibility of the finite element method in re-meshing. The efficiency and effectiveness of the developed computational technology is demonstrated by simulations of crack initiation and propagation problems.

A formação e propagação de fissuras é um fenômeno observado em diversos materiais utilizados na engenharia, como concreto, metais, cerâmicas e rochas. Tendo em vista a grande influência que fissuras têm no comportamento global da estrutura o objetivo deste trabalho consiste na implementação de um modelo de fissura com descontinuidades fortes incorporadas a fim de analisar o processo de fratura em materiais quase-frágeis. A descontinuidade no campo de deslocamentos (descontinuidade forte) é representada através da introdução de graus de liberdade adicionais no interior do elemento finito, sendo esta abordagem denominada enriquecimento elementar (E-FEM). Nestes modelos a fissura pode se propagar em qualquer direção dentro do elemento finito, evitando a necessidade de redefinição da malha em cada etapa, além de fornecer resultados relativamente independentes da malha de elementos finitos utilizada. Por serem internos a cada elemento finito, os graus de liberdade adicionais podem ser eliminados da solução global por condensação estática. Desta forma as descontinuidades são definidas em nível de elemento e o modelo pode ser facilmente implementado em códigos computacionais existentes. O modelo implementado foi proposto por Dvorkin, Cuitiño e Gioia (1990), o qual pertence à classe de modelos com formulação assimétrica estaticamente e cinematicamente consistente (SKON). Esta formulação é caracterizada por garantir o movimento de corpo rígido entre as partes do elemento além de assegurar a continuidade de tensões na linha de fissura, resultando numa matriz de rigidez assimétrica. Diferentes relações constitutivas podem ser utilizadas para descrever o comportamento das regiões com e sem fissura. Portanto, para a região não fissurada, utilizouse um modelo constitutivo elástico linear e para a região fissurada foi analisada a performance de dois modelos constitutivos distintos: linear e exponencial. A capacidade de representar o comportamento de elementos estruturais fissurados foi ilustrada através de exemplos de tração e flexão comparados com outros modelos de fissura existentes e com resultados experimentais. Em relação aos modelos constitutivos para a linha da fissura, o modelo linear não se mostrou adequado por superestimar as tensões de pico além de apresentar um ramo de amolecimento mais frágil. Já o modelo exponencial mostrou-se bastante eficiente representando de forma correta o comportamento de materiais quase-frágeis. / The formation and propagation of cracks is a phenomenon observed in many materials used in engineering, such as concrete, metals, ceramics and rocks. In view of the influence of cracks in the global behavior of the structure, the aim of this work is the implementation of an embedded strong discontinuity model in order to analyze the fracture process in quasi-brittle materials. The discontinuity in the displacement field (strong discontinuity) is represented by the introduction of additional degrees of freedom within the finite element. This approach is called elemental enrichment (E-FEM). The embedded models allow the propagation of crack in any direction within the finite element, avoiding the need of remeshing and providing objective results (mesh independent). The additional degrees of freedom are introduced into the finite element, then these degrees can be eliminated from the global solution by static condensation and the model can be easily implemented in existent computational codes. The model used here was proposed by Dvorkin, Cuitiño and Gioia (1990), which belongs to the statically and kinematically optimal non-symmetric (SKON) formulation. In this formulation, the kinematics that allows for relative rigid body motion and the enforcement of the traction continuity are introduced at element level, resulting a non-symmetric formulation. Different constitutive relations can be used to describe the behavior of the zones with and without cracks. For the zone without cracks it was used a linear elastic model and for the cracked zone it was analyzed the behavior of two different constitutive models: linear and exponential. The ability of the model to represent the behavior of cracked structural elements was illustrated by bending and tensile tests and the results were compared with numerical and experimental data. Regarding the constitutive models for the fracture zone, it was concluded that the linear model was not suitable because it overestimated the maximum stress and promoted a britller softening. In contrast, the exponential model proved to be very efficient to represent the behavior of quasi-brittle materials.