No / Over the past decade, wireless communications has experienced tremendous growth, and this growth is likely to multiply in the near future. The proliferation of mobile users and an ever increasing demand for multimedia services has resulted in greater capacity requirements. Radio frequency spectrum is scarce and cannot meet this ever increasing demand and the required Quality of Service (QoS) will no longer be achieved if efficient Radio Resource Management (RRM) solutions are not found. Conventional Radio Access Networks (RAN) have standalone Base Stations (BS) with capacity preconfigured for peak loads. These RANs have high call blocking and dropping rates since BSs resources cannot be shared. Cloud based RANs (C-RAN) have been proposed as a cost and energy efficient way of meeting high capacity demand of future wireless access networks by consolidating BSs to the cloud. Instead of relying on rejection of new call requests due to limited BS resources, C-RAN takes benefit of the cloud elasticity, which allows dynamic provisioning of cloud BS resources. This paper presents a novel C-RAN Call Admission Control (C-RAN CAC) to ensure Grade of Service (GoS) by improving blocking probability and improvement of call waiting times. Call blocking probability, call average waiting time and system utilization are used to evaluate the performance of the proposed CAC algorithm.

Submitted by Kelren Mota (kelrenlima@ufpa.br) on 2018-06-18T17:11:52Z No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertacao_AnaliseTecnicoEconomica.pdf: 3130966 bytes, checksum: 3d1245c2d90292a4f648d162c3d95245 (MD5) / Approved for entry into archive by Kelren Mota (kelrenlima@ufpa.br) on 2018-06-18T17:16:43Z (GMT) No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertacao_AnaliseTecnicoEconomica.pdf: 3130966 bytes, checksum: 3d1245c2d90292a4f648d162c3d95245 (MD5) / Made available in DSpace on 2018-06-18T17:16:43Z (GMT). No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertacao_AnaliseTecnicoEconomica.pdf: 3130966 bytes, checksum: 3d1245c2d90292a4f648d162c3d95245 (MD5) Previous issue date: 2018-03-06 / Diante dos desafios propostos pela quinta geração de redes móveis, a arquitetura C-RAN (Centralized Radio Acess Network) vem ganhando espaço por oferecer suporte `a redes ultra-densas de alta capacidade de próxima geração e oferecer economias. Esta dissertação propõe uma metodologia de modelagem de TCO (Total Cost of Ownership) para C-RAN, CAPEX (Capital Expenditure), OPEX (Operational Expenditure), sendo estes, os critérios fundamentais no ramo de avaliação e projeção de investimentos. Logo é apresentado com um maior nível de detalhamento quanto aos aspectos de investimento, que são de grande relevância para o cenário de arquitetura de redes móveis de comunicação. Dessa forma, este trabalho ´e conduzido no sentido de avaliar o contexto econômico de implantação de uma arquitetura centralizada, baseando-se, principalmente, nos aspectos financeiros que operadoras de serviços necessitam planejar antes de implantar uma nova rede de acesso móvel. O modelo proposto é utilizado em um estudo de caso em que o custo total de implementação e operação das arquiteturas distribuídas e centralizadas são comparados levando em consideração diversos cenários específicos. Os resultados apontam uma economia nos cenários centralizados e destacam os aspectos econômicos mais relevantes no planejamento da C-RAN. / Upon the the challenges proposed by the fifth generation of mobile networks, the architecture of C-RAN (Centralized Radio Acess Network) has gained space by supporting high-capacity ultra-densas networks of next generation and offering economies. This dissertation proposes a TCO (Total Cost of Ownership) for C-RAN, CAPEX (Capital Expenditure), OPEX (Operational Expenditure) and these are the fundamental criteria in the field of investment assessment and projection. It is soon presented with a higher level of detailing as to the investment aspects, which are of great relevance to the architectural landscape of mobile communication networks. In this way, this work is conducted in order to evaluate the economic context of the implementation of a centralized architecture, based mainly on the financial aspects that service operators need to plan before deploying a new Mobile Access Network. The proposed model is used in a case study where the total cost of implementation and operation of the distributed and centralized architectures is compared taking into account several specific scenarios. The results point to an economy in the centralized scenarios and highlight the most relevant economic aspects in the planning of C-RAN.

