The covalent chemistry of individual reactants bound within a protein nanopore can be monitored by observing the ionic current flow through the pore, which acts as a nanoreactor responding to bond-making and bond-breaking events. However, chemistry investigated in this way has been largely confined to the reactions of thiolates, presented by the side chains of cysteine residues. The introduction of unnatural amino acids would provide a large variety of reactive side chains with which additional single-molecule chemistry could be investigated. An efficient method to incorporate unnatural amino acid is semisynthesis, which allows site-specific modification with a chemically-defined functional group. However, relatively little work has been done on engineered membrane proteins. This deficiency stems from attributes inherent to proteins that interact with lipid bilayer, notably the poor solubility in aqueous buffer. In the present work, four different derivatives α-hemolysin (αHL) monomer were obtained either by two- or three-way native chemical ligation. The semisynthetic αHL monomers were successfully refolded to heptameric pores and used as nanoreactors to study single-molecule chemistry. The semisynthetic pores show similar biophysical properties to native αHL pores obtained from an in vitro transcription and translation technique. Interestingly, when αHL pores with one semisynthetic subunit containing a terminal alkyne group were used to study Cu(I)-catalyzed azide-alkyne cycloaddition, a long-lived intermediate in the reaction was directly observed.

Hydrogenases are a family of enzyme that catalyses the bidirectional interconversion of H⁺ and H₂. There are two major classes of hydrogenases: the [NiFe(Se)]- and [FeFe]-hydrogenases. Both of these benefit from characteristics which would be advantageous to their use in technological devices for H₂ evolution and the generation of energy. These features are explored in detail in this thesis, with a particular emphasis placed on defining the conditions that limit the activity of hydrogenases when reducing H⁺ to produce H₂. Electrochemistry can be used as a direct measure of enzymatic activity; thus, Protein Film Electrochemistry, in which the protein is adsorbed directly onto the electrode, has been employed to probe catalysis by hydrogenases. Various characteristics of hydrogenases were probed. The catalytic bias for H₂ production was interrogated and the inhibition of H₂ evolution by H₂ itself (a major drawback to the use of some hydrogenases in technological devices to produce H₂) was quantified for a number of different hydrogenase. Aerobic inactivation of hydrogenases is also a substantial technological limitation; thus, inactivation of both H₂ production and H₂ oxidation by O₂ was studied in detail. This was compared to inhibition of hydrogenases by CO so as to elucidate the mechanism of binding of diatomic molecules and determine the factors limiting inactivation. This allows for a preliminary proposal for the genetic redesigning of hydrogenases for biotechnological purposes to be made. Finally, preliminary investigation of the binding of formaldehyde, potentially at a site integral to proton transfer, opens the field for further research into proton transfer pathways, the structural implications thereof and their importance in catalysis.

One of today’s most pressing scientific challenges is the conception, development and deployment of renewable energy technologies that will meet the demands of a rapidly increasing population. The motivation is not only dwindling fossil fuel reserves, but also the necessary curtailment of emissions of the greenhouse gas carbon dioxide (a product of burning fossil fuels). The sun provides a vast amount of energy (120,000 TW globally), and one major challenge is the conversion of a fraction of this energy into chemical energy, thereby allowing it to be stored. Dihydrogen (H₂) that is produced from water is an attractive candidate to store solar energy (a ‘solar fuel’), as are high energy carbon-containing molecules (such as CO) that are formed directly from carbon dioxide. One key aspect is the development of catalysts that are able to offer high rates and efficiencies. In biology, some microbes acquire energy from the metabolism of H₂ and CO. The biological catalysts - enzymes - that are responsible are hydrogenases (for the oxidation of H₂ to protons); and carbon monoxide dehydrogenases (CODHs, for the oxidation of CO to CO₂). These redox enzymes, containing nickel and iron as the only metals, are extraordinary in terms of their catalytic characteristics: many are fully reversible catalysts and offer very high turnover frequencies (thousands per second are common), with only tiny energy input requirements. This Thesis uses a hydrogenase from the bacterium Escherichia coli, and two CODHs from the bacterium Carboxydothermus hydrogenoformans, as the catalysts in H2 production and CO₂ reduction systems. Chapter 3 describes the concept and development not of a solar fuel system, but of a device that catalyses the water-gas shift reaction (the reaction between CO and water to form H₂ and CO₂) - a process of major industrial importance for the production of high purity H₂. Chapters 4, 5 and 6 detail photochemical CO₂ reduction systems that are driven by visible light. These systems, operating under mild, aqueous conditions, involve CODHs attached either to TiO₂ nanoparticles that are sensitised to visible light by the co-attachment of a ruthenium-based dye complex, or to cadmium sulfide nanomaterials that, having a narrow band gap, are inherently photoexcitable by visible light. The motivation here is not the construction of technological devices; indeed, the enzymes that are used are fragile, highly sensitive to oxygen, and impossible to scale to industrial levels. Rather, the drivers are those of scientific curiosity (can the incorporation of these remarkable biological catalysts enable the creation of outstanding solar fuel devices?), and of producing systems that serve as benchmarks and inspiration for the development of fully synthetic systems that are robust and scalable.

