Bakgrund: Intracerebral hjärnblödning (ICH) står för omkring 20 % av alla cerebrovaskulära sjukdomar och uppkommer oftast snabbt, vanligtvis i samband med aktivitet. Är blödningen stor kan hjärnans mittstrukturer flytta på sig, vilket i värsta fall kan leda till koma eller döden. Datortomografi (CT) och magnetisk resonanstomografi (MR) är idag de vanligaste radiologiska undersökningsmetoderna för att upptäcka en ICH.   Syfte: Att jämföra CT och MR vid diagnosticering av ICH, för att ta reda på respektive undersökningsmetods för- och nackdelar och därför kunna avgöra vilken metod som är att föredra vid diagnosticering av ICH.   Metod: En litteraturstudie baserad på artiklar funna i databasen PubMed genomfördes, där åtta artiklar hittades vid sökning. Två artiklar hittades vid en manuell sökning.   Resultat: MR är bra i ett tidigt stadium vid ICH. Gradient echos (GRE) roll vid MR verkar vara bra vid undersökning av ICH, men är likvärdig med CT, däremot tyder det på att GRE är mer noggrann än CT vad gäller mätning av blödningens volym, då den mätta volymen visar sig bli större med GRE än med CT däremot kan CT vara mindre tillförlitlig vid små ICH.   Konklusion: Denna litteraturstudies resultat tyder på att MR är en säkrare diagnostisk metod vid ICH än CT, däremot krävs större studier inom detta område för att kunna dra en definitiv slutsats.

Erlangen, Nürnberg, Universiẗat, Diss., 2006. / Enth. 1 Sonderabdr. aus: European radiology ; 14. 2004. - Beitr. teilw. dt., teilw. engl.

Ulm, Univ., Diss., 2007.

Includes bibliographical references. / Three problems are addressed in this dissertation. They are intracranial volume extraction, noise suppression and automated segmentation of X-Ray Computerized Tomography (CT) images. The segmentation scheme is based on a Seeded Region Growing algorithm. The intracranial volume extraction is based on image symmetry and the noise suppression filter is based on the Gaussian nature of the tissue distribution. Both are essential in achieving good segmentation results. Simulated phantoms and real medical images were used in testing and development of the algorithms. The testing was done over a wide range of noise values, object sizes and mean object grey levels. All the methods were first implemented in two- and then three-dimensions. The 3-D implementation also included an investigation into volume formation and the advantages of 3-D processing. The results of the intracranial extraction showed that 9% of the data in the relevant grey level range consisted of unwanted scalp (The scalp is spatially not part of the intracranial volume, but has the same grey level values). This justified the extraction the intracranial volume for further processing. For phantom objects greater than 741.51mm³ (voxel resolution 0.48mm x 0.48mm x 2mm) and having a mean grey level distance of 10 from any other object, a maximum segmentation volume error of 15% was achieved.

Indiana University-Purdue University Indianapolis (IUPUI) / Radiation Therapy has been one of the most common techniques to treat various types of cancers, in particular is Head and Neck Cancer (HNC) which accounts for three percent of all cancers in the United States. During the treatment procedure, the patient is immobilized using immobilization devices such as the full head face mask, bite blocks, stereotactic frame, etc. to get accurate location of tumor. The disadvantage of these devices is that they are very uncomfortable to the patient especially people suffering from Post-Traumatic Stress Disorder (PTSD) and claustrophobia who cannot wear any confined masked system such as the full head mask or bite block during the treatment procedure. To mitigate this problem, there has been a lot of research in modifying such immobilizing devices without neglecting the accurate location of tumor. To this end, the research presented in this thesis focuses on developing a mask less system with accurately locating the position of tumor using the technique of coordinate transformation at the same time fulfilling the three important characteristics: • Comfort • Accuracy • Low price Such a system is comfortable to the patient because no confining mask system is used and we choose minimal contact points on the patient for fixing the patient. Traditionally, such type of cancer treatment is carried out in two stages: Diagnosis stage, which identifies the location of the tumor and the external markers and the Treatment stage where the tumor is treated with immobilization device being common in both the stages. In the new system, the immobilization devices vary at the two stages. The head position is monitored by using pressure sensor assembly where spring and pressure sensor setup detects the amount and direction of head deviation. We also prepare a customized 3D printed nose bridge part for extra referencing in the treatment room. Also, it is important that we use material for our immobilization devices which does not contain any metal and MRI compatible. Once the patient lies down on the treatment couch and is immobilized using the immobilization devices, then tumor location is calculated using the theory of coordinate transformation and transformation matrix in the Diagnosis and Treatment Stage. To validate the system, simulation of immobilization devices used in the new design was carried out using ANSYS Workbench 15.0 and LS-Dyna software’s Explicit Dynamics method. The simulation for the head-fixing device showed a deflection of ±0.1974 mm with respect to machine isocenter with a load of 60 N, which is lower than the customer requirement of ±3 mm with respect to machine isocenter of head deviation. The material used for the external markers for patient positioning was selected to be polyetheretherketone (PEEK) which is a radiolucent and widely used MRI compatible material. The system also takes into consideration the effect of weight loss, which is one of the drawbacks of the current systems. Although still in the development stage, this mask less system holds to be the next new variety of immobilization devices that are comfortable to the patient and less expensive to be implemented in future cancer treatment practices.

