Spelling suggestions: "subject:"forchannel"" "subject:"downchannel""
1 |
Space-time processing for wireless mobile communicationsSee, Chong Meng Samson January 1999 (has links)
Intersymbol interference (ISI) and co-channel interference (CCI) are two major obstacles to high speed data transmission in wireless cellular communications systems. Unlike thermal noise, their effects cannot be removed by increasing the signal power and are time-varying due to the relative motion between the transmitters and receivers. Space-time processing offers a signal processing framework to optimally integrate the spatial and temporal properties of the signal for maximal signal reception and at the same time, mitigate the ISI and CCI impairments. In this thesis, we focus on the development of this emerging technology to combat the undesirable effects of ISI and CCL We first develop a convenient mathematical model to parameterize the space-time multipath channel based on signal path power, directions and times of arrival. Starting from the continuous time-domain, we derive compact expressions of the vector space-time channel model that lead to the notion of block space-time manifold, Under certain identifiability conditions, the noiseless vector-channel outputs will lie on a subspace constructed from a set. of basis belonging to the block space-time manifold. This is an important observation as many high resolution array processing algorithms Can be applied directly to estimate the multi path channel parameters. Next we focus on the development of semi-blind channel identification and equalization algorithms for fast time-varying multi path channels. Specifically. we develop space-time processing algorithms for wireless TDMA networks that use short burst data formats with extremely short training data. sequences. Due to the latter, the estimated channel parameters are extremely unreliable for equalization with conventional adaptive methods. We approach the channel acquisition, tracking and equalization problems jointly, and exploit the richness of the inherent structural relationship between the channel parameters and the data sequence by repeated use of available data through a forward- backward optimization procedure. This enables the fuller exploitation of the available data. Our simulation studies show that significant performance gains are achieved over conventional methods. In the final part of this thesis, we address the problem identifying and equalizing multi path communication channels in the presence of strong CCl. By considering CCI as stochasic processes, we find that temporal diversity can be gained by observing the channel outputs from a tapped delay line. Together with the assertion that the finite alphabet property of the information sequences can offer additional information about the channel parameters and the noise-plus-covariance matrix, we develop a spatial temporal algorithm, iterative reweighting alternating minimization, to estimate the channel parameters and information sequence in a weighted least squares framework. The proposed algorithm is robust as it does not require knowledge of the number of CCI nor their structural information. Simulation studies demonstrate its efficacy over many reported methods.
|
2 |
New sharing method between the Fixed Satellite Service and the Aeronautical Mobile Satellite Service in the 14.0-14.5 GHz bandSmith, Justin L. 10 February 2003 (has links)
In the US, the 14.0-14.5 GHz band is allocated on a primary basis to the Radio-Navigation and the FSS with a secondary allocation to the LMSS. The Radio-Navigation service is the use of RADAR for navigation. An example of Radio-Navigation is the ground proximity radar used for airplane collision avoidance. FSS stands for the Fixed Satellite Service. In general, an FSS is a satellite network consisting of a geo-stationary satellite and non-movable earth stations on the ground. An example of an FSS is the earth terminals used at gas stations to verify credit cards and centrally track inventory. The 14.0-14.5 GHz band is also allocated on a secondary basis to the LMSS or Land Mobile Satellite Service. This is a satellite network with a satellite and a movable terrestrial non-aeronautical earth station. An example of an LMSS is a system called Omnitracs, which provides a satellite-based data connection for the trucking industry. AMSS stands for the Aeronautical Mobile Satellite Service. An AMSS is an LMSS dedicated only to airplanes.
The CPM or Conference Preparatory Meeting after WRC or World Radio Conference-2000 decided there was an urgent need for technical and regulatory studies covering sharing between the FSS and the AMSS. The requirement for a report on the studies was added to the WRC-2003 agenda. The WRC also stipulated that the studies must demonstrate that sharing between the FSS and the AMSS is feasible enough to allocate AMSS a secondary status in the band. The studies need to be completed before WRC-2003. AMSS contends that sharing is feasible if their service can meet the same PFD limits of the LMSS. Presently, the FCC has licensed the AMSS on an experimental non-interference basis.