Bromodomains (BRDs) are protein modules which bind to acetylated lysines on histones and transcriptional regulating proteins. BRD-containing proteins are involved in a large variety of critical cellular processes and their misregulation, or mutation of the genes encoding for them, has been linked to pathogenesis in humans. The generation of chemical probes (potent, selective and cell permeable small molecules) in cellular experiments to investigate the biological role of the BRDs is thus desirable. A chemical probe for the CREB (cyclic-AMP response element binding protein) binding-protein (CBP) and E1A binding protein (p300) BRDs was developed, starting from a low molecular weight, weak and non-selective dimethylisoxazole benzimidazole compound. Parallel synthesis was used to optimise the initial hit into a weak, but selective CBP inhibitor. Further modification of the two N-1 and C-2 moieties of the benzimidazole scaffold, led to highly potent and selective CBP inhibitors. Structure-guided design was then applied to optimise the selectivity of the series for CBP over the first domain of bromodomain-containing protein 4 BRD4(1). A strategy to reduce the flexibility of the N-1 and C-2 ethylene linker groups through the incorporation of conformational constraints led to inhibitors with increased selectivity. The optimal compound was highly potent for the CBP and p300 BRDs (K_d 21 nM and 32 nM, respectively) and selective over BRD4(1) (40-fold and 27-fold, respectively). On-target cellular activity was observed in a fluorescence recovery after photobleaching (FRAP) assay (0.1 μM), a p53 reporter gene assay (IC₅₀ 1.5 μM) and a Förster resonance energy transfer (FRET) assay (5 μM). A weak indolizine bromodomain-containing protein 9 (BRD9) inhibitor was used as the starting point for the development of a BRD9/BRD7 chemical probe. Analogues were synthesised via [3+2] cycloadditions. An optimised compound was found to be highly potent (68 nM) and selective over BRD4(1) (34-fold). On-target cellular activity was observed in a FRAP assay (5 μM). Efforts were made to improve the cellular activity through the introduction of an ionisable centre to aid solubility. A selection of piperazine analogues were shown to be potent and selective, and these compounds warrant further investigation of their selectivity and cellular activity. Overall, the work has led to the first potent and selective inhibitors of the CBP/p300 and BRD9 BRDs. It also highlights the role of structural analysis in the development of inhibitors that modulate protein-protein interactions.

Lactate Dehydrogenase-A (LDH-A) is up-regulated in a broad array of cancers and is associated with poor prognosis. Involved in the hypoxic response, LDH-A is a HIF-1 target and is responsible for the enzymatic reduction of pyruvate to lactate. This is important for several reasons, chiefly (1) the regeneration of NAD+ which feeds back into earlier glycolytic stages and (2) the depletion of intracellular pyruvate concentrations. High intracellular pyruvate is known to inhibit HDACs and is associated with increased apoptosis. LDH-A is also known to be controlled by oncogenes such as c-Myc suggesting an oncogenic role. Studies have shown that the knock-out of LDH-A reduces proliferation and tumourgenicity, and stimulates the mitochondria. This thesis therefore had three aims: firstly, to validate LDH-A inhibition and elucidate its full nature in terms of the implications for tumour survival; secondly, to ascertain the role of LDH-B in order to determine whether selectivity towards LDH-A would be a necessary feature of any small molecule; lastly, to recapitulate siRNA mediated LDH-A inhibition with small molecule inhibitors that had the potential for clinical application. The thesis examined both clinical data and a broad panel of cultured cancer cell types in order to select appropriate model in which to validate siRNA mediated inhibition of LDH-A and LDH-B. After it was demonstrated that LDH-A inhibition reduced the growth of cultured cells, a range of techniques were used to quantify this reduced growth in terms of cell death and changes in metabolism. Further to this, literature studies had proposed a role for LDH-B in maintaining lactate fuelled tumour growth; however, this thesis shows that in the cell lines studied, lactate-fuelled tumour growth was an LDH-A dependent phenomenon. Finally, a high throughput assay system was designed and validated and a library of small molecules was selected, synthesized, and screened in order to identify selective inhibitors of LDH-A.

