La demande en capacité liée à la transmission de tout type d’information (voix, vidéos, données, etc.) ne cesse de croître. Afin de répondre à cette demande croissante, de nouvelles générations de systèmes de communication multiplexés en longueur d’onde transmettant des débits élevés d’information par canal (100 Gbit/s ou plus) doivent être conçues. En plus des fibres ayant de très faibles pertes, des amplificateurs à fibre dopée à l’Erbium et du multiplexage en longueur d’onde, des technologies sont mises en place, comme notamment le multiplexage en polarisation, la détection cohérente, les formats de modulation multi-niveaux et plus récemment le multiplexage spatial. Des interrogations résident sur l’impact du multiplexage en polarisation ainsi qu’un développement vers des formats de modulation plus évolués incluant modulation de phase et multiplexage en polarisation. Dans cette thèse, afin de contribuer à l’augmentation du produit capacité x distance dans les systèmes de transmission Nx100 Gbit/s par fibre optique également multiplexés en polarisation et utilisant la détection cohérente, nous avons étudié d’une part, la mise en forme spectrale des signaux à l’émission pour augmenter la densité spectrale d’information (ISD: Information Spectral density). Dans cette optique, nous avons étudié l’impact du filtrage étroit gaussien du second ordre et de la mise en forme spectrale en racine de cosinus surélevé (RRC: Root Raised Cosine) sur les signaux émis dans le cas de modulations en Polarization Division Multiplexed-Quaternary Phase Shift Keying (PDM-QPSK) et Polarization-Switched-Quaternary Phase Shift Keying (PS-QPSK). Ceci a été réalisé en simulation numérique en considérant un espacement spectral entre les différents canaux variable. Nous avons montré qu’en tenant compte à la fois du facteur de qualité maximal et de la densité spectrale d’information, l’application de la mise en forme RRC sur des signaux modulés en PS-QPSK, fournit de meilleures performances de transmission dans une configuration où toute la dispersion est compensée en fin de propagation, pour toutes les valeurs d’espacement spectral étudiées. D’autre part, nous nous sommes intéressés aux effets non-linéaires qui limitent la portée de ces systèmes en dégradant pendant la propagation, les symboles émis, par les interactions entre des symboles d’un même canal, entre canaux ou modes de polarisation. La compréhension et la réduction de l’impact des effets non-linéaires est indispensable lorsqu’on veut utiliser certaines technologies pour augmenter la densité spectrale d’information. L’utilisation du multiplexage en polarisation par exemple, se heurte aux dégradations causées par les effets non-linéaires car de nouvelles interactions entre symboles sont présentes pendant la propagation. Par conséquent le développement des futurs systèmes ayant des débits plus élevés de 400 Gbit/s et 1 Tbit/s par canal passe par une diminution de l’impact des effets non-linéaires. Nous avons établi dans ce travail de thèse, des règles de conception permettant de réduire l’impact des effets non-linéaires entre polarisation dans les systèmes de transmission optiques considérés / The ever-increasing demand of capacity in very high bit rate coherent optical transmission systems has paved the way towards the investigation of several techniques such as the use of ultra-low loss fibers, Erbium doped fiber amplifiers, polarization and wavelength division multiplexing (WDM), coherent detection, multi-level modulation formats, spatial division multiplexing, etc. However, there are questions concerning polarization division multiplexing and a development towards some advanced modulation formats including phase modulation and polarization division multiplexing. In this thesis, in order to increase the capacity-by-distance product of future optical coherent systems using wavelength and polarization division multiplexing, we first study spectral shaping of the transmitted signals to increase the information spectral density. For this purpose, we have numerically investigated the multi-channel transmission performance of Polarization Switched Quadrature Phase Shift Keying (PSQPSK) and we have compared it to the performance of Polarization-Division-Multiplexed QPSK (PDM-QPSK), using Root Raised Cosine (RRC) spectral shaping, in the context of a flexible channel grid. In addition we have presented the advantage of PS-QPSK against PDM-QPSK as a function of the system parameters, while we have also discussed the benefit of a RRC spectral shaping against a tight filtering at the transmitter side with a 2nd order super-Gaussian-shaped filter. Furthermore, we have focused on nonlinear effects that limit the transmission distance by degrading the transmitted symbols during propagation. Analyzing and reducing the impact of nonlinear effects is essential when using technologies that increase the information spectral density such as polarization division multiplexing which causes new nonlinear effects due to additional interactions between symbols during the propagation through the fiber. Therefore a reduction of the impact of nonlinear effects is necessary for the development of future systems with higher bit rates of 400 Gbit/s and 1 Tbit/s per channel. We have established in this thesis, design rules to reduce the impact of nonlinear effects in the optical WDM transmission systems at 100 Gbit/s per channel that use polarization multiplexing

