Doctor of Philosophy / Department of Chemical Engineering / Jennifer L. Anthony / Zeolites and zeolite-like materials have well-ordered structures and pores creating varying capacities for molecules based upon size, functional groups, polarity, and intermolecular forces making the materials useful for molecular sensing as well for molecules that are considered hazardous at very low concentrations with reproducible results because of these properties. This study will identify and characterize applications for zeolite and zeolite-like materials in gas and liquid phases based upon the dominating physical and chemical properties of the materials. The properties of interest include liquid phase ion exchange capacities, selectivities, gas/vapor phase adsorption capacity, and initial adsorption uptake rate. Zincosilicates have similar framework structures to aluminosilicate zeolites; however, they have distinct advantages over traditional zeolites. Zincosilicates typically have a higher ion density, lack “cages” in their structure which leads to all the cations being accessible for ion exchange, and have the ability to form three-membered rings which lead to large void spaces in their structure. These features lead to high capture capacities for divalent heavy metal mercury ions. In this work, the potential to use zincosilicates as ion exchangers such as VPI-7, VPI-9 and VPI-10 is presented. Results have shown that zincosilicates have capture capacities greater than traditional zeolites, even greater than those that have been synthesized with functional groups intended to increase metal sorption capacities. The selectivity coefficients in a binary ion exchange system were successfully modeled using the Gibbs-Donnan selectivity model. The selectivities for the zincosilicates were Pb>Na>Hg>K>Ca. Zeolites are also able to adsorb chemical species and therefore can be used as the recognition element in sensing devices. The sorption capacity of 2-chloroethyl ethyl sulfide, dimethyl methanephosphonate, ethanol, and n-butanethiol were examined with zeolites 13X, 4A, MCM-41, VPI-7, VPI-9, and ZSM-5. The zeolites selected provided very different framework composition, countercation, and surface area features for determining the most significant properties in adsorption. Zeolite 13X had the highest equilibrium and initial uptake rate for most compounds tested, whereas the low surface area zincosilicates, VPI-7 and VPI-9, had the lowest capacity. Based on these results, a piezoelectric device with an array of zeolites can be successfully employed as a sensor.

abstract: As experiencing hot months and thermal stresses is becoming more common, chemically protective fabrics must adapt and provide protections while reducing the heat stress to the body. These concerns affect first responders, warfighters, and workers regularly surrounded by hazardous chemical agents. While adapting traditional garments with cooling devices provides one route to mitigate this issue, these cooling methods add bulk, are time limited, and may not be applicable in locations without logistical support. Here I take inspiration from nature to guide the development of smart fabrics that have high breathability, but self-seal on exposure to target chemical(s), providing a better balance between cooling and protection. Natural barrier materials were explored as a guide, focusing specifically on prickly pear cacti. These cacti have a natural waxy barrier that provides protection from dehydration and physically changes shape to modify surface wettability and water vapor transport. The results of this study provided a basis for a shape changing polymer to be used to respond directly to hazardous chemicals, swelling to contain the agent. To create a stimuli responsive material, a novel superabsorbent polymer was synthesized, based on acrylamide chemistry. The polymer was tested for swelling properties in a wide range of organic liquids and found to highly swell in moderately polar organic liquids. To help predict swelling in untested liquids, the swelling of multiple test liquids were compared with their thermodynamic properties to observe trends. As the smart fabric needs to remain breathable to allow evaporative cooling, while retaining functionality when soaked with sweat, absorption of water, as well as that of an absorbing liquid in the presence of water were tested. Micron sized particles of the developed polymer were deposited on a plastic mesh with pore size and open area similar to common clothing fabric to establish the proof of concept of using a breathable barrier to provide chemical protection. The polymer coated mesh showed minimal additional resistance to water vapor transport, relative to the mesh alone, but blocked more than 99% of a xylene aerosol from penetrating the barrier. / Dissertation/Thesis / Doctoral Dissertation Chemical Engineering 2020

