Soil column studies were performed on a chromium contaminated soil from the United Chrome Products Superfund Site currently undergoing a pump-and-treat cleanup process. The goal of the research was to provide insight into the feasibility of chemically changing the injection fluid of the pump-and-treat system to enhance hexavalent chromium (Cr(VI)) mobility. The parameters tested were pH, ionic strength, and competitive anion type and concentration. Ionic strength effects were investigated by adjusting the NaCl concentration of the extracting solution and by observing the influence of varying anion concentrations on desorption (bicarbonate, sulfate, and phosphate). The results indicated that high ionic strength solutions slow the rate of Cr(VI) desorption. This possibly indicates most of the Cr(VI) was in pore water solution and was adsorbing, slowing the removal process. Cr(VI) desorption was fastest for distilled water solution followed by competitive anion/distilled water solutions. The high ionic strength extracting solutions, 0.05 M and 0.10 M NaCl, had the slowest Cr(VI) desorption rates. Effluent pHs dropped as the ionic strength was increased (increasing NaCl concentrations) which was attributed to a Na-H exchange. Increased concentrations of bicarbonate, sulfate, and phosphate resulted in only small pH differences in the effluent of less than 0.5 pH units. The effect of pH was investigated by varying the pH of the 0.01 M NaCl solution with strong acid and base and by varying the pH of phosphate competitive anion solutions. The effects of changing 0.01 M NaCl solution pH were inconclusive. Differences between Cr(VI) desorption rates for the soil columns with adjusted influent pHs were small. Cr(VI) desorption curves and column effluent pH values for phosphate solutions of varying influent pH values were nearly identical, indicating that soil buffering and effluent pH are more important factors than influent pH in achieving Cr(VI) desorption. Nitrate, bicarbonate, sulfate, and phosphate were investigated to determine the effect of various competitive anions on Cr(VI) desorption. The effectiveness of each anion at extracting Cr(VI) from soil appeared to follow the order of adsorption affinity to the soil. / Graduation date: 1992

Graduation date: 1993

D. Tech. Chemical Engineering / Aims of this research project was to add value to largely wasted South African sawdust by development of low-cost AC of high efficiency for removal of toxic Cr (VI), phenol and glutaraldehyde from dilute aqueous media. The main objectives of the research project were: a) To develop low-cost AC based on South African P. patula sawdust using economical physical superheated steam activation.Characterization of carbon samples for selection of optimum preparation conditions for development of low-cost AC of effective microporosity mesoporosity and surface functionality for enhanced adsorption capacity of Cr (VI) and/or phenol and/or glutaraldehyde from dilute aqueous solution. Acid-amine surface groups modification of optimally developed AC for further enhancement of adsorption capacity for mixed polarized glutaraldehyde molecules from aqueous solution. b) To evaluate the aqueous phase batch adsorption properties of developed AC for Cr (VI) and phenol and, of acid-amine modified developed AC for glutaraldehyde. Determination of optimum pH for adsorption; accurate adsorption isotherm modelling for determination of maximum adsorption capacity, comparison of maximum adsorption capacities for Cr (VI) and phenol of developed AC with commercial AC and literature ACs, and attempt to establish average micropore size for enhanced capacity for Cr (VI) and phenol from dilute aqueous solution.Kinetics reaction and diffusion modelling for determination of adsorption rate constants and diffusion parameters; and determination of adsorption thermodynamic parameters.Evaluation of equilibrium selectivity of developed AC for Cr (VI) and/or phenol in binary aqueous solutions. c) To evaluate aqueous phase fixed-bed adsorption characteristics of developed AC for single Cr (VI) and mixed solution using Rapid Small Scale column Tests (RSSCTs). Generation of breakthrough curves at optimum adsorption conditions for evaluation of column performance indicators at different process conditions, bed regeneration-reusability potential, and dynamic adsorption selectivity of developed AC for Cr (VI) from solution of base metals. Determination of column diffusion parameters; accurate mass transfer and empirical modelling of breakthrough data; determination of applicable RSSCT scaling equation; and optimization of breakthrough data for accurate RSSCT scale-up.