Objetivo: avaliar cor, brilho, rugosidade e alterações ultraestruturais do esmalte dental clareado com peróxido de hidrogênio a 35 %, submetido ao tratamento prévio com agente desproteinizante, ou ao tratamento posterior com o agente remineralizador fosforopeptídeo de caseína/fosfato de cálcio amorfo (ACP-CPP). Material e Métodos: Os grupos experimentais foram: GC (controle/consultório): H2O2 a 35 % - 4 sessões de 8 min; GE1 (primer+consultório): NaOCl 5,25 % por 1 min, aplicação do H2O2 a 35 % como no GC; e GE2 (consultório+ACP): GC + ACP-CPP diariamente por 7 dias. Fragmentos contendo esmalte e dentina (n=8), obtidos de dentes bovinos, foram utilizados para avaliar cor, brilho e a rugosidade. Alteração de cor (E), parâmetros L* e b* foram determinados com colorímetro e o brilho superficial com glossímetro antes, imediatamente após (1h), 4 e 7 dias após o tratamento. Parâmetros de rugosidades, Ra, Rt e RSm, foram obtidos com perfilômetro de contato antes, imediatamente após o tratamento e 7 dias após os tratamentos. Os resultados de E, brilho superficial e rugosidade foram avaliados separadamente usando ANOVA 2 fatores e teste de Tukey (p=0,05). Para avaliar a alteração ultraestrutural, dentes pré-molares humanos, seccionados nos sentidos vestibulo-lingual e mesio distal foram observados em microscópio eletrônico de varredura, por emissão de campo, e realizada a quantificação de elementos químicos por EDS. Análise tridimensional da estrutura do esmalte foi realizada por microtomografia computadorizada (micro-CT) com resolução 11,24 m (n=8). Foram realizadas análises dos parâmetros estruturais: espessura estrutural (St.Th.), separação estrutural (St.Sp.) e índice de fragmentação (Fr.I.) antes e após os tratamentos em duas regiões: ROI 1= 56,2 m e ROI 2= 110,2 m, ambas a partir da superfície vestibular. Foi utilizado o teste t pareado para análise estatística de cada parâmetro estrutural. Resultados: Não houve diferença estatística entre os diferentes tratamentos de superfície para E, Ra e RSm. Imediatamente após o clareamento (1h) ocorreu maior aumento do L* e queda do brilho superficial que se manteve por 7 dias. O uso de agente desproteinizante em dentes bovinos não acentuou a redução do brilho do esmalte, mas a aplicação de ACP-CPP acarretou em maior perda brilho e aumento nos valores de rugosidade após 7 dias para Rt. A aplicação do agente desproteinizante previamente ao clareamento em dente humano revelou uma superfície mais lisa, sem alterar os parâmetros estruturais. Há uma maior quantidade de cálcio, formação de um manto de recobrimento após aplicação de ACP-CPP em torno dos prismas de esmalte, aumento de St.Th de 4,1m, menor espaçamento entre os cristais de hidroxiapatita e redução de St.Sp em 0,8 m e de Fr.I em 0,01 no ROI-1 após 7 dias. Conclusão: O uso de agente desproteinizante não altera a cor, brilho e a ultraestrutura inorgânica. A aplicação de ACP-CPP após a técnica de clareamento de consultório não contribui para alteração de cor, mas reduz o brilho e altera a ultraestrutura da porção mais externa do esmalte após 7 dias / Purpose: To evaluate color, gloss, roughness and ultrastructural changes of enamel bleached with 35% hydrogen peroxide, subjected to previous treatment with deproteinized agent, or later treatment with remineralizing agent casein phosphopeptide-amorphous calcium phosphate (CPP-ACP). Materials and Methods: The experimental groups were: GC (control + in-office): 35% H2O2 - 4 sessions of 8 min; GE1(primer+in-office): 5.25% NaOCl during 1 min before the application of 35% H2O2 as done in GC, and GE2 (in-office+ACP-CPP): GC + ACP-CPP, daily applied during 7 days. Enamel and dentin blocks (n=8), obtained from bovine tooth, were used to evaluate color, gloss and roughness. Color changes (E), L* and b* parameters were done with a colorimeter and surface gloss with a glossimeter, before, immediately after (1h), 4 and 7 days after treatment. Roughness parameters, Ra, RT and Rsm, were done with a contact perfilometer before, immediately after and 7 days after treatments. ANOVA two-way and Tukeys test were performed to evaluate E, gloss and roughness separately (p=0.05). To access human pre-molar ultrastructural changes, teeth were cross-sectioned buccal-lingual and disto-mesio observed by scanning electron microscope, field emission gun, EDS to quantify chemical elements. Enamel three-dimensional images were analysed with microcomputed tomography (micro-CT) with resolution 11,24m (n=8). Structural parameters were analyzed: structural thickness (St.Th.), structural separation (St.Sp.) and fragmentation index (Fr.I.) before and after treatments in two regions of interest:ROI 1= 56,2m and ROI 2= 110,2 m, both from buccal surface. Paired t-test was done for analyses of each structural parameter. Results: There was no statistical difference among surface treatments to E, Ra and Rsm. Immediately after bleaching (1h) occured highest L* increase and decrease of surface gloss which remained until 7 days. Deproteinized agent applied on bovine tooth not emphasized enamel gloss reduction, but the CPP-ACP has resulted in a higher gloss reduction and roughness increase (Rt parameter) after 7 days. Deproteinized agent application previous to in- office bleaching observed a smooth surface, without structural parameters changes. There is a greater calcium quantity, forming a cover mantle after CPP-ACP application around enamel prisms, St.Th increase of 4,1m, less spacing between hydroxyapatite crystals and reductions of St.Sp of 0,8 m and Fr.I of 0,01 on ROI-1 after 7 days. Conclusion: Application of deproteinized agent does not change bovine enamel color, gloss and human enamel inorganic ultrastructure. CPP-ACP application after in-office bleaching does not contribute to color change, but decrease gloss of bovine enamel and change human enamel outermost ultrastructure portion after 7 days.

