Theme of diploma thesis is a Heavy wooden frame in apartment development. The thesis is concerned with a proposal of residential building project, which has the possibility of accommodation for people in rural areas near larger city. This is a residential building with 3 storeys. The first floor is completely wheelchair friendly and there is a flat for the disabled (1+kc). In the first and second floor is placed 7 flats (3x 1+kc, 2x 2+kc, 2x 3+kc). On the third floor there are two flats (4+kc) with entry to the terrace. Building is placed on the base zone and footing. The structural system is consists of a heavy wooden frame. The ceiling structure consists of wood joists anchored into girder frame. In the building there is a flat walkable roof in place of terrace of the apartment on the third floor, otherwise is roof construction consisting of slanting roof with wooden roof truss.

The thesis consists of a theoretical and a practical part. In the theoretical part I define characteristics of the project, parts of the project and project life cycle phase. I also describe developers their activities and types of the development projects. I focus on the possibilites of financing these project and risk. In the practical part U present development project its individual parts and finally describe the risk project. The work also contains an analysis of the development logistics market in the Czech Republic focused mainl on the last three years.

La presente tesis de investigación tiene un enfoque cualitativo que resuelve el problema de las empresas consultoras, que no establecen un Plan de Gestión de Calidad (P.G.C.) en diseño y dificultan la ejecución de un Proyecto de Edificación. Por lo cual se trazó el objetivo de elaborar un Plan de Gestión de Calidad en diseño de Proyectos de edificación, con el fin de optimizar el control de los procesos de diseño y de su documentación resultante. Para ello se utilizó la metodología de diseño no experimental, de tipo exploratorio y descriptivo-correlacional. Donde la observación, inspección y registro de cualidades cualitativas en los procesos de diseño y su documentación; fueron analizadas. Obteniéndose los siguientes resultados: El control de procesos de diseño y su documentación, optimiza el diseño del proyecto, y es necesaria para la aprobación del proyecto. El cumplimiento de los requisitos del PGC asegura la validación del diseño del proyecto. This thesis is a qualitative research approach that solves the problem of consulting firms, not establish a Quality Management Plan in design and difficult to execution of a building project. Therefore the objective of developing a Quality Management Plan in projects design of building, in order to optimize process control and its design resulting documentation. For this purpose we used the non-experimental design methodology, type exploratory and descriptive-correlational. Where observation, inspection and registration of qualitative attributes in the design process and its documentation; were analyzed. Then the following results were obtained: Process control and documentation design, optimizes the design of the project, and is necessary for the approval and validation of the project. Compliance with the requirements of Q.M.P ensures the validation of the project design.

The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.

The purpose of the final thesis is to elaborate selected parts of a technology building project of the Pension for the elderly. The complex includes eleven building objects and the main one is developed in detail. The final thesis includes a technical report about the technology building project, a building schedule, suggestion for realization of the main stages of its construction, a design of mechanical assembly. The final thesis also includes the project of site equipment, technological regulations , an inspection and test plan, an occupational safety and health plan.