Chloride ions present in the marine atmosphere contained in marine aerosols is investigated for a relationship with chloride that accumulated into concrete. Chloride profiles are conducted on several concrete mixes containing fly ash, silica fume, and slag, with water to cementitious ratios of 0.35, 0.41, and 0.47. The chloride accumulation in concrete samples exposed to the environment is investigated with relation to the chloride deposition from the marine atmosphere measured via the wet candle test. Results indicate a possible relationship for the total accumulated chloride in the concrete with the accumulated chloride deposition (wet candle). Over the exposure periods, concrete specimens with 50% slag addition and 0.47 w/cm had the lowest average rates of chloride accumulation for deposition under 100 g/m2day. Chloride accumulation was lower in concrete containing 20% fly ash and 8% silica fume with 0.35 w/cm for chloride deposition rates over 200 g/m2day. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2014. / FAU Electronic Theses and Dissertations Collection

The aim of this study was to investigate the diffusion of chloride ions into concrete samples that were exposed in scenarios that simulate the splash, tidal, atmospheric, and immersed portions of a marine structure. To study the atmospheric deposition, the project also investigated the relationship between chloride ion deposition on the wet candle and its accumulation into concrete samples. Results from the wet candle experiment indicated that between 2% and 45% of the chlorides deposited per square meter of exposed area could be found within the concrete samples. After 6 months, slag G1a blocks showed the most resistance to chloride penetration in the tidal and splash simulations. After 10 months of exposure, fly ash samples had the slowest rates of diffusion in the tidal simulation while the fly ash + silica fume samples and the slag samples measured similar rates of diffusion within the tidal zone. After 90 days of curing, cylinders composed of 20% fly ash & 8% silica fume measured the highest average resistivity values and were found to be less vulnerable to chloride ion penetration than the 20% fly ash and the 50% slag concrete through rapid migration tests. / by Victor Anthony Echevarria. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.

The durability of Reinforced Concrete (RC) structures in the Marine environment is causing serious concern in the structural infrastructure. Reinforced concrete structures, exposed to aggressive environments, are expected to last with little or no maintenance for long periods of time. However, one of the most serious environmental exposures that causes degradation is Chloride Diffusion, due to shrinkage, atmospheric corrosion, and tide-induced wet and dry conditions at the air-water interfaces of coastal structures. Therefore, chloride diffusivity, which correlates with the electrical resistivity, has a significant impact on the durability of concrete. Concrete chloride diffusivity has been experimented by multiple agencies and researchers on sound concrete, but there is a considerable need for investigation of the durability of cracked concrete in the marine environment. The two test methods carried out are presented: Standardized American Society for Testing and Materials (ASTM) C1202 for Rapid Chloride Permeability (RCP) and ASTM D257 for Surface Resistivity (SR), and Nordtest (NT) Build 492 for Rapid Chloride Migration (RCM) and Bulk Resistivity (BR) for both sound (uncracked) and cracked (micro and macro) concrete. The limitations of the ASTM method, due to measurements before the steady-state migration is reached, does not account for leakage in cracked concrete, and the heating of the specimen due to higher current that increase the conductivity are indicated. The Rapid Chloride Migration test provides for the non-steady state of diffusion. Again, Bulk Resistivity, in contradistinction to Surface Resistivity is more accurate for cracked concrete. The correlation betweeen RCM-BR are plotted. Chloride Permeability/Migration is an important parameter that governs the Durability of Concrete. The principal contribution is the highlighting of the inadequacy of the current widely used standard ASTM C1202 for diffusivity testing, and the need for revision with further investigation. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection

L'objectif de ce travail est de contribuer à la valorisation du métakaolin en substitution du ciment dans les matrices cimentaires en levant certains verrous scientifiques. En effet l'utilisation d'additions minérales modifie les propriétés des bétons, que cela soit à l'état frais, à l'état durcissant ou à l'état durci. A l'état frais, la rhéologie a été étudiée avec l'adaptation et l'application d'une méthode de formulation pour béton auto-plaçant. Cette application a été développée jusqu'à l'échelle industrielle. A l'état durcissant, la phase d'hydratation a été étudiée en s'attardant particulièrement sur l'effet de la nature du ciment substitué sur la réactivité du métakaolin. Enfin à l'état durci deux caractéristiques de durabilité ont été explorées, à savoir l'effet du métakaolin sur la carbonatation dans une première partie, puis sur la diffusion des chlorures dans une deuxième partie. / The objective of the present thesis was to promote the use of metakaolin as substitute for cement in cementitious matrix by unlocking several scientific challenges. The use of mineral additions modifies the properties of concrete in the fresh state, the hardening state and the durability state. In the fresh state, rheology was studied by adapting a formulation method for self-compacting concretes. This application was then further developed to be used at an industrial scale. In the hardening state, the hydration phases were analysed with a focus on the effect of the cement nature on the metakaolin reactivity. Finally in the durability state, two particular features were studied:1) the metakaolin effect on the carbonation kinetic and 2) the effect of the metakaolin on the chloride diffusion.