Novel printed slot antennas are demonstrated in this thesis. For the linear polarization design, CPW-fed strip-loaded square slot antenna is presented for achieving broadband operations. For the circular polarization, two novel antenna designs are also presented¡Fone is a CPW-fed square slot antenna with an inverted L tunning stub, and the other is a microstrip line-fed square slot antenna with a conducting strip from ground plane for broadband circularly polarized radiation. Finally, an antenna design having compact size and broadband characteristic is shown.

The novel designs of circular microstrip antennas have been investigated in this dissertation. In the linearly polarized designs, the study of single-feed dual-frequency circular microstrip antenna with an open-ring slot has been firstly presented. As for the broadband circular microstrip antenna designs, antennas with two open-ring slots, embedded reactive loading by probe feed and microstrip-line feed have been presented. The antenna bandwidth of them can be enhanced about 4% to 6%. In the circularly polarized designs, we have proposed a circularly polarized microstrip antenna with a spur line. By choosing a suitable length of the spur line, CP operation can be obtained. And then, such a design can be applied to a compact circular patch antenna with bent slots. These reduced the antenna size to be 40%~50% of that of the simple case. Finally, we use the ideas of CP operation with elliptic patch and dual-frequency operation with stacked patch to propose a dual-band circularly polarized stacked elliptic microstrip antenna design. The frequency ratio of this design is about 1.39.

Novel designs of printed slot antennas have been investigated in this dissertation. For the linearly polarized designs, the study of single-feed dual-frequency printed slot antennas with an open-ring conducting strip is first presented. In addition, a novel design of dual-frequency dual-loop printed slot antenna is described. As for the broadband printed slot antenna designs, a printed semicircular slot antenna with a microstripline feed is shown. The impedance bandwidth obtained reaches about 46%. For the circularly polarized designs, we propose a circularly polarized microstrip antenna with an asymmetry of the antenna structure. By choosing a suitable meandered slot, CP operation can be obtained. Finally, we apply the design concept of CP operation using a shorted section to achieve a circularly polarized printed slot antenna design. The obtained CP bandwidth of this design is greater than 8%.

The designs of various feeding networks for microstrip antennas have been investigated in this dissertation. In the active microstrip antenna designs, an amplifier-type microstrip antenna integrates a two- port amplifier circuitry to the various passive antennas through a 50£[ inset microstrip feed line which can function in broadband operation¡ACP operation and dual-frequency operation. As for the broadband circularly polarized microstrip antenna with a dual-perpendicular feed design, antenna with a dual-perpendicular feed which was formed by a Wilkinson power divider with a quarter-wavelength section of microstrip line for providing equal splitting of the input power and 90¢X phase difference to the two feed points has been presented. The broadband CP bandwidth can be achieved due to the good isolation between the two output lines of the feed network. In the microstrip antennas with CPW feed designs, we first proposed a microstrip antenna with three-dimensional CPW feed. A separate feed substrate is used which can provide a large-area space for the layout of complicated microwave circuitry. In addition, the feed substrate can also be oriented to the patch substrate with various angles, resulting in more flexibility in the proposed three-dimensional feed design. Finally, we proposed a design with two slot lines located at both sides of the coupling slot which can lengthen the excited patch surface current path, thus the resonant frequency is reduced and an antenna size reduction up to 40% has been obtained.