At the heart of high harmonic generation lies a combination of optical and collision physics entwined by a strong laser field. An electron, initially tunnel-ionized by the field, driven away then back in the continuum, finally recombines back to rest in its initial ground state via a radiative transition. The emitted attosecond (atto=10^-18) XUV light pulse carries all the information (polarization, amplitude and phase) about the photorecombination continuum-to-ground transition dipolar field. Photorecombination is related to the time-reversed photoionization process. In this perspective, high-harmonic spectroscopy extends well-established photoelectron spectroscopy, based on charged particle detection, to a fully coherent one, based on light characterization. The main achievement presented in this thesis is to use high harmonic generation to probe femtosecond (femto=10^-15) chemical dynamics for the first time. Thanks to the coherence imposed by the strong driving laser field, homodyne detection of attosecond pulses from excited molecules undergoing dynamics is achieved, the signal from unexcited molecules acting as the reference local oscillator. First, applying time-resolved high-harmonic spectroscopy to the photodissociation of a diatomic molecule, Br2 to Br + Br, allows us to follow the break of a chemical bond occurring in a few hundreds of femtoseconds. Second, extending it to a triatomic (NO2) lets us observe both the previously unseen (but predicted) early femtosecond conical intersection dynamics followed by the late picosecond statistical photodissociation taking place in the reaction NO2 to NO + O. Another important realization of this thesis is the development of a complementary technique to time-resolved high-harmonic spectroscopy called LAPIN, for Linked Attosecond Phase INterferometry. When combined together, time-resolved high-harmonic spectroscopy and LAPIN give access to the complex photorecombination dipole of aligned excited molecules. These achievements lay the basis for electron recollision tomographic imaging of a chemical reaction with unprecedented angstrom (1 angstrom= 0.1 nanometer) spatial resolution. Other contributions dedicated to the development of attosecond science and the generalization of high-harmonic spectroscopy as a novel, fully coherent molecular spectroscopy will also be presented in this thesis.

At a time where almost 1.75 billion people around the world use the Internet on a regular basis, optical communication over optical fibers that is used in long distance and high demand applications has to be capable of providing higher communication speed and re-liability. In recent years, strong demand is driving the dense wavelength division multip-lexing network upgrade from 10 Gb/s per channel to more spectrally-efficient 40 Gb/s or 100 Gb/s per wavelength channel, and beyond. The 100 Gb/s Ethernet is currently under standardization, and in a couple of years 1 Tb/s Ethernet is going to be standardized as well for different applications, such as the local area networks (LANs) and the wide area networks (WANs). The major concern about such high data rates is the degradation in the signal quality due to linear and non-linear impairments, in particular polarization mode dispersion (PMD) and intrachannel nonlinearities. Moreover, the higher speed transceivers are expensive, so the alternative approaches of achieving the required rates is preferably done using commercially available components operating at lower speeds.In this dissertation, different LDPC-coded modulation techniques are presented to offer a higher spectral efficiency and/or power efficiency, in addition to offering aggregate rates that can go up to 1Tb/s per wavelength. These modulation formats are based on the bit-interleaved coded modulation (BICM) and include: (i) three-dimensional LDPC-coded modulation using hybrid direct and coherent detection, (ii) multidimensional LDPC-coded modulation, (iii) subcarrier-multiplexed four-dimensional LDPC-coded modulation, (iv) hybrid subcarrier/amplitude/phase/polarization LDPC-coded modulation, and (v) iterative polar quantization based LDPC-coded modulation.