The FSS contends that characteristics are needed of the AMSS system and a detailed sharing study be completed to verify sharing is feasible. The FSS believes that sharing may not be feasible if the same transponder is used for AMSS and FSS. The FSS perceives that the AMSS is asking for a super secondary status. Super secondary status implies that the AMSS would only be required to adhere to PFD limits on individual aircraft and not for multiple aircraft in view of a victim FSS receiver. Future studies will clarify this issue.
The issues associated with the sharing analysis are; the modeling of the orbital separation of the satellites, the atmospheric interference into the communication link and the availability of the communication link between the FSS and the AMSS.
The issues associated with modeling of the simulation are the static, verses dynamic modeling environments and developing a dynamic software tool to track airplane movement. This thesis plans to propose a new sharing methodology between the FSS and the AMSS that could be contributed to the WRC-2003 agenda.
Three systems examples were provided at ITU meetings inresponse to the WRC-2003 agenda item. The three systems will abide by the ITU-R S.728 EIRP limits. The three systems indicate that static analysis shows that sharing is feasible involving only one aircraft as the interfere. This is not a reasonable solution for a real time environment because there is only one aircraft used. It is necessary for the link to support multiple aircraft.
The factors that indicate sharing is feasible are: non-harmful interference to the victim and reasonable enough link margin in the interfere system to make it viable. A viable system in the case of aircraft would include high-speed internet and video. The AMSS interfere system cannot propose a power limit that will not allow it to close it's own link.
In order to mitigate the interference, systems can agree to certain interference mitigation techniques. The different techniques are: transmitting power control, geostationary arc avoidance angle and orbital arc separation.
Power control as described above is the centralized control of the interfering antenna into the victim. This is done by simulating the interference environment and pre-scheduling the decreases of the transmitting power. This is a feasible solution except that it decreases the availability and thru-put of the interfere system. This approach can make the system have unrealistic link margins and spotty availability due to the pre-scheduled power control.
Another technique is the geostationary arc avoidance angle. This technique is not applicable since both the AMSS and FSS use geostationary orbits.
The third technique is geostationary separation. This technique requires co-channel systems to maintain a certain orbital spacing between them. FSS systems in certain bands have a minimum of 3 degrees of orbital spacing between co-channel systems. Since the AMSS has 01/25/03 a mobile terrestrial system (aircraft) as part of the link, it requires a higher orbital separation between it and the FSS system. The results of dynamic analysis indicate that this technique is feasible at 10 degree orbital spacing.
The Monte Carlo analysis completed for this thesis simulated the results of four scenarios: co-located, 3 degree, and 5 and 10-degree orbital separation. It can be determined from the results that the interference decreases as the orbital separation increases. These simulations were done based on a 10 aircraft interfere scenario. / Master of Science
|
3 |
A Model-Based Approach to Demodulation of Co-Channel MSK SignalsAhmed, Yasir 03 January 2003 (has links)
Co-channel interference limits the capacity of cellular systems, reduces the throughput of wireless local area networks, and is the major hurdle in deployment of high altitude communication platforms. It is also a problem for systems operating in unlicensed bands such as the 2.4 GHz ISM band and for narrowband systems that have been overlaid with spread spectrum systems.
In this work we have developed model-based techniques for the demodulation of co-channel MSK signals. It is shown that MSK signals can be written in the linear model form, hence a minimum variance unbiased (MVU) estimator exists that satisfies the Cramer-Rao lower bound (CRLB) with equality. This framework allows us to derive the best estimators for a single-user and a two-user case. These concepts can also be extended to wideband signals and it is shown that the MVU estimator for Direct Sequence Spread Spectrum signals is in fact a decorrelator-based multiuser detector.
