Thesis (Ph. D.)--University of Wisconsin--Madison, 1963. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 114-117).

Thesis (Ph. D.)--University of Wisconsin--Madison, 1966. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.

Reaction progress kinetic analysis (RPKA) is a powerful tool for determining kinetic parameters of catalytic reactions. Many of the published articles that have used RPKA have employed reaction calorimetry for obtaining sufficient data to be reliable. The use of gas uptake measurements, in place of calorimetry is explored in this Thesis. Chapter 2 details the use of gas uptake measurements in establishing the order with respect to substrate and gas for the rhodium catalysed hydrogenation of 1-octene. Previous studies have used initial rate measurements to establish these orders and the reaction cycle is well known. The use of RPKA allows the same information to be established in two reactions. Chapter 3 focuses on the rhodium catalysed hydroformylation of 1-octene as it involves the reaction of one substrate with two gases. Using RPKA it is possible to determine the order in substrate and the overall order in gas, but it was found difficult to determine the order with respect to the individual gases using RPKA alone. Chapter 4 shows the palladium catalysed methoxycarbonylation of vinyl acetate. The reaction has two substrate concentrations changing simultaneously as well as a gas. This chapter shows that by careful design of experiments the orders with respect to each of these substrates and CO can be determined in minimal numbers of experiments. Chapter 5 focuses on the methoxycarbonylation of alkynes, which uses RPKA in complex multistep reactions, to establish if RPKA can be used to determine the kinetics with respect to the individual reacting components for each step. This study focuses on the methoxycarbonylation of phenylacetylene to produce methyl cinnamate as well as the methoxycarbonylation of both terminal and internal linear alkynes. These linear alkynes carbonylate to produce an α,β-unsaturated ester. The double bond is isomerised from its conjugated position along the chain to the terminal position where it is trapped and carbonylated to produce an α,ω-dieter product.

Thesis (Ph. D.)--University of Wisconsin--Madison, 1961. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 250-256).

Thesis (M.E.)--University of Adelaide, Dept. of Chemical Engineering, 1988. / Includes summary. Includes bibliographical references.

Asymmetric phase-transfer catalysis is a powerful technique that enables a wide range of transformations under mild conditions, often using inexpensive and environmentally benign reagents. By extending the applications of phase-transfer catalysis we have developed a highly diastereo- and enantioselective synthesis of functionalized indolines bearing two contiguous stereocentres, one of which is quaternary and all carbon, in a single synthetic step. The reaction proceeds with complete diastereoselectivity and with high levels of enantioselectivity (up to 99% ee). Despite the development of phase-transfer catalysis as a primary synthetic tool in organic synthesis, the mechanistic understanding of these reactions still remains a challenge, due mainly to the difficulty of studying the complex multi-phase systems. Therefore, a further aim of this project was to understand the reaction mechanism of our phase-transfer catalysed transformation. Investigations into the mechanism of our phase-transfer catalysed reaction have been carried out by studying the reaction kinetics. These have shown that the reaction follows a sigmoidal curve with an induction period present. A detailed kinetic investigation was carried out which demonstrated that an autocatalytic mechanism is operational.

Effects of aqueous surfactant solutions upon cis/trans isomerization reactions of various N-alkyl-merocyanine dyes (II) were studied. Dramatic rate enhancements were found for all dyes in CTAB and SDS solutions above the CMC. CTAB solutions showed the greatest effect with some dye isomerizations catalyzed in excess of 1000-fold. Increases in either CTAB concentration or dye isomerization rates. N-methyl through N-pentyl dye isomerization rates were measured as a function of CTAB concentration and the data treated according to the pseudophase model for micellar catalysis. KS values ranged from 198 to 2000 M-1 for N-methyl to N-pentyl dyes, respectively. Micellar rate constants also increased as dye hydrophobicity was increased. Thermodynamic activation parameters were determined for N-methyl through N-hexylmerocyanine dyes in CTAB solutions. Rate enhancements in CTAB (above the CMC) relative to those in purely aqueous solutions were shown to be due to a substantial lowering of ΔH‡, for the various dyes. Increased CTAB concentrations of N-methyl dye solutions gave reaction rate increases resulting from a lowering of ΔS‡. In 0.054 M CTAB, increases in reaction rates with increased N-alkyl chain length were due to large increases ΔS‡ (from ca. 0 eu for N-methyl to 13 eu for N-hexyl). The data were discussed in terms of molecular interactions which can occur within the micellar solubilization sites.