In the last decade, dynamic combinatorial mass spectrometry (DCMS) with protein targets has emerged as a promising method for the identification of enzyme-inhibitors. 2-Oxoglutarate (2OG) oxygenases are involved in important biological processes related to many diseases; several human 2OG oxygenases are targeted for pharmaceutical intervention. This thesis describes inhibition studies on three 2OG oxygenases using DCMS and structure activity relation (SAR) studies. Disulphide based DCMS was used for the identification of N-oxalyl based lead inhibitors for the 2OG oxygenase AlkB from Escherichia coli. Crystallographic analyses of AlkB with a lead inhibitor assisted in the design of a second generation of inhibitors using N-oxalyl, pyridyl and quinolinyl scaffolds. Crystallographic and kinetic data of three potent and selective AlkB inhibitors validates the DCMS approach for the development of 2OG oxygenase inhibitors. The hypoxia inducible factor hydroxylase, prolyl hydroxylase domain 2 (PHD2), was then used as the model enzyme for the development of a novel DCMS approach employing the reversible reaction of boronic acids with diols to form boronate esters. The ‘boronate’ DCMS method was used to identify pyridyl- substituted lead compounds. Further modification of the pyridine scaffold, based on structural analyses, led to the development of highly potent and selective PHD2 inhibitors. To identify inhibitors for the fat mass and obesity associated protein (FTO), another 2OG oxygenase, an inhibition assay was developed. The inhibition assay was used in conjunction with a differential scanning fluorimetry (DSF) binding assay to identify isoquinolinyl and pyridyl inhibitor scaffolds, related to those used in the DCMS studies. FTO complexed structures of these compounds, and with a natural product anthraquinone, enabled the design and synthesis of new inhibitors that are both co-substrate and substrate competitors of FTO. One such compound proved to be a potent FTO inhibitor with improved selectivity over other 2OG oxygenases. Overall, the work validates the use of DCMS methods for the development of potent and selective inhibitors for 2OG oxygenases, and by implication of other enzyme families.

(3R,5R)-Clavulanic acid is a clinically important inhibitor of Class A β-lactamases. Progress has been made in to establishing the steps of clavulanic acid biosynthesis leading to (3S,5S)-clavaminic acid. However, the mechanism by which (3S,5S)-clavaminic acid is converted to the penultimate intermediate (3R,5R)-clavaldehyde remains elusive. It is believed that the products of the later genes (orf10-orf18) of the clavulanic acid biosynthesis gene cluster are probably involved in this conversion. Part I of this thesis describes biochemical and structural studies carried out on OAT2, a member of N-terminal nucleophile (Ntn) hydrolase superfamily of enzymes. OAT2 has been characterised to be an ornithine acetyl transferase (OAT) and is involved in clavulanic acid biosynthesis. OAT2 catalyses the reversible transfer of the acetyl group between N-acetyl-L-ornithine and L-glutamate. It was found that this reaction is catalysed via the formation of an acyl-enzyme intermediate. Subsequent studies including mass spectrometry, 13C NMR spectroscopy, infrared spectroscopy, X-ray crystallography and molecular dynamics simulations, further confirmed the viability of the intermediate. This acyl-enzyme intermediate of OAT2 was found to be exceptionally stable at physiological pH, as compared to the acyl-enzyme intermediates involved in catalysis by hydrolytic enzymes including proteases, Ntn hydrolases and β-lactamses. The X-ray studies revealed possible reason for this unusual stability. The infrared studies revealed two conformations for the acyl-enzyme. Modeling (MDS) studies assigned one of these to the structure observed by X-ray and proposed the other one to result from a hydroxyl hydrogen 'flip' involving the oxyanion hole component Thr-111 resulting in a singly hydrogen bonded acyl-enzyme intermediate. α, β Subunit co-expression studies with OAT2 were used to investigate the autocatalytic cleavage step. In one case an interesting N-acyl enzyme species was observed. Part II of this thesis describes efforts carried out to characterise the ORF10 and ORF15 proteins of clavulanic acid biosynthesis. ORF10 was characterised to be an 'active' cytochrome P450 and ORF10 crystals were obtained in the presence spinach ferredoxin, highlighting the role of the ferredoxin interaction in assisting ORF10 crystallisation. ORF15 was shown to be a probable peptide transporter, which binds bradykinin as observed in the crystal structure.