However, this simple linear representation does not always exist for continuous phase modulations. Furthermore, these linear estimators require perfect channel state information and phase synchronization at the receiver, which is not always implemented in wireless communication systems. To overcome these shortcomings of the linear estimation techniques, we employed an autoregressive modeling approach. It is well known that the AR model can accurately represent peaks in the spectrum and therefore can be used as a general FM demodulator. It does not require knowledge of the exact signal model or phase synchronization at the receiver. Since it is a non-coherent reception technique, its performance is compared to that of the limiter discriminator. Simulation results have shown that model-based demodulators can give significant gains for certain phase and frequency offsets between the desired signal and an interferer. / Master of Science
|
4 |
System optimisation and radio planning for future LTE-advancedKhwandah, Sinan January 2015 (has links)
This work is related to wireless communication. In this Thesis three main issues are addressed for future cellular networks: power consumption, interference and mobility. These issues continue to be a burden on the system’s performance as long as technology keeps evolving. In the presented chapters, the focus was to introduce greater intelligence to the LTE system algorithms and bring to them a dynamic and self-organizing approach. The first approach concerns power consumption in wireless terminals. The currently applied solution to save energy is the DRX mechanism. It organizes the time when the terminal wakes up and starts receiving data, and when it goes into sleep mode in order to save its battery power. The current DRX is described as static or fixed which makes its parameters unsuitable for the nature of the bursty traffic. In this work an adaptive DRX mechanism is proposed and evaluated as the wireless terminal battery saving algorithm. The second approach is co-channel interference mitigation. To increase the system’s capacity and avoid spectrum scarcity, small cells such as Femtocells are deployed and operate on the same frequency bands as the Macrocell. Although these small nodes increase the system capacity, however, the challenges will be in the femtocells planning and management in addition to the interference issues. Here a dynamic interference cancellation approach is presented to enable the Femtocell to track the allocated resources to the Macro-users, and to avoid using them. The third approach concerns mobility management in heterogeneous networks. The wireless terminal may have different mobility levels during handover which increases the handover failures due to failure in handover commands and aging of the reported parameters. This issue is presented in detail with the aim to avoid performance degradation and improve the reporting mechanisms during fast mobility levels. For this regard the presented method proposes more cooperation between the serving cell and the end-user so that the large amount of overhead and measurement are reduced. Simulations with different configurations are conducted to present the results of the proposed models. Results show that the proposed models bring improvements to the LTE system. The enhanced self-organized architecture in the three presented approaches performs well in terms of power saving, dynamic spectrum utilization by Femtocells, and mitigation of sudden throughput degradation due to the serving cell’s downlink signal outage during mobility.
|
5 |
Using Receiver Squelch Techniques to Create Scalable Cellular Networks in Capacity Oriented IEEE 802.11 DeploymentsBlosco, John January 2006 (has links)
No description available.
|
6 |
PERFORMANCE OF FQPSK TRANSCEIVERS IN A COMPLEX REAL-LIFE INTERFERENCE ENVIRONMENTHaghdad, Mehdi, Feher, Kamilo 10 1900 (has links)
International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / The Bit Error Rate (BER) performance of FQPSK modulated signals in the presence of the Co-Channel
Interference (CCI) and Additive White Gaussian Noise (AWGN) is evaluated and improved. A Non-
Linearly Amplified (NLA) FQPSK modulated signal with the data rate of 1Mb/s and carrier frequency
of 70 MHz is interfered with a sinusoidal signal at different frequencies. As the relative distance of the
center frequency of the Co-channel interference (CCI) changes, different BER are obtained. The effect
of the CCI decreases as the CCI center frequency moves away from the center of the modulated signal.
In order to improve the BER in the presence of the CCI, a hard limited filter is added at the receiver
input. The hard limited filter has a different amplification factor for different signal strength. As a result,
the amplification factor for the CCI, which is normally a weaker signal, is smaller than the actual signal.
This means that the signal is amplified more than the interference and as a result the CCI is suppressed
and the BER rate improves. The results of both simulations and measurements are obtained for different
CCI center frequencies, before and after the improvements.
|
7 |
A Resource Allocation Method Base on Cross-Entropy Algorithm with Guaranteed QoS in Multi-Cell OFDMA SystemsHsiao, Shih-Lun 13 January 2012 (has links)
In multi-cell downlink OFDMA radio network system, users in one cell would suffer from the inter-cell interference caused by frequency reuse, namely co-channel interference. For a practical system, the inter-cell interference seriously decreases the quality of communication, especially for cell-edge users. Therefore, some interference management techniques, such as resources allocation, beamforming¡Ketc., will become an important issue in this system. Therefore, how to allocate resources to enhance cell-edge user performance and total system throughput is the major problem of our research.
