<p>This report is the result of a Master Thesis work that has been performed between October 2003 and March 2004. The purpose of the work was to evaluate a part of the signal chain in a product of Micronic Laser Systems AB. The evaluation was performed to obtain the characterisation for the signal chain, such as impedances and crosstalk. </p><p>The work started with a literature study in order to refresh and increase the knowledge that was needed before the practical work. Then measurements, computer aided simulations and comparisons between these were performed. </p><p>Measurements were performed using TDR (Time Domain Reflectometry). The results showed the impedance levels along the signal chain. This was interesting since it showed how well the different parts in the system are matched. Unmatched parts result in reflections that disturb the transmitted signal and contribute to crosstalk, which also was measured. </p><p>Simulations were done using ADS (Advance Design System), a tool from Agilent Technologies Inc. A substantial part of the simulation work was to build models of the real system. These models have been used for simulation. The simulation results were then compared to the measurement results. </p><p>The results show that the system can be better matched concerning the channel impedance. There are large variations in impedance levels along the signal chain, resulting in signal reflections. Another effect studied is crosstalk between channels. Measurements and simulations showed the presence of crosstalk but it seems to be a minor problem in the current machine.</p>

This report is the result of a Master Thesis work that has been performed between October 2003 and March 2004. The purpose of the work was to evaluate a part of the signal chain in a product of Micronic Laser Systems AB. The evaluation was performed to obtain the characterisation for the signal chain, such as impedances and crosstalk. The work started with a literature study in order to refresh and increase the knowledge that was needed before the practical work. Then measurements, computer aided simulations and comparisons between these were performed. Measurements were performed using TDR (Time Domain Reflectometry). The results showed the impedance levels along the signal chain. This was interesting since it showed how well the different parts in the system are matched. Unmatched parts result in reflections that disturb the transmitted signal and contribute to crosstalk, which also was measured. Simulations were done using ADS (Advance Design System), a tool from Agilent Technologies Inc. A substantial part of the simulation work was to build models of the real system. These models have been used for simulation. The simulation results were then compared to the measurement results. The results show that the system can be better matched concerning the channel impedance. There are large variations in impedance levels along the signal chain, resulting in signal reflections. Another effect studied is crosstalk between channels. Measurements and simulations showed the presence of crosstalk but it seems to be a minor problem in the current machine.