The complexity of all biomolecules in existence today can be attributed to the variation of the amino acid repertoire. In nature, 20 canonical amino acids are translated to form these biomolecules, however, many of these amino acids have revealed posttranslational modifications (i.e. acetylation, methylation) after incorporation. Amino acids that exhibit PTM are known for their involvement in cellular processes such as DNA repair and DNA replication; these PTMs are commonly found on histones within the chromatin complex. Utilization of in vivo site-specific incorporation has recently reported functionality of post-translationally modified amino acids.1 xii Here we report the synthesis and in vivo site-specific incorporation of the histone PTM, 2-hydroxyisobutyrl lysine (Khib), with the pyrrolysyl tRNA/ RNA synthetase system. This translational machine can better serve to probe Khib for functional benefits. Additionally, this thesis focuses much of its attention on the development of unnatural amino acids (UAA) with optogenetic characteristics. These UAAs, if site-specifically incorporated, can be used to control enzymes and proteins through rapid light perturbation (365nm UV light). Furthermore, discussed is the synthesis of photo-caged threonine and photo-caged serine as potential substrates for the pyrrolysyl translational machinery.

This thesis describes the design, synthesis, analysis, mechanistic evaluation and optimisation of small molecule probes for the specific detection of proteins, focusing on the target protein human arylamine <i>N</i>-acetyltransferase type 1 (HUMAN(NAT1)) and its murine homologue, mouse arylamine <i>N</i>-acetyltransferase type 2 (MOUSE(NAT2)). The HUMAN(NAT1) gene is reported to be one of the most highly overexpressed genes in estrogen-receptor-positive (ER+) breast tumours, leading to its potential use as both a novel diagnostic biomarker and a novel therapeutic target for this disease. <strong>Chapter 1</strong> reviews the literature on optical methods for the specific detection of a protein target, exploring strategies both based on biosensors and on chemical probes, before introducing the arylamine <i>N</i>-acetyltransferases as a family of enzymes. In <strong>Chapter 2</strong>, a family of naphthoquinone inhibitors of HUMAN(NAT1) are introduced, which undergo a colour change from red to blue upon binding specifically to the enzyme. The mechanism of this colour change, a proton transfer-mediated process, is discussed via the synthesis, pharmacological and colorimetric evaluation of close analogues of the hit compound lacking a key acidic sulfonamide-N<i>H</i> proton. During these studies, it was found that direct <i>O</i>-methylation of a sulfonamide is possible under certain conditions; such a reaction has not previously been reported. Furthermore, upon heating in polar solvents the <i>O</i>-methylated sulfonamide was observed to undergo rearrangement, and the mechanism of this process is investigated via NMR and kinetic studies. In <strong>Chapter 3</strong>, the design, synthesis and evaluation of HUMAN(NAT1) inhibitors with improved pharmacological and colorimetric profiles over the initial hit are described. From this optimisation, structure-activity relationships and an in silico model of interactions between the inhibitors and enzyme are evaluated. Testing of these compounds in cellular environments, however, exposes some limitations of this approach, notably the lack of sensitivity of the probes when dosed at low concentrations in cellular samples. In order to overcome this limitation, in <strong>Chapter 4</strong> fluorescent analogues of the hit compound are designed and synthesised. Initial compounds developed in this series possess promising properties, but each compound generated suffers from either a low fluorescent intensity, lack of a <i>p</i>H-dependent switch in fluorescence or a low fluorescence excitation wavelength, which overlaps with those of tryptophan or tyrosine residues in proteins. Insights into the mechanism of molecular fluorescence and application of some simple quantum mechanical principles, however, lead to the design of a species which possesses all the required properties. The fluorescent emission intensity of this probe correlates linearly with [MOUSE(NAT2)] in E. coli cell extracts, and can quantify as little as 0.64% MOUSE(NAT2) in the samples; furthermore, the probe is capable of unambiguously detecting HUMAN(NAT1) within a cell extract from the ER+ breast cancer cell line ZR-75-1; future work on this probe may therefore enable its clinical use in improved early diagnosis of breast tumours. This study also represents, to the best of our knowledge, the first ever example of a small molecule, non-covalent probe capable of quantifying the concentration of a target protein in cellular extracts. In <strong>Chapter 5</strong>, the series of naphthoquinone probes is further optimised in order to study the roles of HUMAN(NAT1) in a cellular environment. Firstly, structure-activity relationships are utilised to design inhibitors with improved physical properties such as aqueous solubility and cell membrane permeability, in order to test the effect of HUMAN(NAT1) inhibitors in tumour cell models, which could have implications for the future use of a HUMAN(NAT1) inhibitor as a therapeutic agent in oncology. Secondly, the effect of the cofactor folic acid on the function and activity of HUMAN(NAT1) is explored. Finally, in <strong>Chapter 6</strong>, the conclusions of this study are outlined and a hypothesis as to how the concepts developed in this thesis might be applied to alternative, more ubiquitous biological targets is discussed, paving the way for future investigations.

