Extraction, production, utilization and disposal of material resources have been undertaken continuously for much of human histories. Unavoidably, all of these activities have disturbed our environment, and subsequently have been harmful to humans and ecosystems in this and future generations. Due to time lag associated with both environment impact and the effects of measures taken to reduce this impact, existing approaches (i.e. monitoring and reacting) do not give sufficiently rapid feedback for effective environmental management. With regard to the complexity and concern related to environment-health chain effects, there is currently no environmental tool or approach that can provide comprehensive information and indicators covering all major environment and health themes, to enable decision makers to make informed judgements about regional policies and plans, relating to the sustainable use and disposal of material resources. Consequently, there is a need for developing a new approach by taking account of a multidisciplinary concept used in this thesis. Substance Flow Analysis (SFA) has been mainly applied in order to provide input information for Health Risk Assessment (HRA). The SFA approach provides the quantity of the substance that is transported (flows) and stored in the system (stock), and of which sub-system, flow, and process is the greatest concern. The HRA approach provides estimates of human health risk associated with site, activity and facility. An environmental fate and transport model is another key knowledge area incorporated into the HRA process. An integrating method of SFA, environmental fate and transport, and HRA is developed and illustrated by a case study of cadmium in Australia. This thesis shows that this new integration of existing stand-alone methods can provide holistic information and useful indicators covering all significant economic activities, environment, flows, and health risk assessment for selected substances. This enables better decision making on the use and disposal of substances at a range of levels in the economy, from corporations to regions and nations.

published_or_final_version / Civil Engineering / Doctoral / Doctor of Philosophy

Extraction, production, utilization and disposal of material resources have been undertaken continuously for much of human histories. Unavoidably, all of these activities have disturbed our environment, and subsequently have been harmful to humans and ecosystems in this and future generations. Due to time lag associated with both environment impact and the effects of measures taken to reduce this impact, existing approaches (i.e. monitoring and reacting) do not give sufficiently rapid feedback for effective environmental management. With regard to the complexity and concern related to environment-health chain effects, there is currently no environmental tool or approach that can provide comprehensive information and indicators covering all major environment and health themes, to enable decision makers to make informed judgements about regional policies and plans, relating to the sustainable use and disposal of material resources. Consequently, there is a need for developing a new approach by taking account of a multidisciplinary concept used in this thesis. Substance Flow Analysis (SFA) has been mainly applied in order to provide input information for Health Risk Assessment (HRA). The SFA approach provides the quantity of the substance that is transported (flows) and stored in the system (stock), and of which sub-system, flow, and process is the greatest concern. The HRA approach provides estimates of human health risk associated with site, activity and facility. An environmental fate and transport model is another key knowledge area incorporated into the HRA process. An integrating method of SFA, environmental fate and transport, and HRA is developed and illustrated by a case study of cadmium in Australia. This thesis shows that this new integration of existing stand-alone methods can provide holistic information and useful indicators covering all significant economic activities, environment, flows, and health risk assessment for selected substances. This enables better decision making on the use and disposal of substances at a range of levels in the economy, from corporations to regions and nations.

No description available.

The increasing pollution of the aquatic environment by cadmium is a potentially severe problem and techniques are needed to document the effect of the metal. To investigate the flux of this metal through a laboratory food chain, algae were grown in various cadmium concentrations for subsequent use as contaminated food for mussels. The results showed that in order to make valid deductions, more information about chemical mechanisms and background ecophysiological data is needed, otherwise accumulation reports may become misleading. It was found that the best growth and accumulation results were achieved by harvesting algae from a zinc deficient media containing 7 μmole dm-3 cadmium and at a particular life cycle phase. Two uptake mechanisms are proposed. These "contaminated" algae were fed to mussels under different accumulation regimes. The metal gain and loss were determined and compared to a "baseline" dry body weight which had been calculated from a shell length-body weight relationship. Cadmium accumulation took place in the mussels and after some initial delay, could be correlated to weight loss. Such a weight loss was due to pathological and biochemical changes in the mussels. It was shown that the toxic effect of cadmium could be determined much earlier by the presence of special proteins. The elutant profiles of the gel chromatography study showed the production of metal binding protein as well as a spill over of cadmium into the enzyme pool, caused by a higher uptake than elimination rate. Cadmium on metal binding protein and in the enzyme pool could be related to the poisoning effect of the metal and a pollution history for the mussels identified. The characteristics of the metal binding protein were found to be very similar to those reported for metallothionein and had an approximate molecular weight of 10 600 daltons.