Developing a fundamental understanding of the interactions of chemical warfare agents (CWAs) with surfaces is essential for the rational design of new sorbents, sensors, and decontamination strategies. The interactions of chemical warfare agent simulants, molecules which retain many of the same chemical or physical properties of the agent without the toxic effects, with amorphous silica were conducted to investigate how small changes in chemical structure affect the overall chemistry. Experiments investigating the surface chemistry of two classes of CWAs, nerve and blister agents, were performed in ultrahigh vacuum to provide a well-characterized system in the absence of background gases. Transmission infrared spectroscopy and temperature-programmed desorption techniques were used to learn about the adsorption mechanism and to measure the activation energy for desorption for each of the simulant studied. In the organophosphate series, the simulants diisopropyl methylphosphonate (DIMP), dimethyl methylphosphonate (DMMP), trimethyl phosphate (TMP), dimethyl chlorophosphate (DMCP), and methyl dichlorophosphate (MDCP) were all observed to interact with the silica surface through the formation of a hydrogen bond between the phosphoryl oxygen of the simulant and an isolated hydroxyl group on the surface. In the limit of zero coverage, and after defect effects were excluded, the activation energies for desorption were measured to be 57.9 ± 1, 54.5 ± 0.3, 52.4 ± 0.6, 48.4 ± 1, and 43.0 ± 0.8 kJ/mol for DIMP. DMMP, TMP, DMCP, and MDCP respectively. The adsorption strength was linearly correlated to the magnitude of the frequency shift of the ν(SiO-H) mode upon simulant adsorption. The interaction strength was also linearly correlated to the calculated negative charge on the phosphoryl oxygen, which is affected by the combined inductive effects of the simulants' different substituents. From the structure-function relationship provided by the simulant studies, the CWA, Sarin is predicted to adsorb to isolated hydroxyl groups of the silica surface via the phosphoryl oxygen with a strength of 53 kJ/mol. The interactions of two common mustard simulants, 2-chloroethyl ethyl sulfide (2-CEES) and methyl salicylate (MeS), with amorphous silica were also studied. 2-CEES was observed to adsorb to form two different types of hydrogen bonds with isolated hydroxyl groups, one via the S moiety and another via the Cl moiety. The desorption energy depends strongly on the simulant coverage, suggesting that each 2-CEES adsorbate forms two hydrogen bonds. MeS interacts with the surface via a single hydrogen bond through either its hydroxyl or carbonyl functionality. While the simulant work has allowed us to make predictions agent-surface interactions, actual experiments with the live agents need to be conducted to fully understand this chemistry. To this end, a new surface science instrument specifically designed for agent-surface experiments has been developed, constructed, and tested. The instrument, located at Edgewood Chemical Biological Center, now makes it possible to make direct comparisons between simulants and agents that will aid in choosing which simulants best model live agent chemistry for a given system. These fundamental studies will also contribute to the development of new agent detection and decontamination strategies. / Ph. D.

Indiana University-Purdue University Indianapolis (IUPUI) / Paper spray is an ambient ionization technique for mass spectrometry that is well-known for its ability to accomplish rapid and sensitive analyses without any need for sample preparation. This work further develops the technique in two major areas: negative ionization and drug screening. Negative ionization has always been an obstacle to electrospray-based ion sources because of its vulnerability to corona discharge, but methods are presented here to both quantify and suppress this electrical phenomenon, thus preventing it from interfering with qualitative/quantitative analyses. The validity of the discharge-suppressing method is demonstrated for both a simple screen of barbiturates and other acidic drugs (Chapter 2) and the detection and quantitation of chemical warfare agent hydrolysis products (Chapter 3). Additionally, a positive ion drug screen is applied to the analysis of postmortem blood samples (Chapter 4), achieving rapid and effective screening of 137 different drugs ranging from pharmaceuticals to drugs of abuse. The performance of this screen is also evaluated by comparing the results of the postmortem samples to those obtained using a more established series of assays. The research contained herein presents strides toward forensic application of paper spray mass spectrometry, especially in disciplines related to forensic toxicology.

