>Magister Scientiae - MSc / Microfluidic paper based electrochemical sensing devices (μPEDs) provides a new way for point of care testing (POCT). μPEDs offer an inexpensive, portable, easy to use technology too monitor the environment and diagnose diseases, especially in developing countries in cases where there is not enough infrastructure and a limited trained medical and health professionals. The aim of this work is to develop a paper based electrode which can be further integrated into a microfluidic paper device to develop miniature point of care devices. Paper was used as a substrate for printing of the electrode because it is found everywhere, inexpensive and it is compatible with a number of chemical, biochemical and medical applications. Polyamic acid (PAA) was incorporated into commercial carbon ink and was used to print the working electrode. The first part of the study was conducted using the commercial screen printed carbon electrodes (SPCE) to study and understand the electrochemical behaviour of PAA. Cobalt nanoparticles and cobalt nanoparticles‐polyamic acid composites were electrochemically deposited onto SPCE. The modified electrodes were characterised using cyclic voltammetry. As synthesised polyamic acid were characterised using Scanning Electron Microscopy (SEM) to evaluate the morphology and chemical composition of polyamic acid. Transmission Electron Microscopy (TEM) was used to study the particle size and chemical composition of cobalt nanoparticles. Fourier Transform Infrared Spectroscopy (FTIR) was used to study the chemical nature of polyamic acid and cyclic voltammetry (CV) was used to study the electrochemical behaviour of polyamic acid and cobalt nanoparticle electrodes. The diffusion coefficients and formal potential of the electrodes were calculated. The modified and bare electrodes were also used to electrochemically detect Norfloxacin in an aqueous solution by CV and square wave voltammetry (SWV) and the analytical performance of the electrochemical systems are reported here. The obtained limit of detection for the bare SPCE was 3.7 x 10‐3 M and 14.7 x 10‐3 M for the PAA‐SPCE.

Cancer is a leading case of mortality worldwide. Governments spent multibillion expenses on treatment and palliative care of diseased people. Despite these generous funding and intensive research with aim to find a cure or efficient treatment for cancer, until now there is a lack in selective cancer management strategies. Conventional treatment strategies for cancer, such as surgery, cytotoxic chemotherapy, radiation therapy, hormone therapy don’t have selectivity toward cancer – the property of discrimination of healthy organs and tissues from the diseased site. Chemotherapy is very challenging as the difference between effective and lethal doses is very minuscule in most cases. Moreover, devastating side effects dramatically changes the quality of life for cancer patients. To address these issues two main strategies are intensively utilized in chemistry: (I) the design and synthesis of novel anticancer organic compounds with higher selectivity and low toxicity profiles and the second, design and preparation of biocompatible nanocarriers for imaging and anticancer compound selective delivery nanomedicine. The following dissertation combines the above two strategies as bellows: First project is related to the design and synthetic route development toward novel nature-inspired group of heterocyclic compounds – iso-Phidianidines. The second project focused on design, preparation and evaluation of hybrid theranostics (therapeutic and diagnostic in a single entity). Chapter 1 is a general background review of the major topics that will be discussed in this dissertation. The first efficient and high-yielding synthetic route toward iso-phidianidines, containing regioisomeric form of 1,2,4-oxadiazole linked to the indole via methylene bridge is reported in Chapter 2. In vitro test of the synthesized library of iso-phidianidines revealed micromolar range of cytotoxicity toward human cervical cancer cell line. Structure activity relationship revealed the importance of presence of monosubsituted amine in 3 position of oxadiazole to maintain activity. Moreover, gradual increase of activity was detected in increasing of the length of the diamine. Polyamine (spermidine) side chain demonstrated strongest anticancer activity, identified as lead compound and may be studied further as a good candidate for cervical cancer treatment. Finally, the remaining high activity of amino-terminated iso-phidianidines demonstrated that presence of guanidine group in termini is not necessary for high cytotoxicity. The second part of this dissertation (Chapter 3) discusses the rational design, wet protocol synthesis and complete characterization of the novel hybrid material – polydopamine coated iron-cobalt nanocubes (PDFCs). This material was loaded with anticancer model drug doxorubicin in one step procedure (PDFC-DOX) and the resulting drug-delivery vehicle was found to be successfully internalized by cervical cancer cells. The cytotoxicity test demonstrated inhibition of 50% of the cells at the concentration of 30μg/ml for PDFC-DOX. Moreover, the release was highly attenuated and pH-sensitive in acidic range. PDFC was also modified with fluorescein leading to green fluorescent nanoparticles PDFC-FITC, which demonstrated excellent intracellular molecular imaging property. PDFCs with one of the highest magnetic saturation among the materials used in biomedicine (226 emu/g based on core) showed the absence of any cytotoxicity in vitro and excellent MRI contrasting property (r2=186.44 mMs-1, higher than commercial contrast agents Ferridex® and Clio®), both in vitro and in vivo on mice. They were cleared out from the mice bodies in month without affecting their health. Due to the high density of core (8.3 g/cm3) they demonstrated ability to be contrast materials also for X-Ray CT diagnostic modality, increasing the tumor detection and visualization probability in combination with MRI. In addition to it’s diagnostic and drug-delivery modalities, PDFC was evaluated also for microwave-induced cytotoxicity as a novel concept in cancer treatment. As low as 10 μg/ml concentration of PDFCs in human cervical cancer cells caused extensive death above 73% upon exposure to 2,45 GHz of microwaves for one minute. Laser irradiation (808 nm, 15 minutes) of cancer cells with internalized PDFCs caused cell death above 60%. The specific absorption rate of PDFCs at 470 MHz frequency and 20 mT of the alternating magnetic field power was 180 W/g, which is nearly 100 W higher than for commercial nanoparticles (Ferridex®).