Currently deployed optical transmission systems use coherent detection for data rates of 40 Gb/s and 100 Gb/s. Quadrature phase shift keying (QPSK) modulation using four phase levels in combination with polarization division multiplexing (PDM) allows transmitting four bits per symbol. The use of more complex modulation formats, such as 16 level quadrature amplitude modulation (16QAM) allows increasing the data rate. However, this method reduces dramatically the transmission reach. For example, when passing from 100 Gb/s PDM-QPSK to 200 Gb/s PDM-16QAM, the reach is reduced by a factor of five. A new and disruptive approach in order to increase the capacity is mode division multiplexing (MDM), and this approach is investigated in the frame of my thesis. I start my thesis with some generalities on optical transmission systems followed by a presentation of their historical evolution against the background of the increasing capacity demand in the worldwide telecommunication networks. Afterwards I show some ways to continue the capacity growth in optical transmission systems before focusing on MDM. I describe the new key elements, notably the few-mode fiber and the few-mode amplifier, the mode-multiplexer / -demultiplexer and the new receiver system. I finish with a presentation of some experiments using entire MDM systems, which allowed us to be among the first research teams worldwide to realize a successful MDM transmission

A utilização, em sistemas de comunicações ópticas, de formatos de modulação digitais é vista, atualmente, como uma forma promissora de aumentar a eficiência espectral, frente aos diversos efeitos de degradação do sinal em fibra óptica, sem alterar a infraestrutura já implantada. É neste contexto que surge a técnica OFDM (orthogonal frequency division multiplexing) que estabelece sobreposição espectral das subportadoras e, desta forma, permite a transmissão dos dados em forma multiplexada com grande eficiência espectral. No presente trabalho, foi proposta a simulação da técnica OFDM com modulação QAM (quadrature amplitude modulation) no software Optisystem, versões 9.0 e 10.0. O objetivo principal da pesquisa é estudar algumas configurações de sistemas OFDM óptico, com detecção direta e coerente, visando avaliar seu desempenho sistêmico frente a efeitos de propagação. Usando as figuras de mérito BER e diagrama de constelação para estabelecer a meta de ótimo desempenho, analisamos a técnica OFDM com detecção coerente em configurações aplicáveis, principalmente, para redes ópticas de acesso com alcance estendido. Para validação dos resultados, são apresentados também estudos que relacionam as degradações do sinal em fibra óptica e a técnica OFDM. Estes resultados foram comparados com os existentes na literatura, apresentando boa concordância. / The development of digital modulation formats in optical communications systems is considered to be a promising way to increase the spectral efficiency and to combat the effects of signal degradation in optical fiber without changing the infrastructure already deployed. In this context, the technique called OFDM (orthogonal frequency division multiplexing) establishes a particular spectral overlap of the subcarriers, which allows data transmission to be multiplexed with high spectral efficiency. The main objective of the research is to study some configurations of optical OFDM systems with direct detection and coherent in order to evaluate their performance against propagation effects. Using the figures of merit BER and constellation diagram to establish the goal of optimal performance, we analyze the OFDM technique with coherent detection in configurations more applicable for optical access networks with extended reach. To validate the results we also present some studies that relate the degradation of the signal in an optical fiber and the OFDM technique. These results were compared with those described in literature, showing good agreement.

At the heart of high harmonic generation lies a combination of optical and collision physics entwined by a strong laser field. An electron, initially tunnel-ionized by the field, driven away then back in the continuum, finally recombines back to rest in its initial ground state via a radiative transition. The emitted attosecond (atto=10^-18) XUV light pulse carries all the information (polarization, amplitude and phase) about the photorecombination continuum-to-ground transition dipolar field. Photorecombination is related to the time-reversed photoionization process. In this perspective, high-harmonic spectroscopy extends well-established photoelectron spectroscopy, based on charged particle detection, to a fully coherent one, based on light characterization. The main achievement presented in this thesis is to use high harmonic generation to probe femtosecond (femto=10^-15) chemical dynamics for the first time. Thanks to the coherence imposed by the strong driving laser field, homodyne detection of attosecond pulses from excited molecules undergoing dynamics is achieved, the signal from unexcited molecules acting as the reference local oscillator. First, applying time-resolved high-harmonic spectroscopy to the photodissociation of a diatomic molecule, Br2 to Br + Br, allows us to follow the break of a chemical bond occurring in a few hundreds of femtoseconds. Second, extending it to a triatomic (NO2) lets us observe both the previously unseen (but predicted) early femtosecond conical intersection dynamics followed by the late picosecond statistical photodissociation taking place in the reaction NO2 to NO + O. Another important realization of this thesis is the development of a complementary technique to time-resolved high-harmonic spectroscopy called LAPIN, for Linked Attosecond Phase INterferometry. When combined together, time-resolved high-harmonic spectroscopy and LAPIN give access to the complex photorecombination dipole of aligned excited molecules. These achievements lay the basis for electron recollision tomographic imaging of a chemical reaction with unprecedented angstrom (1 angstrom= 0.1 nanometer) spatial resolution. Other contributions dedicated to the development of attosecond science and the generalization of high-harmonic spectroscopy as a novel, fully coherent molecular spectroscopy will also be presented in this thesis.