No description available.

No description available.

Thesis (MSc)--University of Stellenbosch, 2006. / ENGLISH ABSTRACT: The development of potential genetically based resistance to cadmium (Cd) after long-term exposure to this metal at a sublethal concentration, was investigated in earthworm specimens belonging to the genus Eisenia. Adult (clitellate) earthworms from a long-term laboratory Cdexposed population (> 78 generations) and from other populations having no previous history of metal exposure were exposed to increasing concentrations (0; 2.5; 5; 10 and 20 mg/l) of Cd in the form of CdSO4. Different biomarkers and molecular markers were used to determine whether the specimens from the long-term Cd-exposed population had acclimatized or adapted to the metal contaminated environment. Acclimation was investigated at different physiological and biochemical levels using the following three biomarkers: the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay (MTT assay) measuring mitochondrial activity and cell viability; the single cell gel electrophoresis assay (comet assay) measuring DNA strand breaks and the biosynthesis of metallothioneins (MTs) that have the function of lowering metal toxicity. Earthworms from the long-term exposed substrate as well as specimens from populations not exposed to Cd were used. Adaptation was investigated by looking at both allozyme polymorphism at seven enzyme encoding loci and DNA polymorphism using chosen neutral and selectable genetic markers. The markers used were cytochrome c oxydase subunit I (COI) and metallothionein-2 (mt-2) respectively. This was done amongst the same pool of populations. Additionally, the DNA polymorphism study also aimed at genetically identifying the species utilized in this study thereby determining whether these earthworms belong to the species Eisenia fetida or Eisenia andrei. MTs biosynthesis did not generate the expected data mainly due to the fact that a suitable antibody could not be obtained (discussed in Chapter 5 section 5.3.3.). Similarly, the assessment of DNA polymorphism at the chosen selectable genetic marker mt-2 did provide information relevant to understanding the potential development of resistance to Cd in the long-term metal contaminated group. COI sequences generated in this study were compared to E. fetida and E. andrei COI sequences available on Genbank. Consequently, specimens used in this study were identified as possibly belonging to the species E. andrei. Allozyme polymorphism revealed no fixed genetic differences between the long-term Cd exposed laboratory culture and the rest of the populations. All the populations departed from Hardy-Weinberg equilibrium (χ2 > 5.9; p < 0.05), and showed a low mean heterozygosity per locus (Ho ≤ 0.21), probably due to inbreeding. Cell viability and proliferation as tested by the MTT assay revealed that coelomocytes, isolated from the long-term Cd-exposed group showed the highest viability (98.42%) compared to those from other groups (+/- 80%). Kruskal-Wallis ANOVA (H2, 225=109.7165 p < 0.001) revealed that the long-term Cd-exposed laboratory culture showed a better response to acute exposure to Cd, thus demonstrating that these worms have developed some kind of tolerance to Cd. Similarly, the comet assay showed that in the long-term Cd-exposed specimens, less DNA breaks occurred after Cd exposure than in the unexposed groups. Of all the comet parameters assessed in this study (comet tail length, tail moment and tail DNA percentage), tail DNA percentage seemed to be more sensitive although all three parameters indicated that long-term Cd-exposed specimens were more resistant than unexposed specimens as shown by the number of single strand DNA breaks induced by exposure to higher concentrations of Cd (p < 0.001). The comet and the MTT assays indicated that the earthworms with a previous history of Cd exposure have developed increased fitness towards higher doses of Cd, compared to previously unexposed groups. These findings mainly proved that several mechanisms could come into play at the physiological and biochemical level to allow the Cd exposed population to acclimatize to its chemically stressful environment. Clear genetic support for the differences found between the tested populations was not obtained, but needs to be investigated further using Cd selectable markers such as the mt-2 gene, in order to come to a more conclusive deduction. / AFRIKAANSE OPSOMMING: Die moontlike ontwikkeling van geneties gebaseerde weerstand teen kadmium (Cd) by