1 |
Novel metamaterial structures for microwave component and circuit performance enhancementsDecle Colin, Daniel January 2015 (has links)
In the thesis presented, three novel uni-planar left handed transmission lines based on Complementary Split Ring Resonators (CSRR) and Complementary Spiral Resonator (CSR) metamaterial particles are proposed for the first time and successfully applied for the performance enhancement of conventional coupled line filters and the design of a full scan leaky wave antenna. Based on the implementation of Complementary Split Ring Resonators (CSRR) a fully planar Composite Right left handed transmission line (CRLH-TL) plus a Dual Composite Right Left Handed transmission line (D-CRLH-TL) are proposed, designed and studied. The CRLH transmission line is realized loading a microstrip host line with CSRR metamaterial particles and capacitive gaps on the conductor strip of the line, while the D-CRLH transmission line is built bridging the capacitive gaps between the CSRR's with inductive connections to induce dual propagation properties in the structure. A further performance enhancement is achieved by a second proposal based on the implementation of Complementary Spiral Resonators (CSRs). The studies applied to the structure reveal that conditions for D-CRLH propagation are created in a transmission line composed only by CSR metamaterial resonant particles as the result of the unique electromagnetic properties acquired by the CSRs etched on the conductor line of a microstrip waveguide. The CSRR/CSR based D-CRLH transmission lines proposed are applied in the design of two enhanced coupled line filters. The implementation is possible for the first time in this work as result of the highly versatile layout features of the left handed transmission lines proposed which among other important geometrical features, allows couplings in both sides of the structure. Enhanced filtering features are reached by the metamaterial based coupled line filters proposed in terms of selectivity and size reduction in comparison with conventional coupled line filters. In the case of the CSRR loaded metamaterial coupled line filter a size reduction of 49% is achieved compared with a filter of similar performance. A further enhancement is reached by the second coupled filter proposed based on CSR metamaterial resonant particles. The CSR coupled filter proposed reach a roll off rate improvement of 8 dB/GHz and size reduction of 43% in comparison with a conventional coupled line filter of the same order. When this is compared against a conventional coupled line filter of similar performance but higher order, a remarkable size reduction of 77% is achieved by the proposed CSR coupled line filter. Finally, the CSR loaded D-CRLH transmission line is applied in the design of a fully planar leaky wave antenna. Using the CSR structures etched on the conductor line of a microstrip as part of the radiation mechanism altogether with the D-CRLH propagation features of the structure. A full scan radiation pattern is created with backward, forward and broadside radiation as result of the left handed propagation band, right handed propagation band and the balanced transition between them. Two leaky wave antennas are designed to operate at the centre frequencies of 12.5GHz and 6.0GHz. In order to corroborate the performance the CSR D-CRLH leaky wave antenna operating at 6.0GHz is fabricated and measured showing a scanning range of 30 deg with a maximum gain of 13.2 dBi.
|
2 |
Contribution à l'étude et la faisabilité de micro-résonateurs en structure planaire / Contribution to the study and the feasibility of micro-resonators in planar structureZermane, Aziza 29 June 2011 (has links)
Ce travail concerne l’étude et la réalisation de dispositifs hyperfréquences coplanaires de type composite main droite/gauche (CRLH). Dans la première partie du mémoire, l’état de l’art des structures CRLH et leur aspect théorique sont présentés. La deuxième partie concerne la modélisation circuit et la conception de la cellule CRLH de base. Un modèle circuit a été développé à partir des modèles existants. Un résonateur d’ordre zéro (ZOR en anglais) à couplage capacitif a été fabriqué et les résultats expérimentaux nous ont permis de valider le modèle théorique. Une réduction de 80% de la taille du résonateur a été observée par rapport au résonateur demi-longueur d’onde à la même fréquence du travail. Une ligne de transmission à deux bandes de propagation a été réalisée par la mise en cascade de cinq cellules CRLH de base. La troisième partie est vouée à l’utilisation des couches magnétiques dans les structures CRLH pour réaliser des dispositifs hyperfréquences accordables. L’agilité en fréquence du ZOR a été confirmée expérimentalement. Nous avons aussi proposé un modèle théorique simple de la cellule CRLH réalisée sur un substrat de YIG. Les résultats expérimentaux de la ligne CRLH à ferrite et pour différentes valeurs du champ magnétique appliqué sont présentés et comparés au modèle théorique et aux simulations 3D / This work deals with the study and the fabrication of microwave devices based on the Coplanar Composite Right/Left Handed (CPW CRLH) structures. In the first part, we introduce the CRLH theory. In the second part, circuit modelization and the design of the CPW CRLH unit cell are presented. A coplanar zeroth-order resonator has been numerically studied, realized and verified experimentally. The resonator we have proposed allows a reduction of 80% of its size compared to the conventional half-wave length resonator at 6GHz. Based on the unit cell, a CRLH TL with five elementary cells has been realized. The third part is devoted to the use of magnetic layers in CRLH structures to realise tunable microwave devices. The frequency agility of the ZOR was experimentally confirmed. We also developed a theoretical model of the CRLH unit cell with a YIG substrate. The experimental results of the CRLH line with ferrite and for different values of applied magnetic field are presented and compared with the theoretical model and 3D simulations
|
3 |
Metamaterial Antenna for Medical ApplicationsHasan, Md Kamrul 14 October 2013 (has links)
No description available.