The reactivity of chemical warfare agents (CWAs) and CWA simulants on organic and oxide surfaces is not currently well understood, but is of substantial importance to the development of effective sensors, filters and sorbent materials. Polyurethane coatings are used by the armed forces as chemical agent resistive paints to limit the uptake of CWAs on surfaces, while the use of metal oxides has been explored for decontamination and protection purposes. To better understand the chemical nature of the interactions of organophosphonate simulants with these surfaces, an ultra-high vacuum environment was used to isolate the target interactions from environmental gaseous interferences. The use of highly-characterized surfaces, coupled with molecular beam and dosing capabilities, allows for the elucidation of adsorption, desorption, and reaction mechanisms of CWA simulants on a variety of materials. Model urethane-containing organic coatings were designed and applied toward the creation of well-ordered thin films containing carbamate linkages. In addition, novel trisilanolphenyl-polyhedral oligomeric silsesquioxane (POSS) molecules were used to create Langmuir-Blodgett films containing reactive silanol groups that have potential use as sensors and coatings. The uptake and reactivity of organophosphonates and chlorophosphates on these surfaces is the focus of this study. Surfaces were characterized before and after exposure to the phosphates using a number of surface sensitive techniques including: contact angle goniometry, reflection-absorption infrared spectroscopy (RAIRS), X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD) measurements. In conjunction with surface probes, uptake coefficients were monitored according to the King and Wells direct reflection technique. The integration of these analytical techniques provides insight and direction towards the design of more effective chemical agent resistant coatings and aids in the development of more functional strategies for chemical warfare agent decontamination and sensing. / Ph. D.

Reflection absorption infrared spectroscopy was used as the primary analysis technique to study the interfacial chemistry of surfaces relevant to chemical and biological warfare agent defense. Many strategies utilized by the military to detect and decompose chemical and biological warfare agents involve their interaction with surfaces. However, much of the chemistry that occurs at the interface between the agents and surfaces of interest remains unknown. The surface chemistry plays an important role in efficacy of both detection and decontamination technology, and by obtaining a deeper understanding of that chemistry, researchers might be able to develop more sensitive detection devices and more effective decontamination strategies. Our efforts have focused on three different areas of surface chemistry relevant to chemical and biological warfare agent defense: 1) The development of a surface synthesis strategy to create and control the structure of antibacterial self-assembled monolayers (SAMs). Our work demonstrated a successful strategy for creating SAMs that contain long-chain quaternary ammonium groups, which were synthesized and subsequently characterized using RAIRS and X-ray photoelectron spectroscopy (XPS). 2) The determination of the surface conformation, orientation, and relative surface density of immobilized antimicrobial peptides. Our results revealed that the peptides consisted of tilted (50-60°), α-helices on the surface, regardless of solution conditions. 3) The design and construction of a new ultrahigh vacuum surface science instrument that allows for the study of gas-surface reactions with up to three gases simultaneously. 4) The study of the adsorption of chemical warfare agent simulants to silica nanoparticulate films. Our work demonstrated that the adsorbate structure was dependent on the number of hydrogen-bonding groups, and the adsorption consists of a pressure-dependent two part mechanism. The results presented here will help increase the understanding of the surface chemistry of three interfaces relevant to chemical and biological defense. Future researchers may apply the new information to develop more effective detection and decontamination strategies for chemical and biological warfare agents. / Ph. D.