No description available.

<p>The overall goal of this dissertation is to optimize and evaluate the performance of the single photon emission computed tomography (SPECT) subsystem of a dedicated three-dimensional (3D) dual-modality breast imaging system for enhanced semi-automated, quantitative clinical imaging. This novel hybrid imaging system combines functional or molecular information obtained with a SPECT subsystem with high-resolution anatomical imaging obtained with a low dose x-ray Computed Tomography (CT) subsystem. In this new breast imaging paradigm, coined "mammotomography," the subject is imaged lying prone while the individual subsystems sweep 3-dimensionally about her uncompressed, pendant breast, providing patient comfort compared to traditional compression-based imaging modalities along with high fidelity and information rich images for the clinician. </p><p> System evaluation includes a direct comparison between dedicated 3D SPECT and dedicated 2D scintimammography imaging using the same high performance, semi-conductor gamma camera. Due to the greater positioning flexibility of the SPECT system gantry, under a wide range of measurement conditions, statistically significantly (p<0.05) more lesions and smaller lesion sizes were detected with dedicated breast SPECT than with compressed breast scintimammography. The importance of good energy resolution for uncompressed SPECT breast imaging was also investigated. Results clearly illustrate both visual and quantitative differences between the various energy windows, with energy windows slightly wider than the system resolution having the best image contrast and quality.</p><p> An observer-based contrast-detail study was performed in an effort to evaluate the limits of object detectability under various imaging conditions. The smallest object detail was observed using a 45-degree tilted trajectory acquisition. The complex 3D projected sine wave acquisition, however, had the most consistent combined intra and inter-observer results, making it potentially the best imaging approach for consistent clinical imaging.</p><p> Automatic ROR contouring is implemented using a dual-layer light curtain design, ensuring that an arbitrarily shaped breast is within ~1 cm of the camera face, but no closer than 0.5 cm at every projection angle of a scan. Autocontouring enables simplified routine scanning using complex 3D trajectories, and yields improved image quality. Absolute quantification capabilities are also integrated into the SPECT system, allowing the calculation of in vivo total lesion activity. Initial feasibility studies in controlled low noise experiments show promising results with total activity agreement within 10% of the dose calibrator values.</p><p> The SPECT system is integrated with a CT scanner for added diagnostic power. Initial human subject studies demonstrate the clinical potential of the hybrid SPECT-CT breast imaging system. The reconstructed SPECT-CT images illustrate the power of fusing functional SPECT information to localize lesions not easily seen in the anatomical CT images. Enhanced quantitative 3D SPECT-CT breast imaging, now with the ability to dynamically contour any sized breast, has high potential to improve detection, diagnosis, and characterization of breast cancer in upcoming larger-scale clinical testing.</p> / Dissertation