In this thesis, for management the inter-cell interference in multi-cell downlink OFDMA radio network system, a power allocation method based on the Cross-Entropy algorithm is proposed to find the sub-optimal solution and corresponding subcarriers allocation. In the system, it is considered that a sum-rate maximization problem while satisfying the target rate of both cell-edge users and cell-interior users. The simulation results show that the proposed method can effectively reduce interference between cells, and increases the transmission performance of cell-edge users and overall system throughput.
|
8 |
Cognitive Access and Resource Allocation in Autonomous Femtocell NetworksYen, Leon Chung-Dai 31 December 2010 (has links)
Femto access points (FAP) are low-power cellular base stations that are designed to be autonomously deployed by customers indoors. Due to spectral scarcity, FAPs are expected to share spectrum with underlying macrocells. Closed access refers to the strategy where only Owners of the FAP are allowed access; whereas the FAP is open to everyone under Open access. Challenges such as dead zones or excessive signaling arise when implementing these two access strategies. Cognitive ac¬¬cess control is a hybrid approach that would have the FAP first senses the environment, prioritizes different classes of users, and then reserves a portion of femtocell radio resource for Owners while distributing the remaining to Visitors. Simulation results have shown that by utilizing the proposed Cognitive access control and reserve resource dynamically with the surrounding environment, both Macro-user and Owner throughputs will improve over the macrocell-only baseline, as well as both Closed and Open access strategies.
|
9 |
Cognitive Access and Resource Allocation in Autonomous Femtocell NetworksYen, Leon Chung-Dai 31 December 2010 (has links)
Femto access points (FAP) are low-power cellular base stations that are designed to be autonomously deployed by customers indoors. Due to spectral scarcity, FAPs are expected to share spectrum with underlying macrocells. Closed access refers to the strategy where only Owners of the FAP are allowed access; whereas the FAP is open to everyone under Open access. Challenges such as dead zones or excessive signaling arise when implementing these two access strategies. Cognitive ac¬¬cess control is a hybrid approach that would have the FAP first senses the environment, prioritizes different classes of users, and then reserves a portion of femtocell radio resource for Owners while distributing the remaining to Visitors. Simulation results have shown that by utilizing the proposed Cognitive access control and reserve resource dynamically with the surrounding environment, both Macro-user and Owner throughputs will improve over the macrocell-only baseline, as well as both Closed and Open access strategies.
|
10 |
Lessons Learned Constructing the NG-Mesh Wireless Test-BedNg, WK Stanley 10 1900 (has links)
<p>This thesis presents the lessons learned from building an IEEE 802.11 wireless mesh network (WMN) test-bed. Each network node consists of a Linux processor with multiple IEEE 802.11b/g transceivers operating in the 2.4 GHz band. Each transceiver consists of a medium access control (MAC) and base-band processor (BBP) in addition to a radio. A device driver was modified to control some of the key transceiver functions. The test-bed's Wi-Fi interfaces can be programmed to implement any mesh communication topology. All Wi-Fi interfaces use omni-directional antennas and the IEEE 802.11b operation mode.</p> <p>The test-bed design is easily extendable to incorporate newer Wi-Fi technologies. Measurements of co-channel interference in each Wi-Fi channel including received signal strength (RSS) and signal-to-interference-and-noise ratio (SINR) are presented. The AutoMin algorithm was developed in order to use the captured physical layer (PHY) metrics to avoid Wi-Fi congestion during test-bed operation. A comparison of a software-based spectrum analyzer to a commercial one is described. Key Wi-Fi functions in the Ralink driver source code are explored in depth. The compliance of the Ralink chip-set to the IEEE 802.11b spectral mask was verified. The maximum driver-induced retuning rate for the popular Ralink radio was found experimentally. This data can be used to optimize the performance of IEEE 802.11 WMNs.</p> / Master of Applied Science (MASc)
|
Page generated in 0.0282 seconds