The targeted design of new catalyst materials can only be accomplished once a fundamental understanding of the interactions between material surfaces and adsorbed molecules is developed. In situ infrared spectroscopy and mass spectrometry methods were employed to probe interactions at the gas-surface interface of oxide-supported metal nanoparticle materials. High vacuum conditions allowed for systematic investigations to describe detailed reaction mechanisms. Specifically, variable temperature infrared spectroscopy was utilized to uncover the binding energetics of CO to the oxide surface of TiO2-based materials. As binding energetics are related to the electronic structure of the adsorption site, differences in evaluated binding enthalpies are hypothesized to probe electronic metal-support interactions that describe charge transfer between the supported metal nanoparticles and TiO2. Cu/TiO2 aerogels were identified as a candidate for more in-depth studies. Flow reactor methods in combination with the surface-based infrared spectroscopy were utilized to elucidate the CO oxidation reaction mechanism over Cu/TiO2 aerogels. Bridging oxygen atoms on TiO2 regions of the material were identified as the active site for catalysis in a Cu-assisted Mars-van Krevelen lattice extraction mechanism. Methanol oxidation was then studied with similar methods to show the complete conversion to CO2 and H2O at high temperatures through the reduction of titania and formation of a formate intermediate. Higher-order carbonaceous alcohols were probed for adsorption and reactivity on Cu/TiO2 aerogels and were observed to follow a similar reaction pathway. The higher-order alcohols, however, were shown to undergo a partial oxidation pathway in the absence of gaseous O2 that is hypothesized to originate from enhanced binding to Cu sites. The decomposition of the chemical warfare agent simulant dimethyl chlorophosphate was also investigated. A hydrolysis pathway to form the significantly less toxic molecule CH3Cl was observed, highlighting the unique promotional effects and chemistry on Cu/TiO2 aerogels. The results presented exemplify both the influence of electronic metal-support interactions on catalysis and the versatile reactivity of Cu/TiO2 aerogels. / Doctor of Philosophy / Interactions between small gaseous molecules and material surfaces have very important implications for applications regarding the environment, industry, and military/public safety. The mechanisms in which gases interact with a solid surface can determine how the material can be functionally used as catalysts. Scientists and engineers start to build a fundamental understanding of what makes a catalyst successful for different applications by understanding the location and strength of interactions. A catalyst's surface acts to lower activation barriers and provide low-energy pathways for interacting molecules to chemically change, by breaking bonds for molecular decomposition and/or forming new bonds. The vibrations of chemical bonds that break and form on surfaces are probed with infrared spectroscopy at the gas-surface interface to study molecular adsorption and reactivity. In addition, a flow cell reactor is used to characterize reaction progress and identify products in real-time. A class of reactive nanoparticulate materials is utilized as a model system on which to study various chemical reactions for important applications including small molecule oxidation for industrial detoxification and clean energy applications, as well as the decomposition of chemical warfare agents. Reaction mechanisms for the oxidation of carbon monoxide and alcohols were elucidated through the utilization of the methods described above. In addition, the decomposition of a chemical warfare agent simulant is characterized. The discoveries and understanding of important chemical properties presented in this dissertation will aid in the synthesis of effective next-generation catalyst materials.

The advancements of chemists, engineers, and material scientists has yielded an enormous and diverse library of high-performance materials with varying chemical and physical properties that can be used in a wide array of applications. A molecular-level understanding of the nature of gas–surface interactions is critical to the development of next generation materials for applications such as gas storage and separation, chemical sensing, catalysis, energy conversion, and protective coatings. Quartz crystal microbalance (QCM) and in situ infrared (IR) spectroscopic techniques were employed to probe how topological features of a material as well as structural differences of the analytes affect gas sorption. Detailed studies of the interactions of three categories of molecules: aromatic hydrocarbons, triatomic ambient gases, and chemical warfare agents, with metal-organic frameworks (MOFs) and polyurethane coatings were conducted to build structure–property relationships for the nature and energetics of gas sorption within each material. Differences in the molecular structure of the guest compounds were found to greatly influence how, and to what extent each molecule interacts with the MOF or polyurethane film. Specifically, IR studies revealed that transport of aromatic compounds within the zirconium-based MOF, UiO-66 was limited by steric restrictions as molecules passed through small triangular apertures within the pore environment of the MOF. In contrast, the smaller triatomic molecules, CO2, SO2, and NO2, were able to pass freely through the MOF apertures and instead reversibly adsorbed inside the MOF cavities. Specifically, SO2 and NO2 were observed to preferentially bind to undercoordinated zirconium sites located on the MOF nodes. In addition, uptake of CO2, SO2, and NO2 was also aided by dispersion forces within the confined pore environments and by hydrogen bond formation with μ3 OH groups of the MOFs. Dimethyl chlorophosphate (DMCP), a nerve agent simulant that contains several electronegative moieties, was also found to strongly adsorb to undercoordinated zirconium; however, unlike in the aromatic and triatomic molecule systems, DMCP remained permanently bound to the MOFs, even at high temperatures. Finally, QCM studies of mustard gas simulant uptake into polyurethane films of varying hard:soft segment compositions revealed that dipole-dipole and dipole-induced dipole interactions were responsible for favorable absorption conditions. Furthermore, the ratio of hard and soft segment components of the polyurethane had a minor impact on simulant adsorption. Higher hard-segment content resulted in a more crystalline film that reduced simulant uptake, whereas the rubbery, high soft segment polyurethane allowed for greater vapor absorption. Ultimately, molecular-level insight into how the chemical identity of a guest molecule impacts the mechanism and energetics of vapor sorption into both MOFs and polymeric films can be extended to other relevant systems and may help identify how specific characteristics of each material, such as size, shape, and chemical functionality impact their potential use in targeted applications. / Doctor of Philosophy / The nature in which specific gases interact with materials will largely dictate how the material can be utilized. By understanding where and how strongly gas molecules interact with a material, scientists and engineers can rationally design new and improved systems for targeted applications. In the research described in this thesis, we examined how the chemical structure of three different groups of compounds, which have relevance in many industrial, environmental, and defense-related applications, affected the type and strength of interaction between the gas and material of interest. From these studies, we have identified how key properties and features within the examined materials such as size, shape, and chemical composition, lead to significant differences in how vapor molecules interacted with the materials. For example, benzene, toluene, and xylene, which are incredibly important chemicals in industry, were found to be restricted by narrow passageways as they moved through materials with small pores. In contrast, small gases present in the environment from combustion exhaust such as CO₂, SO₂, and NO₂ were able to freely traverse through the passageways, and instead weakly interacted with specific chemical groups inside the cavities of the material. On the same material however, a third class of compounds, organophosphorus-containing chemical warfare agent mimics, irreversibly reacted with chemical groups of the surface, and remained bound even after exposure to high temperatures. Ultimately, the work presented in this thesis is aimed at providing key fundamental insights about specific classes of materials on how, and how strongly they interact with targeted hazardous vapors, which can be utilized by synthetic chemists to design next generation materials.

