No description available.

Harmonics are created by non-linear devices connected to the power system. Power system harmonics are multiples of the fundamental power system frequency and these harmonic frequencies can create distorted voltages and currents. Distortion of voltages and currents can affect the power system adversely causing power quality problems. Therefore, estimation of harmonics is of high importance for efficiency of the power system network. The problem of harmonic loss evaluation is of growing importance for renewable power system industry by impacting the operating costs and the useful life of the system components. Non-linear devices such as power electronics converters can inject harmonics alternating currents (AC) in the electrical power system. The number of sensitive loads that require ideal sinusoidal supply voltage for their proper operation has been increasing. To maintain the quality limits proposed by standards to protect the sensitive loads, it is necessary to include some form of filtering device to the power system. Harmonics also increases overall reactive power demanded by equivalent load. Filters have been devised to achieve an optimal control strategy for harmonic alleviation problems. To achieve an acceptable distortion, increase the power quality and to reduce the harmonics hence several three phase filter banks are used and connected in parallel. In this thesis, high order harmonics cases have been suppressed by employing variants of Butterworth, Chebyshev and Cauer filters. MATLAB/SIMULINK wind farm model was used to generate and analyze the different harmonics magnitude and frequency. High voltage direct current (HVDC) lines for an electrical grid that is more than50km far away wind farm generation plant was investigated for harmonics. These HVDC lines are also used in offshore wind farm plant. Investigated three-phase harmonics filters are shunt elements that are used in power systems for decreasing voltage distortion and for correcting the power factor. Renewable energy sources are not the stable source of energy generation like wind, solar and tidal e.t.c. Though they are secondary sources of generation and hard to connect with electrical grid. In near future the technique is to use the wave digital filter (WDF) or circulator-tree wave digital filter (CTWDF) for the renewable energy application can be employed to mitigate the harmonics. These WDF and CTWDF can b eused in HVDC lines and smart grid applications. A preliminary analysis is conducted for such a study.

This Master`s thesis is focused on through acquaintance of principles of the function circuits with switched capaticors and posibility of their application mainly in frequency filters or signal generators. The origin of the switched capacitor circuits is mentioned at the beginning of the work. There are references to the first scientific work and scientists who have dealt with this issue. Maxwell`s idea: lossy element (resistor) replace with lossless element (switched capacitor) in electric circuit, is further described. In the next chapter of this work are listed types of switching capacitors and their use in simple RC filters and in structures of inverted or noninverted integrators and their application in more complex higher order filters. The advantages and disadvantages of SC circuits versus circuit composed of discrete components are shown. It is also listed a simple low-pass switched RC filter implemented with analogue multiplexer 4053. Using the LTC1043 integrated circuit, which structure and properties are described and analyzed in detail in the work, the 1st order aktive or pasive low and high pass filters were designed and subsequently simulated in the computer simulator OrCAD PSpice v.10. Another chapter deals with the integrated circuits higher order filters, structure and properties of the integrated filter LTC1060 are further analyzed here. Except this IC there are mentioned integrated filters commercially less available from the corporations Linear Technology and Maxim. The main objective of thesis was to propose and establish laboratory device and laboratory measurment focused on the switched capacitor circuits. The laboratory device has been designed with integrated circuits LTC1043 and LTC1060, which is demonstrated by using passive and active integrator, 2nd order band-pass and 4th order band-pass with Chebyshevovou approximation.