611 |
Modelling heat and mass flow through packed pebble beds a heterogeneous volume-averaged approach /Visser, Coert Johannes. January 2007 (has links)
Thesis (M.Eng. (Mechanical )) -- University of Pretoria, 2007. / Includes bibliographical references (leaves 73-81)
|
612 |
Investigating capillary pressure and interfacial area for multiphase flow in porous media using pore-scale imaging and lattice-Boltzmann modeling /Porter, Mark L. January 1900 (has links)
Thesis (Ph. D.)--Oregon State University, 2009. / Printout. Includes bibliographical references (leaves 113-127). Also available on the World Wide Web.
|
613 |
The implementation of four additional inviscid flux methods in the U²NCLE parallel unstructured Navier-Stokes solverCureton, Christopher Wayne, January 2007 (has links)
Thesis (M.S.)--Mississippi State University. Department of Aerospace Engineering. / Title from title screen. Includes bibliographical references.
|
614 |
Facilitating higher-fidelity simulations of axial compressor instability and other turbomachinery flow conditionsHerrick, Gregory Paul, January 2008 (has links)
Thesis (Ph.D.)--Mississippi State University. Department of Aerospace Engineering. / Title from title screen. Includes bibliographical references.
|
615 |
Enabling the direct simulation (Monte Carlo) of physical vapor depositionVenkataraman, Ramprasad. Unknown Date (has links) (PDF)
Thesis (M.S.)--University of Alabama at Birmingham, 2008. / Title from PDF of title page (viewed July 24, 2009). Includes bibliographical references (p. 129-138).
|
616 |
Advanced thermal management strategies for energy-efficient data centersSomani, Ankit. January 2009 (has links)
Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2009. / Committee Chair: Joshi, Yogendra; Committee Member: ghiaasiaan, mostafa; Committee Member: Schwan, Karsten. Part of the SMARTech Electronic Thesis and Dissertation Collection.
|
617 |
Anisotropic parameters of mesh fillers relevant to miniature cryocoolersLandrum, Evan. January 2009 (has links)
Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2009. / Committee Chair: Ghiaasiaan, S. Mostafa; Committee Member: Desai, Prateen; Committee Member: Jeter, Sheldon; Committee Member: Kirkconnell, Carl.
|
618 |
Evaluation of human exposure to indoor airborne pollutants transport and fate of particulate and gaseous pollutants /Rim, Donghyun. January 1900 (has links)
Thesis (Ph. D.)--University of Texas at Austin, 2009. / Title from PDF title page (University of Texas Digital Repository, viewed on Sept. 9, 2009). Vita. Includes bibliographical references.
|
619 |
Assessing the v²-f turbulence models for circulation control applications a thesis /Storm, Travis Marshall. Marshall, David D., January 1900 (has links)
Thesis (M.S.)--California Polytechnic State University, 2010. / Title from PDF title page; viewed on May 20, 2010. Major professor: David Marshall, Ph.D. "Presented to the faculty of California Polytechnic State University, San Luis Obispo." "In partial fulfillment of the requirements for the degree [of] Master of Science in Aerospace Engineering." "April 2010." Includes bibliographical references (p. 80-82).
|
620 |
Επίλυση προβλημάτων υπολογιστικής ρευστομηχανικής σε αιμοφόρα αγγεία με ταύτιση λύσεων σε κατανεμημένα σημεία (κόμβους) στο πεδίο ροής του με τη μέθοδο της μη πλεγματικής διαμόρφωσης (meshless method)Μπουραντάς, Γεώργιος 19 May 2011 (has links)
O σκοπός της παρούσας διδακτορικής διατριβής είναι διττός και, εμπεριέχει δραστηριότητα τόσο στο κομμάτι της εφαρμοσμένης όσο και της βασικής έρευνας. Πιο συγκεκριμένα, περιλαμβάνει την εφαρμογή σύγχρονων υπολογιστικών μεθόδων (Μέθοδος Πεπερασμένων Στοιχείων, Μέθοδος Πεπερασμένων Όγκων) στη μελέτη της ροής του αίματος, καθώς και την ανάπτυξη σύγχρονων υπολογιστικών μεθοδολογιών που δε στηρίζονται στη χρήση πλέγματος. Ταυτόχρονα μελετάται η αποτελεσματική εφαρμογή των μεθόδων της Υπολογιστικής Ρευστομηχανικής στην ιατρική πρακτική (Simulation Treatment Planning), για την αποτελεσματική πρόληψη, διάγνωση και θεραπευτική αντιμετώπιση των νόσων του καρδιακού και περιφερικού αγγειακού συστήματος. Η διαδικασία υλοποίησης των προσομοιώσεων έχουν σκοπό την υποβοήθηση του θεράποντα ιατρού στη λήψη ιατρικής απόφασης σχετικά με τη θεραπευτική αγωγή.
Παράλληλα, στο κομμάτι της βασικής έρευνας αναπτύσσονται σύγχρονες υπολογιστικές μέθοδοι οι οποίες πρόκειται να καλύψουν τις αδυναμίες που παρουσιάζουν οι διαδεδομένες υπολογιστικές μέθοδοι. Η υλοποίησή τους βρίσκει ανταπόκριση και πεδίο εφαρμογής σε διάφορους τομείς της Επιστήμης και της Μηχανικής. Έτσι, θα παρουσιαστούν αποτελέσματα μόνο στο τομέα της Υπολογιστικής Ρευστομηχανικής. Τα κριτήρια αυτά θα στηριχθούν σε ποσοτικές συνδυαστικές αναλύσεις, οι οποίες ενσωματώνουν το state-of-the-art της μορφολογικής απεικόνισης των αγγείων στο state-of-the-art των μεθοδολογιών της υπολογιστικής ρευστομηχανικής, οι οποίες είναι άμεσα σχετιζόμενες με την εκτίμηση των αιμοδυναμικών παραγόντων και τάσεων που εφαρμόζονται σε πάσχουσες περιοχές του αγγειακού συστήματος, όπως στενώσεις, θρόμβοι και ανευρύσματα. / The aim of present doctoral thesis is double fold and, includes research activity both in the fields of applied and basic research. More precisely, it includes the application of modern numerical methods (Finite Element Method, Finite Volume Method) for the study of blood flow, as well as the development of modern numerical methodologies, which do not rely on the use of a computational mesh, that is the so-called meshless or Meshfree methods. Furthermore, the effective application of sophisticated numerical methods in the medical practice (Simulation Treatment Planning) has been studied, since there is a great necessity for effective prevention, diagnosis and therapeutic confrontation of illnesses the cardiac and vascular system. The simulation conducted they aim to assist the doctor in the decision-making.
At the same time, regarding of area of the basic research, sophisticated numerical methods were developed and applied to various applications of science and engineering. More precisely, results will be presented for Computational Fluid Dynamics problems.
|
Page generated in 0.023 seconds