Ce travail de recherche vise à mettre au point la première gamme de sondes magnétogéniques à base de Fer(II) répondant à un analyte biochimique. L’objectif est de créer les premières sondes résolument silencieuses en IRM qui ne génèrent un signal qu’après leur rencontre avec l’analyte, une caractéristique hautement désirable dans le domaine de l’IRM moléculaire. Au cours d’un travail doctoral précédent, une paire de complexes ferreux modèles, hydrosolubles et chargés positivement, a été identifiée et a permis de valider l’idée de ce concept OFF-ON in vitro. Dans un premier temps nous avons démontré qu’un tel concept pouvait être également validé in vivo chez la souris. Ceci a nécessité le développement de stratégies de synthèse organique inédites et notamment la mise au point de synthons tétrazolyleméthyle protégés. Une telle méthodologie a notamment démontré son efficacité dans la synthèse du premier analogue totalement azoté de l’EDTA. Par la suite nous avons démontré qu’il était possible sous certaines conditions, non physiologiques, de réaliser les exigences du concept de magnétogénèse. En particulier nous avons démontré que des unités amidines peuvent être modifiées, en ayant recours à des concepts de type prodrogue, et utilisées pour éteindre et allumer le spin électronique du Fer(II) après rencontre avec l’analyte. Enfin nous avons également démontré au cours de ce travail, avec une seconde stratégie, que le concept de magnétogénèse était possible dans des conditions physiologiques et constantes et avons construit un modèle biologique afin d’évaluer une molécule candidate prometteuse in cellulo. / This PhD project aims to develop the first line of Iron(II) based magnetogenic probes that respond to bio-chemical analytes. It sets out to address one of the main limitations of responsive probes by rendering the initial probe completely MRI silent. During the previous investigations of the Bio-organic chemistry group, a duo of Iron(II) low spin-high spin parent complexes has been identified as the basis for a magnetogenic design. In the current work we have validated this OFF-ON approach, in vivo, by ensuring the electroneutrality of the final contrast agent. Such a feature required the development of protected synthons for the convergent introduction of tetrazolylmethyl chelating motifs. And such a synthetic methodology was also applied for the synthesis of the first full nitrogen analog of EDTA. In a second part of this work, a first magnetogenic concept was explored exploiting amidine moieties to silence or awaken the electronic spin of ferrous complexes. We demonstrated that this magnetogenic concept was valid, after a short chemical stimulation, though at the expense of harsh acidic conditions to trigger the paramagnetism of the final complex. Finally we successfully explored a second magnetogenic concept operating in physiological conditions and responding to bio-chemical stimulations.We then evaluated the most promising candidate in cellulo by developing a biological model expressing the nitroreductase enzyme.