Metal oxide and metal oxide-supported metal nanoparticles can adsorb and decompose chemical warfare agents (CWAs) and their simulants. Nanoparticle activity depends on several factors including chemical composition, particle size, and support, resulting in a vast number of materials with potential applications in CWA decontamination. Current instrumentation in our laboratory used to investigate fundamental gas-surface interactions require extensive time and effort to achieve operating conditions. This thesis describes the design and construction of a high-throughput, high vacuum surface analysis instrument capable of studying interactions between CWA simulants and nanoparticulate surfaces. The new instrument is small, relatively inexpensive, and easy to use, allowing for expeditious investigations of fundamental interactions between gasses and nanoparticulate samples. The instrument maintains the sample under high vacuum (10?⁷-10?⁹ torr) and can reach operating pressures in less than one hour. Thermal control of the sample from 150-800 K enables sample cleaning and thermal desorption experiments. Infrared spectroscopic and mass spectrometric methods are used concurrently to study gas-surface interactions. Temperature programmed desorption is used to estimate binding strength of adsorbed species. Initial studies were conducted to assess the performance of the instrument and to investigate interactions between the CWA simulant dimethyl methylphosphonate (DMMP) and nanoparticulate silicon dioxide. / Master of Science

Developing methods to detect, adsorb, and decompose chemical warfare agents (CWAs) is of critical importance to protecting military and civilian populations alike. The sorption of dimethyl methylphosphonate (DMMP), a CWA simulant, into trisilanolphenyl-POSS (TPP) films has previously been characterized with reflection absorption infrared spectroscopy, x-ray photoelectron spectroscopy, and uptake coefficient determinations [1]. In our study, the quartz crystal microbalance (QCM) is used to study the sorption phenomena of DMMP into highly ordered Langmuir-Blodgett (LB) films of TPP. In a saturated environment, DMMP sorbs into the TPP films, binding to TPP in a 1:1 molar ratio. Although previous work indicated these DMMP-saturated films were stable for several weeks, DMMP is found to slowly desorb from the TPP films at room temperature and pressure. Upon application of vacuum to the DMMP-saturated films, DMMP follows first-order desorption kinetics and readily desorbs from the film, returning the TPP film to its original state. [1] Ferguson-McPherson, M.; Low, E.; Esker, A.; Morris, J. J. Phys. Chem. B. 2005, 109, 18914. / Master of Science