1 |
Identification of cladding-structure interaction in highrise buildings using parameter estimation methodsMeyyappa, Murugappan 05 1900 (has links)
No description available.
|
2 |
Sensing and control of Nd:YAG laser cladding processSalehi, Dariush, ds_salehi@yahoo.com January 2005 (has links)
Surface engineering provides solutions to wear and corrosion degradation of engineering components. Laser cladding is a surfacing process used to produce wear and corrosion resistant surfaces by covering a particular part of the substrate with another material that has superior properties, producing a fusion bond between the two materials with minimal dilution of the clad layer by the substrate. The advantages of laser cladding compared to conventional techniques include low and controllable heat input into the workpiece, a high cooling rate, great processing flexibility, low distortion due to the low heat input to the workpiece and minimal post-treatment. The main processing parameters of laser cladding include laser power, laser spot size, processing speed, and powder feed rate. Within an optimized operational window, all these variables have some effect on the temperature of the clad interaction zone. The laser cladding technique is very complicated because it involves metallurgical and physical phenomena, such as laser beam-materials interaction, heat transfer between the clad and the substrate, and the interdiffusion of the clad and the substrate materials. Laser cladding is currently an open-loop process, relying on the skills of the operator and requiring dedication to specialty to make it successful. Unless the required expertise is provided, attempts to make the process successful will be futile. The objective in conducting the project was to investigate and develop prototype sensors to monitor and control Nd:YAG laser cladding process. Through a LabVIEW software based monitoring program, real-time process monitoring of optical emissions in the form of light and heat radiation was carried out, and correlated with the properties of the produced clad layers. During various experiments, single- and multiple-track laser cladding trials were performed. The responses of such sensors to the selected conditions were examined and an in depth analysis of detected heat and optical radiation signals was carried out. The results of these experiments showed the ability of such sensors to recognize changes in process parameters, and detected defects on layer surfaces along with the presence of oxides. A multi-function closed-loop laser power and CNC motion table feed rate control interface based on a LabVIEW platform has been designed and built, which is capable of accepting and interpreting sensors� data and adjusting accordingly the laser power and CNC motion table feed rate to produce sound clad layers. The developed dual control strategy utilized in this study forms a relatively inexpensive and less-complicated system that allows end-users to achieve lower failure rates during laser cladding (within its own limitations) and, therefore, through successful concurrent control of melt pool temperature and motion table feed rate provide better productivity and quality in the experimentally produced clad layers.
|
3 |
Simulation results of an inductively-coupled rf plasma torch in two and three dimensions for producing a metal matrix composite for nuclear fuel claddingHolik III, Eddie Frank (Trey) 15 May 2009 (has links)
I propose to develop a new method for the synthesis of metal matrix composites
(MMC) using aerosol reactants in a radio frequency (RF) plasma torch. An inductivelycoupled
RF plasma torch (ICPT) may potentially be designed to maintain laminar flow
and a radial temperature distribution. These two properties provide a method by which a
succession of metal layers can be applied to the surface of SiC fibers. In particular, the
envisaged method provides a means to fully bond any desired metal to the surface of the
SiC fibers, opening the possibility for MMCs in which the matrix metal is a highstrength
steel.
A crucial first step in creating the MMC is to test the feasibility of constructing
an ICPT with completely laminar flow in the plasma region. In this work, a
magnetohydrodynamic (MHD) model is used along with a computational fluid dynamic
(CFD) software package called FLUENT© to simulate an ICPT. To solve the
electromagnetic equations and incorporate forces and resistive heating, several userdefined
functions (UDF) were written to add to the functionality of FLUENT©. Initially,
an azimuthally-symmetric, two-dimensional model was created to set a test baseline for
operating in FLUENT© and to verify the UDF. To incorporate coil angle and current
leads, a fully three dimensional model UDF was written. Preliminary results confirm the
functionality of the code. Additionally, the results reveal a non-mixing, laminar flow
outer region for an axis-symmetric ICPT.
|
4 |
Manufacture of novel bearings by laserXiao, Di-Chen January 1994 (has links)
No description available.
|
5 |
Evaluation of tilt-up construction in relation to selected UK building typesGlass, Jacqueline January 1997 (has links)
No description available.
|
6 |
Development of energy dissipating cladding connections for passive control of building seismic responsePinelli, Jean-Paul 12 1900 (has links)
No description available.
|
7 |
The potential of building-integrated photovoltaic systems in Zimbabwe and their application to thermal environmental controlMunyati, Edmund January 1999 (has links)
No description available.