Objetivo: avaliar cor, brilho, rugosidade e alterações ultraestruturais do esmalte dental clareado com peróxido de hidrogênio a 35 %, submetido ao tratamento prévio com agente desproteinizante, ou ao tratamento posterior com o agente remineralizador fosforopeptídeo de caseína/fosfato de cálcio amorfo (ACP-CPP). Material e Métodos: Os grupos experimentais foram: GC (controle/consultório): H2O2 a 35 % - 4 sessões de 8 min; GE1 (primer+consultório): NaOCl 5,25 % por 1 min, aplicação do H2O2 a 35 % como no GC; e GE2 (consultório+ACP): GC + ACP-CPP diariamente por 7 dias. Fragmentos contendo esmalte e dentina (n=8), obtidos de dentes bovinos, foram utilizados para avaliar cor, brilho e a rugosidade. Alteração de cor (E), parâmetros L* e b* foram determinados com colorímetro e o brilho superficial com glossímetro antes, imediatamente após (1h), 4 e 7 dias após o tratamento. Parâmetros de rugosidades, Ra, Rt e RSm, foram obtidos com perfilômetro de contato antes, imediatamente após o tratamento e 7 dias após os tratamentos. Os resultados de E, brilho superficial e rugosidade foram avaliados separadamente usando ANOVA 2 fatores e teste de Tukey (p=0,05). Para avaliar a alteração ultraestrutural, dentes pré-molares humanos, seccionados nos sentidos vestibulo-lingual e mesio distal foram observados em microscópio eletrônico de varredura, por emissão de campo, e realizada a quantificação de elementos químicos por EDS. Análise tridimensional da estrutura do esmalte foi realizada por microtomografia computadorizada (micro-CT) com resolução 11,24 m (n=8). Foram realizadas análises dos parâmetros estruturais: espessura estrutural (St.Th.), separação estrutural (St.Sp.) e índice de fragmentação (Fr.I.) antes e após os tratamentos em duas regiões: ROI 1= 56,2 m e ROI 2= 110,2 m, ambas a partir da superfície vestibular. Foi utilizado o teste t pareado para análise estatística de cada parâmetro estrutural. Resultados: Não houve diferença estatística entre os diferentes tratamentos de superfície para E, Ra e RSm. Imediatamente após o clareamento (1h) ocorreu maior aumento do L* e queda do brilho superficial que se manteve por 7 dias. O uso de agente desproteinizante em dentes bovinos não acentuou a redução do brilho do esmalte, mas a aplicação de ACP-CPP acarretou em maior perda brilho e aumento nos valores de rugosidade após 7 dias para Rt. A aplicação do agente desproteinizante previamente ao clareamento em dente humano revelou uma superfície mais lisa, sem alterar os parâmetros estruturais. Há uma maior quantidade de cálcio, formação de um manto de recobrimento após aplicação de ACP-CPP em torno dos prismas de esmalte, aumento de St.Th de 4,1m, menor espaçamento entre os cristais de hidroxiapatita e redução de St.Sp em 0,8 m e de Fr.I em 0,01 no ROI-1 após 7 dias. Conclusão: O uso de agente desproteinizante não altera a cor, brilho e a ultraestrutura inorgânica. A aplicação de ACP-CPP após a técnica de clareamento de consultório não contribui para alteração de cor, mas reduz o brilho e altera a ultraestrutura da porção mais externa do esmalte após 7 dias / Purpose: To evaluate color, gloss, roughness and ultrastructural changes of enamel bleached with 35% hydrogen peroxide, subjected to previous treatment with deproteinized agent, or later treatment