erdwurms van die genus Eisenia, na langtermyn blootstelling aan die metaal by 'n subletale konsentrasie, is ondersoek. Volwasse (klitellate) erdwurms van 'n langtermyn laboratorium Cdblootgestelde bevolking (< 78 generasies) asook van ander bevolkings met geen voorgeskiedenis van metaal blootstelling nie, is blootgestel aan 'n reeks van Cd konsentrasies (0; 2.5; 5; 10; en 20 mg/l) in die vorm van CdSO4. Verskillende biomerkers en molekulêre merkers is gebruik om vas te stel of die erdwurms geakklimeer of aangepas het by die metaal in die gekontamineerde omgewing. Akklimasie is op verskillende fisiologiese en biochemiese vlakke getoets deur die volgende drie biomerkers te gebruik: Die 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromied toets (MTT toets), wat mitochondriale aktiwiteit en sel lewensvatbaarheid meet; die enkel sel elektroforese toets (Komeettoets) wat DNS string breuke meet; die biosintese van metallotioniene (MT's) wat metaalvergiftiging verlaag. Erdwurms van die langtermyn blootstellingsubstraat asook eksemplare van bevolkings wat nie aan kadmium blootgestel was nie, is gebruik. Aanpassing is ondersoek deur gebruik te maak van allosiem polimorfisme, waar 7 ensiem koderende lokusse gebruik is asook van DNS polimorfisme deur neutrale genetiese merkers te selekteer. Die merkers wat gebruik is, was sitochroom c oksidase, subeenheid I (COI) en metallotionien-2 (mt-2) respektiwelik. Hierdie toetse is met dieselfde groepe bevolkings uitgevoer. 'n Bykomende van die studie aspek waar ook van DNS polimorfisme gebruik gemaak is, was daarop gemik om die spesie wat vir die huidige studie gebruik is, geneties te identifiseer en om vas te stel of die erdwurms aan die spesie Eisenia fetida of Eisenia andrei behoort. Die MT biosintese het nie die verwagte data gegenereer nie, hoofsaaklik weens die feit dat geskikte teenligaampies nie beskikbaar was nie (bespreek in Hoofstuk 5 afdeling 5.3.3). Soortgelyk, het die waardebepaling van DNS polimorfisme by die geselekteerde genetiese merker mt-2 nie genoegsame informasie verskaf om die potensiaal van die ontwikkeling van weerstand teen Cd in die langtermyn blootgestelde groep te verstaan nie. COI geenvolgordes van E. fetida en E. andrei wat op Genbank beskikbaar was, is gebruik om met die resultate van die huidige studie te vergelyk. Die spesie wat tydens die huidige studie gebruik is, is op hierdie wyse geïdentifiseer as E. andrei. Allosiem polimorfisme het geen vaste genetiese verskille tussen die langtermyn blootgestelde laboratoriumkulture en die ander bevolkings getoon nie. Al die bevolkings het verskil van die Hardy-Weinberg ewewigstoestand (χ2 > 5.9; p < 0.05) en het 'n lae heterosigositeit per lokus getoon (Ho ≤ 0.21), moontlik as gevolg van inteling. Sellewensvatbaarheid en proliferasie soos getoets met die MTT toets, het getoon dat selomosiete, geïsoleer vanuit die langtermyn Cd blootgestelde groep, die hoogste lewensvatbaarheid (98.42%) gehad het in vergelyking met die ander groepe (+/- 80%). Kruksal-Wallis ANOVA (H2, 225=109.7165 p < 0.001) het getoon dat die langtermyn Cd blootgestelde laboratoriumkultuur 'n beter respons vir akute blootstelling aan Cd gehad het. Hierdeur is gedemonstreer dat hierdie wurms 'n soort toleransie teenoor kadmium ontwikkel het. Soortgelyk het die komeettoets aangetoon dat daar in die langtermyn blootgestelde eksemplare minder DNS breuke voorgekom het na verdere blootstelling aan Cd as in die ander groepe. Van al die komeet parameters wat tydens die studie gemeet is (komeet stertlengte, Olive stert moment en stert DNS persentasie), het die stert DNS persentasie geblyk om die mees sensitiefste te wees, alhoewel al drie parameters aangetoon het dat die langtermyn Cd blootgestelde eksemplare meer weerstandbiedend was teen induksie van DNS enkelstring breuke weens Cd blootstelling (p < 0.001), as die wat nie voorheen blootgestel was nie. Die komeet en MTT toetse het aangetoon dat erdwurms met 'n voorgeskiedenis van Cd blootstelling 'n toenemende fiksheid teen hoër dososse van Cd ontwikkel het as die wat nie voorheen aan kadmium blootgestel was nie. My bevindings kon hoofsaaklik toon dat verskeie meganismes op die fisiologiese en biochemiese vlak 'n rol sou kon speel om Cd blootgestelde bevolkings by 'n chemies stresvolle omgewing te laat akklimeer. Duidelike ondersteuning vir die verskille tussen die getoetsde bevolkings deur van Cd geselekteerde merkers soos die mt-2 geen gebruik te maak om 'n meer finale afleiding te kan maak is nie verkry nie en behoort verder ondersoek te word.