|
4 |
Bandwidth and gain enhancement of composite right/left-handed metamaterial transmission-line planar antenna employing a non foster impedance matching circuit boardAlibakhshikenari, M., Virdee, B.S., Althuwayb, A.A., Azpilicueta, L., Ojaroudi Parchin, Naser, See, C.H., Abd-Alhameed, Raed, Falcone, F., Huynen, I., Denidni, T.A., Limiti, E. 11 April 2021 (has links)
Yes / The paper demonstrates an effective technique to significantly enhance the bandwidth and radiation gain of an otherwise narrowband composite right/left-handed transmission-line (CRLH-TL) antenna using a non-Foster impedance matching circuit (NF-IMC) without affecting the antenna's stability. This is achieved by using the negative reactance of the NF-IMC to counteract the input capacitance of the antenna. Series capacitance of the CRLH-TL unit-cell is created by etching a dielectric spiral slot inside a rectangular microstrip patch that is grounded through a spiraled microstrip inductance. The overall size of the antenna, including the NF-IMC at its lowest operating frequency is 0.335λ0 × 0.137λ0 × 0.003λ0, where λ0 is the free-space wavelength at 1.4 GHz. The performance of the antenna was verified through actual measurements. The stable bandwidth of the antenna for |S11|≤ - 18 dB is greater than 1 GHz (1.4-2.45 GHz), which is significantly wider than the CRLH-TL antenna without the proposed impedance matching circuit. In addition, with the proposed technique the measured radiation gain and efficiency of the antenna are increased on average by 3.2 dBi and 31.5% over the operating frequency band. / This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the financial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1.
|
5 |
Využití metamateriálů pro zlepšení parametrů antén / Improving antenna parameters by the application of metamaterialsŠporik, Vladimír January 2009 (has links)
The thesis is focused on the design of a planar resonant-type antenna, which exploits a proper combination of left- and right-handed properties of transmission lines. This transmission line is called CRLH TL and is based on Sievenpiper mushroom structure. Advantages of the proposed antenna concept are demonstrated by a detailed comparison of its basic properties with the properties of a conventional patch antenna.
|
6 |
High-gain metasurface in polyimide on-chip antenna based on CRLH-TL for sub-terahertz integrated circuitsAlibakhshikenari, M., Virdee, B.S., See, C.H., Abd-Alhameed, Raed, Falcone, F., Limiti, E. 05 August 2020 (has links)
Yes / This paper presents a novel on-chip antenna using standard CMOS-technology based on metasurface implemented on two-layers polyimide substrates with a thickness of 500 μm. The aluminium ground-plane with thickness of 3 μm is sandwiched between the two-layers. Concentric dielectric-rings are etched in the ground-plane under the radiation patches implemented on the top-layer. The radiation patches comprise concentric metal-rings that are arranged in a 3 × 3 matrix. The antennas are excited by coupling electromagnetic energy through the gaps of the concentric dielectric-rings in the ground-plane using a microstrip feedline created on the bottom polyimide-layer. The open-ended feedline is split in three-branches that are aligned under the radiation elements to couple the maximum energy. In this structure, the concentric metal-rings essentially act as series left-handed capacitances CL that extend the effective aperture area of the antenna without affecting its dimensions, and the concentric dielectric rings etched in the ground-plane act as shunt left-handed inductors LL, which suppress the surface-waves and reduce the substrates losses that leads to improved bandwidth and radiation properties. The overall structure behaves like a metasurface that is shown to exhibit a very large bandwidth of 0.350–0.385 THz with an average radiation gain and efficiency of 8.15dBi and 65.71%, respectively. It has dimensions of 6 × 6 × 1 mm3 that makes it suitable for on-chip implementation. / This work is partially supported by RTI2018-095499-B-C31, Funded by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (MCIU/AEI/FEDER,UE), and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424 and the fnancial support from the UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1. / Research Development Fund Publication Prize Award winner, March 2020
|
Page generated in 0.0142 seconds