Network densification has become a dominant theme for capacity enhancement in cellular networks. However, it increases the operational complexity and expenditure for mobile network operators. Consequently, the essential features of Self-Organising Networks (SON) are considered to ensure the economic viability of the emerging cellular networks. This thesis focuses on quantifying the benefits of self-organisation in Cloud Radio Access Network (C-RAN) by proposing a flexible, energy efficient, and capacity optimised system. The Base Band Unit (BBU) and Remote Radio Head (RRH) map is formulated as an optimisation problem. A self-optimised C-RAN (SOCRAN) is proposed which hosts Genetic Algorithm (GA) and Discrete-Particle-Swarm-Optimisation algorithm (DPSO), developed for optimisation. Computational results based on different network scenarios demonstrate that DPSO delivers excellent performances for the key performance indicators compared to GA. The percentage of blocked users is reduced from 10.523% to 0.409% in a medium sized network scenario and 5.394% to 0.56% in a vast network scenario. Furthermore, an efficient resource utilisation scheme is proposed based on the concept of Cell Differentiation and Integration (CDI). The two-stage CDI scheme semi-statically scales the number of BBUs and RRHs to serve an offered load and dynamically defines the optimum BBU-RRH mapping to avoid unbalanced network scenarios. Computational results demonstrate significant throughput improvement in a CDI-enabled C-RAN compared to a fixed C-RAN, i.e., an average throughput increase of 45.53% and an average blocked users decrease of 23.149% is experienced. A power model is proposed to estimate the overall power consumption of C-RAN. Approximately 16% power reduction is calculated in a CDI-enabled C-RAN when compared to a fixed C-RAN, both serving the same geographical area. Moreover, a Divide-and-Sort load balancing scheme is proposed and compared to the SOCRAN scheme. Results show excellent performances by the Divide-and-Sort algorithm in small networks when compared to SOCRAN and K-mean clustering algorithm.

Abstract This thesis focuses on two important challenges in wireless downlink transmission: multi-user (MU) precoder design and scheduling of users over time, frequency, and spatial resources at any given instant. Data streams intended for different users are transmitted by a multiple-input multiple-output (MIMO) multi-antenna orthogonal frequency division multiplexing (OFDM) system. The transmit precoders are designed jointly across space-frequency resources to minimize the number of backlogged packets waiting at the coordinating base stations (BSs), thereby implicitly performing user scheduling. Then the problem of multicast beamformer design is considered wherein a subset of users belonging to a multicasting group are served by a common group-specific data. The design objective is to either minimize the transmit power for a guaranteed quality-of-service, or to maximize the minimum achievable rate among users for a given transmit power. Unlike existing techniques, the proposed design utilizes both the spatial and frequency resources jointly while designing multi-group beamformers. As an extension to coordinated precoding, the problem of beamformer design for cloud radio access network is considered wherein beamformers are designed centrally, quantized and sent along with data to the respective BSs via backhaul. Since the users can be served by multiple BSs, beamformer design becomes a nonconvex combinatorial problem. Unlike existing solutions, beamformer overhead is also included in the backhaul utilization along with the associated