with remineralizing agent casein phosphopeptide-amorphous calcium phosphate (CPP-ACP). Materials and Methods: The experimental groups were: GC (control + in-office): 35% H2O2 - 4 sessions of 8 min; GE1(primer+in-office): 5.25% NaOCl during 1 min before the application of 35% H2O2 as done in GC, and GE2 (in-office+ACP-CPP): GC + ACP-CPP, daily applied during 7 days. Enamel and dentin blocks (n=8), obtained from bovine tooth, were used to evaluate color, gloss and roughness. Color changes (E), L* and b* parameters were done with a colorimeter and surface gloss with a glossimeter, before, immediately after (1h), 4 and 7 days after treatment. Roughness parameters, Ra, RT and Rsm, were done with a contact perfilometer before, immediately after and 7 days after treatments. ANOVA two-way and Tukeys test were performed to evaluate E, gloss and roughness separately (p=0.05). To access human pre-molar ultrastructural changes, teeth were cross-sectioned buccal-lingual and disto-mesio observed by scanning electron microscope, field emission gun, EDS to quantify chemical elements. Enamel three-dimensional images were analysed with microcomputed tomography (micro-CT) with resolution 11,24m (n=8). Structural parameters were analyzed: structural thickness (St.Th.), structural separation (St.Sp.) and fragmentation index (Fr.I.) before and after treatments in two regions of interest:ROI 1= 56,2m and ROI 2= 110,2 m, both from buccal surface. Paired t-test was done for analyses of each structural parameter. Results: There was no statistical difference among surface treatments to E, Ra and Rsm. Immediately after bleaching (1h) occured highest L* increase and decrease of surface gloss which remained until 7 days. Deproteinized agent applied on bovine tooth not emphasized enamel gloss reduction, but the CPP-ACP has resulted in a higher gloss reduction and roughness increase (Rt parameter) after 7 days. Deproteinized agent application previous to in- office bleaching observed a smooth surface, without structural parameters changes. There is a greater calcium quantity, forming a cover mantle after CPP-ACP application around enamel prisms, St.Th increase of 4,1m, less spacing between hydroxyapatite crystals and reductions of St.Sp of 0,8 m and Fr.I of 0,01 on ROI-1 after 7 days. Conclusion: Application of deproteinized agent does not change bovine enamel color, gloss and human enamel inorganic ultrastructure. CPP-ACP application after in-office bleaching does not contribute to color change, but decrease gloss of bovine enamel and change human enamel outermost ultrastructure portion after 7 days.

Detta dokument beskriver ett kandidatexamensarbete som genomförts av åtta civilingenjörsstudenter från Linköpings universitet. Examensarbetet bestod av att utveckla en webbapplikation för att möjliggöra navigation och visualisering av element ur den medicinska databasen SNOMED CT samt deras relationer. Den första delen av dokumentet består av gruppens gemensamma arbete och erfarenheter för att uppfylla kundens givna krav samt själva processen om hur det är att arbeta i ett större mjukvaruprojekt. Den andra delen består av studenternas individuella bidrag till examensarbetet som berör något spridda ämnen men som har en anknytning till mjukvaruutveckling och projektarbete.