1.55-µm high-speed modelocked semiconductor lasers are theoretically and experimentally studied for various coherent photonic system applications. The modelocked semiconductor lasers (MSLs) are designed with high-speed (>5 GHz) external cavity configurations utilizing monolithic two-section curved semiconductor optical amplifiers. By exploiting the saturable absorber section of the monolithic device, passive or hybrid mode-locking techniques are used to generate short optical pulses with broadband optical frequency combs. Laser frequency stability is improved by applying the Pound-Drever-Hall (PDH) frequency stabilization technique to the MSLs. The improved laser performance after the frequency stabilization (a frequency drifting of less than 350 MHz), is extensively studied with respect to the laser linewidth (~ 3 MHz), the relative intensity noise (RIN) (< -150 dB/Hz), as well as the modal RIN (~ 3 dB reduction). MSL to MSL, and tunable laser to MSL synchronization is demonstrated by using a dual-mode injection technique and a modulation sideband injection technique, respectively. Dynamic locking behavior and locking bandwidth are experimentally and theoretically studied. Stable laser synchronization between two MSLs is demonstrated with an injection seed power on the order of a few microwatt. Several coherent heterodyne detections based on the synchronized MSL systems are demonstrated for applications in microwave photonic links and ultra-dense wavelength division multiplexing (UD-WDM) system. In addition, efficient coherent homodyne balanced receivers based on synchronized MSLs are developed and demonstrated for a spectrally phase-encoded optical CDMA (SPE-OCDMA) system.

Over the last decade, rapid growth of broadband services necessitated research aimed at increasing transmission capacity in fiber-optic communication systems. Wavelength division multiplexing (WDM) technology has been widely used in fiber-optic systems to fully utilize fiber transmission bandwidth. Among optical amplifiers for WDM transmission, semiconductor optical amplifier (SOA) is a promising candidate, thanks to its broad bandwidth, compact size, and low cost. In transmission systems using SOAs, due to their large noise figures, high signal launching powers are required to ensure reasonable optical signal-to-noise ratio of the received signals. Hence the SOAs are operated in the saturation region and the signals will suffer from SOA impairments including self-gain modulation, self-phase modulation, and inter channel crosstalk effects such as cross-gain modulation, cross-phase modulation, and four-wave mixing in WDM. One possibility to circumvent these nonlinear impairments is to use constant-intensity modulation format in the 1310 nm window where dispersion is also negligible. In this dissertation, differential phase-shift keying (DPSK) WDM transmission in the 1310 nm window using SOAs was first considered to increase the capacity of existing telecommunication network. A WDM transmission of 4 x 10 Gbit/s DPSK signals over 540 km standard single mode fiber (SSMF) using cascaded SOAs was demonstrated in a recirculating loop. In order to increase the transmission reach of such WDM systems, those SOA impairments must be compensated. To do so, an accurate model for quantum-dot (QD) SOA must be established. In this dissertation, the QD-SOA was modeled with the assumption of overall charge neutrality. Static gain was calculated. Optical modulation response and nonlinear phase noise were studied semi-analytically based on small-signal analysis. The quantitative studies show that an ultrafast gain recovery time of ~0.1 ps can be achieved when QD-SOAs are under high current injection, which leads to high saturation output power. However more nonlinear phase noise is induced when the QD-SOAs are used in the transmission systems operating at 10 Gbit/s or 40 Gbit/s. Electronic post-compensation for SOA impairments using coherent detection and digital signal processing (DSP) was investigated next in this dissertation. An on-off keying transmission over 100 km SSMF using three SOAs at 1.3 [micrometer] were demonstrated experimentally with direct detection and SOA impairment compensation. The data pattern effect of the signal was compensated effectively. Both optimum launching power and Q-factor were improved by 8 dB. For advanced modulation formats involving phase modulation or in transmission windows with large dispersion, coherent detection must be used and fiber impairments in WDM systems need to be compensated as well. The proposed fiber impairment compensation is based on digital backward propagation. The corresponding DSP implementation was described and the required calculations as well as system latency were derived. Finally joint SOA and fiber impairment compensations were experimentally demonstrated for an amplitude-phase-shift keying transmission.