data. As the number of antennas increases, backhaul utilization is dominated by the beamformers. Thus, to reduce the overhead, two techniques are proposed: varying the quantization precision, and reducing the number of active antennas used for transmission. Finally, to reduce the complexity involved in the design of joint space- frequency approach, a two-step procedure is proposed, where a MU-MIMO scheduling algorithm is employed to find a subset of users for each scheduling block. The precoders are then designed only for the chosen users, thus reducing the complexity without compromising much on the throughput. In contrast to the null-space-based existing techniques, a low-complexity scheduling algorithm is proposed based on vector projections. The real-time performance of all the schedulers are evaluated by implementing them on both Xilinx ZYNQ-ZC702 system-on-chip (SoC) and TI TCI6636K2H multi-core SoC. / Tiivistelmä Tässä väitöskirjassa keskitytään kahteen tärkeään langattoman tiedonsiirron haasteeseen alalinkkilähetyksissä: usean käyttäjän (MU) esikooderisuunnitteluun ja käyttäjien skedulointiin aika-, taajuus- ja tilaresurssien yli. Eri käyttäjille tarkoitettuja datavirtoja lähetetään käyttämällä monitulo-monilähtötekniikkaa (MIMO) yhdistettynä monikantoaaltomodulointiin (OFDM). Lähettimien esikooderit suunnitellaan yhteisesti tila- ja taajuusresurssien yli, jotta keskenään yhteistoiminnallisten tukiasemien jonossa olevien pakettien määrää voitaisiin minimoida samalla kun tehdään epäsuorasti käyttäjien skedulointia. Tämän jälkeen työssä paneudutaan monilähetysten (multicast) keilanmuodostussuunnitteluun, jossa monilähetysryhmään kuuluvien käyttäjien alijoukolle lähetetään yhteistä ryhmäspesifistä dataa. Suunnittelun päämääränä on joko minimoida kokonaislähetysteho tietyllä palvelunlaatuvaatimuksella tai maksimoida pienin saavutettavissa oleva siirtonopeus käyttäjien joukossa tietyllä lähetysteholla. Toisin kuin olemassa olevat menetelmät, ehdotetussa mallissa käytetään yhteisesti sekä aika- että taajuusresursseja usean ryhmän keilanmuodostusta suunniteltaessa. Laajennuksena yhteistoiminnalliselle esikoodaukselle, väitöskirjassa käsitellään myös keilanmuodostusta pilvipohjaisessa radioliityntäverkkoarkkitehtuurissa. Keilanmuodostajat suunnitellaan keskitetysti, kvantisoidaan ja lähetetään datan mukana tukiasemille käyttäen runkoverkkoyhteyttä. Koska käyttäjiä voidaan palvella usealta tukiasemalta, keilanmuodostussuunnittelu muuttuu ei-konveksiksi kombinatoriseksi ongelmaksi. Toisin kuin olemassa olevissa ratkaisuissa, ehdotettu malli sisällyttää käyttäjien datan lisäksi keilanmuodostajien resursoinnin tarpeen runkoverkkoon. Tukiaseman antennien määrän lisääntyessä, keilanmuodostajien osuus runkoverkon käyttöasteesta kasvaa suureksi. Jotta keilanmuodostajien aiheuttamaa ylimääräistä tiedonsiirtotarvetta voitaisiin minimoida, esitellään kaksi tekniikkaa: kvantisointitarkkuuden muunteleminen sekä lähetykseen käytettävien aktiivisten antennien määrän vähentäminen. Lopuksi, jotta yhdistetyn tila-taajuussuunnittelun aiheuttamaa kompleksisuutta saataisiin vähennettyä, ehdotetaan kaksivaiheista menetelmää. MU-MIMO skedulointialgoritmin avulla etsitään ensin alijoukko käyttäjiä jokaiselle skedulointilohkolle. Esikooderit suunnitellaan vain valituille käyttäjille, mikä vähentää kompleksisuutta, heikentämättä suorituskykyä kuitenkaan olennaisesti. Poiketen nolla-avaruuteen perustuvista tekniikoista, esitetään yksinkertainen vektoriprojektioihin perustuva skeduleri. Kaikkien skedulerien reaaliaikasuorituskykyä on arvioitu toteuttamalla ne ohjelmoitavilla Xilinx ZYNQ-ZC702 system-on-chip (SoC) ja TI TCI6636K2H moniydinalustoilla.