A library of graphene-based hybrid materials was synthesized as novel hybrid electrochemical electrodes for electrochemical energy conversion and storage devices and electrocatalytical sensing namely enzymeless glucose sensing. The materials used were supercapacitive graphene-family nanomaterials (multilayer graphene-MLG; graphene oxide-GO, chemically reduced GO-rGO and electrochemical reduced GOErGO) and pseudocapacitive nanostructured transition metal oxides including cobalt oxide polymorphs (CoO and Co3O4) and cobalt nanoparticles (CoNP). These were combined through physisorption, electrodeposition, and hydrothermal syntheses approaches. This project was carried out to enhance electrochemical performance and to develop electrocatalytic platforms by tailoring structural properties and desired interfaces. Particularly, electrodeposition and hydrothermal synthesis facilitate chemically-bridged (covalently- and electrostatically- anchored) interfaces and molecular anchoring of the constituents with tunable properties, allowing faster ion transport and increased accessible surface area for ion adsorption. The surface morphology, structure, crystallinity, and lattice vibrations of the hybrid materials were assessed using electron microscopy (scanning and transmission) combined with energy dispersive spectroscopy and selected-area electron diffraction, X-ray diffraction, and micro-Raman Spectroscopy. The electrochemical properties of these electrodes were evaluated in terms of supercapacitor cathodes and enzymeless glucose sensing platforms in various operating modes. They include cyclic voltammetry (CV), ac electrochemical impedance spectroscopy, charging-discharging, and scanning electrochemical microscopy (SECM). These hybrid samples showed heterogeneous transport behavior determining diffusion coefficient (4⨯10-8 – 6⨯10-6 m2/s) following an increasing order of CoO/MLG < Co3O4/MLG < Co3O4/rGOHT < CoO/ErGO < CoNP/MLG and delivering the maximum specific capacitance 450 F/g for CoO/ErGO and Co3O4/ rGOHT. In agreement with CV properties, these electrodes showed the highest values of low-frequency capacitance and lowest charge-discharge response (0.38 s – 4 s), which were determined from impedance spectroscopy. Additionally, through circuit simulation of experimental impedance data, RC circuit elements were derived. SECM served to investigate electrode/electrolyte interfaces occurring at the solid/liquid interface operating in feedback probe approach and imaging modes while monitoring and mapping the redox probe (re)activity behavior. As expected, the hybrids showed an improved electroactivity as compared to the cobalt oxides by themselves, highlighting the importance of the graphene support. These improvements are facilitated through molecular/chemical bridges obtained by electrodeposition as compared with the physical deposition.

The main goals of this research were to fabricate magnetic cobalt nanoparticles and study their structural, crystal structure, optical, and magnetic properties. Cobalt nanoparticles with average particle size 8.7 nm were fabricated by the method of high temperature reduction of cobalt salt utilizing trioctylphosphine as a surfactant, oleic acid as a stabilizer, and lithium triethylborohydride as a reducing reagent. Energy-dispersive X-ray spectroscopy (EDX) analysis confirmed the formation of cobalt nanoparticles. High resolution transmission electron microscopy images show that Co NPs form both HCP and FCC crystal structure. The blocking temperature of 7.6 nm Co NPs is 189 K. Above the blocking temperature, Co NPs are single domain and hence showed superparamagnetic behavior. Below the blocking temperature, Co NPs are ferromagnetic. Cobalt nanoparticles with a single-domain crystal structure support a sharp plasmon resonance at 280 nm. Iron nanoparticles with average particle size 4.8 nm were fabricated using chemical reduction method show plasmon resonance at 266 nm. Iron nanoparticles are ferromagnetic at 6 K and superparamagnetic at 300 K.