The initiation and high resolution control of surface confined chemical reactions would be both beneficial for nanofabrication and fundamentally interesting. In this work, spatially controlled scanning probe directed organometallic coupling, patterned functional protein immobilisation and highly localised reversible redox reactions on SAMs were investigated. Catalytically active palladium nanoparticles were mounted on a scanning probe and an appropriate reagent SAM was scanned in a reagent solution. This instigated a spatially resolved organometallic coupling reaction between the solution and SAM-phase reagents. Within this catalytic nanolithography a spatial resolution of ~10nm is possible, equating to zeptomole-scale reaction. The methodology was applied to reactions such as Sonogashira coupling and local oligo(phenylene vinylene) synthesis. By altering the experimental protocols, relating probe scan velocity to reaction yield and characterising the nanopattern, a PVP matrix model describing a proposed mechanism of catalytic nanolithography, was presented. Though ultimately limited by probe deactivation, calculations indicated that activity per immobilised nanoparticle is very high in this configuration. For biopatterning, surface nanopatterns defined by carboxylic functionality were generated from methyl-terminated SAMs by local anodic oxidation (LAO) initiated by a conductive AFM probe. By employing suitable linker compounds, avidin and Stefin-A quadruple Mutant (SQM) receptive peptide aptamers were patterned at sub-100nm resolution. The multiplexed sensing capability of an SQM array was demonstrated by reacting generated patterns with single or a mixture of multiple antibodies. The reversible redox conversion and switching of reactivity of hydroquinone-terminated SAMs was electrochemically demonstrated prior to an application in redox nanolithography. In this methodology, spatially controlled probe-induced in situ "writing" and "erasing" based on reversible redox conversion were conducted on hydroquinone terminated SAM. In combination with dip-pen nanolithography, a novel method of redox electro-pen nanolithography was designed and the method’s application for lithography was examined.

Electrochemistry is the science of electron transfer. The subject is of great importance and appeal because detailed information can be obtained using relatively simple experimental techniques. In general, the raw data is sufficiently complicated to preclude direct interpretation, yet is readily rationalised using numerical procedures. Computational analysis is therefore central to electrochemistry and is the main topic of this thesis. Chapters 1 and 2 provide an introductory account to electrochemistry and numerical analysis respectively. Chapter 1 explains the origin of the potential difference and describes its relevance to the thermodynamic and kinetic properties of a redox process. Voltammetry is introduced as an experimental means of studying electrode dynamics. Chapter 2 explains the numerical methods used in later chapters. Chapter 3 presents a review of the use of nanoparticles in electrochemistry. Chapter 4 presents the simulation of a random array of spherical nanoparticles. Conclusions obtained theoretically are experimentally confirmed using the Cr³⁺/Cr²⁺ redox couple on a random array of silver nanoparticles. Chapter 5 presents an investigation into the concentration of supporting electrolyte required to make a voltammetric experiment quantitatively diffusional. This study looks at a wide range of experimental conditions. Chapter 6 presents an investigation into the deliberate addition of insufficient supporting electrolyte to an electrochemical experiment. It is shown that this technique can be used to fully study a stepwise two electron transfer. Conclusions obtained theoretically are experimentally confirmed using the reduction of anthracene in acetonitrile. Chapter 7 presents a new method for simulating voltammetry at disc shaped electrodes in the presence of insufficient supporting electrolyte. It is shown that, under certain conditions, the results obtained from this complicated simulation can be quantitatively obtained by means of a much simpler ‘hemispherical approximation’. Conclusions obtained theoretically are experimentally confirmed using the hexammineruthenium ([Ru(NH₃)₆]³⁺/[Ru(NH₃)₆]²⁺) and hexachloroiridate ([IrCl₆]²⁻/[IrCl₆]³⁻) redox couples. Chapter 8 presents an investigation into the voltammetry of stepwise two electron processes using ionic liquids as solvents. It is shown that these solvents can be used to fully study a stepwise two electron transfer. Conclusions obtained theoretically are experimentally confirmed using the oxidation of N,N-dimethyl-p-phenylenediamine in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄ mim][BF₄]). The work presented in this thesis has been published as 7 scientific papers.

This thesis presents the development and redesign of a commercial electrochemical quartz crystal microbalance with dissipation (E–QCM–D). This was used to study factors affecting the efficiency of the four electron reduction catalysed by the fuel cell enzyme bilirubin oxidase from Myrothecium verrucaria immobilised on thiol modified gold surfaces. Within this thesis, the E–QCM–D was used to show that application of a constant potential to bilirubin oxidase adsorbed to thiol-modified gold surfaces causes activity loss that can be attributed to a change in structural arrangement. Varying the load by potential cycling distorts the enzyme by inducing rapid mass loss and denaturation. Attaching the enzyme covalently reduces the mass loss caused by potential cycling but does not mitigate activity loss. Covalent attachment also changes the orientation of the surface bound enzyme as verified by the position of the catalytic wave (related to the overpotential for catalysis) and reactive labelling followed by mass spectrometry analysis. The E–QCM–D was used to show how electrostatic interactions affect enzyme conformation where high pH causes a reduction in both mass loading at the electrode and a reduction in activity. At pH lower than the enzyme isoelectric point, there is a build up of multilayers in a clustered adsorption. When enzyme adsorbs to hydrophobic surfaces there is a rapid denaturation which completely inactivates the enzyme. Changing the surface chemistry from carboxyl groups to hydroxyl and acetamido groups shows that catalysis is shifted to more negative potentials as a result of an enzyme misorientation. Further to this, increasing the chain length of the thiol modifier indicates that an increased distance between surface and enzyme reduces activity, enzyme loading and results in a conformational rearrangement that permits electron transfer over longer distances.