|
8 |
An integrated laser cladding and stress improvement for enhancing surface propertiesMartinez Hurtado, Alonso January 2016 (has links)
Laser cladding is a process that is used to improve the properties of a metal surface. The properties in question may include hardness, wear-, corrosion- and/or fatigue-resistance. The process involves fusing a thin layer of additional metal to the original surface, using a laser as the heat source. Unfortunately, residual stresses are generated due to the rapid and highly localised thermal expansion and contraction that occur during the heating-melting-solidification-cooling cycle. These residual stresses can have a detrimental effect on the final performance of the clad component, especially with respect to corrosion resistance. Detrimental tensile residual stresses can be mitigated through the use of post-processing techniques such as laser shock peening (LSP). LSP is a process that uses a pulsed laser to generate intense spots of recoil pressure on a surface, thereby introducing compressive residual stresses. Post weld heat treatment (PWHT) is another process that could be also used in laser cladding in order to relieve tensile residual stresses. In this work, laser cladding was carried out by depositing a clad layer of AISI grade 316L stainless steel on to either a S275 steel substrate or an AISI grade 316L stainless steel substrate, using different process parameters. The hardness and residual stresses in the overlay and substrate were assessed for each laser clad sample before and after being treated with LSP and PWHT. The corrosion rate and microstructure were also assessed in each case. The novelty of this work is two-fold. Firstly, to the author's knowledge, it is the first study that attempts to link process parameters to both the residual stresses and the corrosion performance of austenitic stainless steel overlays deposited by laser cladding. The second novel aspect is based on the application of both LSP and PWHT to the deposited overlay in order to investigate whether an improvement in the mechanical properties and the corrosion resistance can be realised. In this study, tensile residual stresses were generated in the clad layers. However, the magnitude of the residual stresses did not appear to be particularly sensitive to the deposition parameters. Indeed, it was found that the number of layers that is deposited is more important than the choice of process parameters. LSP was effective in reducing the tensile residual stresses and in fact it introduced compressive stresses to all the samples that were treated. In contrast, PWHT only led to satisfactory stress relief when the AISI grade 316L stainless steel was deposited on to a matching substrate material. This was related to the fact that a difference between the thermal expansion coefficients of the overlay and substrate led to the development of significant tensile residual stresses on cooling down after PWHT. The corrosion tests on the clad coupons led to the development of pits and cracks. However, after LSP only pits were found, without any sign of cracking, for the test durations that were investigated owing to the fact that compressive stresses were generated. Similar results were found after PWHT for the clad samples in which the overlay material matched the substrate material. However, signs of cracking were observed after PWHT in samples where AISI grade 316L stainless steel was deposited on to an S275 steel substrate due to tensile residual stresses remaining within the overlay. This result suggests that there may be little benefit in carrying out PWHT for components in which grade 316L stainless steel is deposited on to a steel substrate. In contrast, there appear to be clear benefits associated with carrying out LSP in order to mitigate the residual stresses and retard the onset of cracking.
|
9 |
Characterizing the influence of process variables in laser cladding Al-20WT%Si onto an Aluminium SubstrateVon Wielligh, Louis George Unknown Date (has links)
The research investigated the application of continuous coaxial laser cladding by powder injection as a surface treatment or coating process. The investigation aimed to establish the relationship between a change in the main laser cladding process variables and the geometry and characteristics of an Al-20wt-Si single pass clad layer formed on an Al 1370-F substrate using a Nd:YAG laser. The main process variables considered were: laser power, laser scanning velocity and the powder feed rate. The relationship between a change in the main laser cladding process variables and the geometry and characteristics of the clad layer was established by statistically analysing the variation in the process response with a change in the main laser cladding process variables. The process variables were varied based on a full-factorial, experimentally optimized test matrix. The clad geometry which is mainly defined by: the clad height, width, clad aspect ratio, depth of alloy penetration, and the clad root angle/wetting angle was investigated. In addition to the clad geometry several clad characteristics were investigated such as the dilution of the clad layer in the substrate material, the Vickers microhardness and microstructure of the clad crosssection, the powder efficiency of the process and the amount of visible defects. The study successfully established the relationship between the main laser cladding process variables and the clad geometry and characteristics. The secondary objective of establishing a suitable processing window by considering the relationship mentioned above was only partially met since it is believed that further refinement of the experimental cladding test setup and therefore also the experimental variable test levels is required.
|
10 |
Porovnání navařování svazkem elektronů a plazmou / Comparison of cladding by the electron beam and plasma processRudyk, Martin January 2014 (has links)
This diploma thesis deals with plasma cladding and electron beam cladding. The theoretical part is divided into several chapters which is focused on description of these methods of cladding process. In the practical part the particular experiment of electron beam cladding (EBC) and plasma cladding (PC) is described. In the conclusion overall results were assessed, both methods were compared each other and possible exploitation in industry was described.
|
Page generated in 0.0156 seconds