The confluence of intriguing size and morphology dependent optical and chemical properties with versatile application in various fields, such as energetic and magnetic makes monometallic nonmaterial of high fundamental scientific interest. However, the challenge that needs to be addressed is to achieve their synthesis with a rational control on their dimensions, morphology and dispersion for the widespread applications of these materials. In addition to synthesis, achieving long-lasting stability of nonmaterial becomes imperative in order to realize their potential applications. Miniaturization in size of particles results in an increased surface to volume ratio, conducing especially reactive metal nanoparticals prone to oxidation. This thesis describes the synthesis of nearly monodiperse colloids of metallic and intermetallic nanoparticles using solvated metal atom dispersion method and digestive ripening facilitated interatomic diffusion process. Our aim is to understand the combinatiorial effects of nanosizing and stability on the functional properties of these nanomaterials. Towards this Direction, we investigated Co, A1 and Mg monometallic, and Au/Ag-In and Au-Sn intermetallic nanoparticle systems. Chapter 2 Describes the synthesis, detailed characterizations and magnetic properties of nearly monodisperse cobolt nanoparticles(<5nm) synthesized using a hydride synthetic protocol, solvated metal atom diserion method. The as-prepared cobalt nanoparticles in this size range exhibit intrinsic instability towards Oxidations. After 30 day of exposure to air, magnetic measurements showed drastic degration in saturation magnetization and complete conversion to antiferromagnetic cobalt oxide was confirmed. In order to achieve their stability, a heat treatment was applied to decompose the organic solvent and capping agent, resulting in carbonization of solvent/ligand around the surface of cobolt nano particles. Controlled and optimized annealing at different temperatures resulted in the formation of hexagonal closed packed (hcp) and fape-centered cubic (fcc) phases of metallic cobalt. Remarkably, the corresponding heat treated samples retained their rich magnetic behavior even after exposure to air for a duration of one year. Compared to un-annealed samples, magnetization values increased two-fold and the corecivity of nanoparticles exhibited strong dependence on the phase transformation of cobolt. Chapter 3 Deal with an exploratory study of the synthesis, characterization, and stabilization of nanometer-sized enegetic material, aluminum. Highly monodisperse colloidal aluminum nanoparticles (3.1‡ 0.6 mm) were prepared by using hexadecy amine (HAD) as the capping agent tetrahydrofurma as a coordinating solvent in the SMAD method. Since such small particles are highly prone to oxidation, a support materials is required for their stabilization. Stability has been achived by carbonization of the capping agent on the surface of A1 nanoparticles by carrying out thermal treatment of A1-HAD nanoparticles at a modest temperature. Presence of corbon was confirmed using Raman spectroscopy and TEM measurements evidencing that annealed A1 nanoparticles are encapsulated in a corbon matrix. The exhibition of robust stability was established using thermal analysis (TGA/DTA) wherein, oxidation of aluminum in air did not occur upto 500 0C. Indirectly, the successful passivation was further exploited in the synthesis and characterization of small sized monodisperse magnesium nanoparticles. The resulting samples were hybrided and nanosized MgH2 released hydrogen at much lower temperature than that of the bulk MgH2 (573 K). The observed hydrogen release was only partially reversible. This partial reversibility could be attributed to the coalescence of small sized Mg nanoparticles upon subsequent charging/discharging hydrogen cycles. In the next step, we exploed the intermetallic systes which are composed of more than one metallic species. Chapter 4 describes the synthesis and characterization of small sized, monodisperse (<10 nm) colloidal AuIn2 and Ag3In intermetallic nanoparticles. The formation of intermetallic nanoparticles could be explained by invoking digestive ripening facilitated atomic diffusion of Au/Ag and In nanoparticles followed simultaneously by their growth in te solution. The course of the reaction was followed using optical spectroscopy where the changes in UV-visible absorption band were correlated to the formation of AuIn/Ag3In intermetallic. Structural characterization, Performed using powder X-ray diffraction, brought out the formation of phase pure AuIn2 and Ag3In intermetallic compounds. Digestive ripening effects were clearly observed using transmission electron microscopy which showed the transformation of polydisperse physical mixture colloid of nanometallic species to uniform sized intermetallic nanoparticles. By invoking the phenomenon of interatomic diffusion at nanoscale favored by feasible thermodynamics ( G being negative) we were successful inrealizing the formation of these intermetallic nanoparticles. Optimization of temperature at which digestive ripening was performed, turned out to be a crucial factor in the successful synthesis of phase pure intermetallic nanoparticles. These promising results inspired us to study further the preparation of Au-Sn intermetallic system which is described in Chapter 5. The potential of such an unprecedented approach has been exploited in the synthesis of homogeneous intermetallic nanaocrystals of Au5Sn and AuSn. The two monometallic collids (Au and Sn), mixed in a stoichiometric amount were subjected to digestive ripening process. 1:1 stichiometry always led to the formation of eutectic mixture (Au5Sn and AUSn), The stoichiometry of monometallic nanocrystals. Therefore, by taking an extra equivalent of Au and Sn in two different experiments, phase pure Au5Sn and AuSn intermatillic nanocrsytals were obtained, respectively. This is the first observation that has been reported regarding the phase pure synthesis if Au5Sn intermetallic nanocrystals using solution based approach. Formation of different phases was established by structural characterization which elicited srystalline nature of the samples. A combination of TEM, HRTEM, and STEM-EDS mapping techniques employed here, brought and tailored phase. In conclusion, the careful selection of solvent, stoichiometry and growth directing agents is an important prerequisite for realizing distinct phases of Au-Sn system with a controlled morphology.

No description available.