Bibliography: leaves 202-223.

The technological development and application of waste-to-resource strategy is significantly critical and crucial in both environmental and manufacturing industries, via which we do not only provide practical treatments to toxic waste materials but also translate them into usable products. It has been considered as a preferred method which should be applied in future wastewater treatment strategies. In this study, we investigated the process of incorporating cadmium oxide and nickel oxide into ceramic-based materials with the phases of CdAl4O7, and CdFe2O4. Such products are of less harmful effect to the natural environment and can also be of beneficial use with their good mechanical properties identified by nano-indentation. We proved the possibility and provided an opportunity to convert the waste from wastewater treatment process to a new material resource. XRD is preferred for characterizing solid mixtures to determine the relative abundances of crystalline phases during the reaction process. As a result, we can obtain the relative abundance information on the growth of the crystalline products, such as CdAl4O7, and CdFe2O4 according to the change of fabrication temperatures. In that case, the starting reaction temperature and the optimized temperature (at which the completed reaction could be achieved) could be revealed. In Cd-Al system, the starting temperature for CdAl4O7 formation is 900 °C, and the optimized formation temperature is around 1020 °C. On the other hand, for Cd-Fe system, such temperatures are of 700 °C and 850 °C correspondingly. In our research, it is shown that the ceramic-process is an effective strategy to stabilize the waste hazardous metals (cadmium and nickel) by materials such as aluminate, ferrite, and kaolin commonly used in ceramic industry. Through this method, the difficult-to-treat wasted metals would become reusable and applied in building and infrastructure projects. Products containing CdAl4O7, CdFe2O4 and NiAl2O4 have shown higher resistance to acidic leaching, comparing to CdO and NiO used as the starting materials to simulate the waste metal forms discharged from the industrial stream. Furthermore, similar measurements by alkaline attack on the sintered products (NiAl2O4 containing samples) were also studied. Besides the investigation to leaching behavior, the mechanical properties are also measured by nano-indentation in our work. The incorporation of metal waste into the fabrication of ceramic products is valuable due to the preferred stabilization mechanisms of crystal structures and the large volume of ceramic products needed by the construction industry. Furthermore, because the product safety and functionality should not be compromised, a fundamental understanding of the surface properties of metal containing phases should be further established, rather than relying solely on data from regulatory tests on bulk samples. Therefore, the results of this study demonstrate the superior mechanical properties of nickel spinel containing products, comparing to the cristobalite silica matrix, under severe acid attack. / published_or_final_version / Civil Engineering / Master / Master of Philosophy