Les systèmes de transmission optiques (STOs) déployés actuellement utilisent la détection cohérente pour les débits de 40 Gb/s et 100 Gb/s. Une modulation QPSK ( « Quadrature Phase Shift Keying »), c’est à dire avec 4 niveaux de phase, associée à un multiplexage de polarisation (« PDM » pour « Polarization Division Multiplexing ») permet de transporter 4 bits par symbole. L’utilisation des formats de modulation plus complexes, tels que le 16QAM (pour « Quadrature Amplitude Modulation »), avec 16 états possibles, permet d’augmenter le débit transmis. Cependant, cette méthode réduit fortement la portée de transmission. Par exemple, si on passe de 100 Gb/s PDM-QPSK à 200 Gb/s PDM-16QAM, la portée est réduite par un facteur cinq. Une approche nouvelle et en rupture afin d’augmenter la capacité est le multiplexage en mode (MDM, pour « Mode Division Multiplexing »). Cette approche est investiguée dans le cadre de ma thèse. Je commence ma thèse avec des généralités sur les STOs, suivi d’une présentation de leur évolution historique dans le contexte de la demande de capacité croissante dans les réseaux de télécommunications. Ensuite je montre plusieurs options pour continuer la croissance de capacité dans les STOs avant de me focaliser sur le MDM. Je décris tous les nouveaux éléments clés d’un système MDM typique, notamment la fibre et l’amplificateur légèrement multimodaux, le multiplexeur / démultiplexeur de modes et le nouveau système de réception, en me fondant sur des résultats théoriques, numériques et expérimentaux. Je termine avec une présentation des expériences de transmission MDM, où nous étions parmi les premières équipes mondiales à réaliser une telle démonstration / Currently deployed optical transmission systems use coherent detection for data rates of 40 Gb/s and 100 Gb/s. Quadrature phase shift keying (QPSK) modulation using four phase levels in combination with polarization division multiplexing (PDM) allows transmitting four bits per symbol. The use of more complex modulation formats, such as 16 level quadrature amplitude modulation (16QAM) allows increasing the data rate. However, this method reduces dramatically the transmission reach. For example, when passing from 100 Gb/s PDM-QPSK to 200 Gb/s PDM-16QAM, the reach is reduced by a factor of five. A new and disruptive approach in order to increase the capacity is mode division multiplexing (MDM), and this approach is investigated in the frame of my thesis. I start my thesis with some generalities on optical transmission systems followed by a presentation of their historical evolution against the background of the increasing capacity demand in the worldwide telecommunication networks. Afterwards I show some ways to continue the capacity growth in optical transmission systems before focusing on MDM. I describe the new key elements, notably the few-mode fiber and the few-mode amplifier, the mode-multiplexer / -demultiplexer and the new receiver system. I finish with a presentation of some experiments using entire MDM systems, which allowed us to be among the first research teams worldwide to realize a successful MDM transmission

The objective of this research work is to develop reliable and power-efficient synchronization algorithms for continuous phase modulation (CPM). CPM is a bandwidth and power efficient signaling scheme suitable for wireless and mobile communications. Binary CPM schemes have been widely used in many commercial and military systems. CPM with multilevel symbol inputs, i.e., M-ary CPM, can achieve a higher data rate than binary CPM. However, the use of M-ary CPM has been limited due to receiver complexity and synchronization problems. In the last decade, serially concatenated CPM (SCCPM) has drawn more attention since this turbo-like coded scheme can achieve near Shannon-limit performance by performing iterative demodulation/decoding. Note that SCCPM typically operates at a low signal-to-noise ratio, which makes reliable and power-efficient synchronization more challenging. In this thesis, we propose a novel timing and phase recovery technique for CPM. Compared to existing maximum-likelihood estimators, the proposed data-aided synchronizer can achieve a better acquisition performance when a preamble is short or channel model errors are present. We also propose a novel adaptive soft-input soft-output (A-SISO) module for iterative detection with parameter uncertainty. In contrast to the existing A-SISO algorithms using linear prediction, the parameter estimation in the proposed structure is performed in a more general least-squares sense. Based on this scheme, a family of fixed-interval A-SISO algorithms are utilized to implement blind iterative phase synchronization for SCCPM. Moreover, the convergence characteristics of iterative phase synchronization and detection are analyzed by means of density evolution. Particularly, an oscillatory convergence behavior is observed when cycle slips occur during phase tracking. In order to reduce performance degradation due to this convergence fluctuation, design issues, including delay depth of the proposed algorithms, iteration-stopping criteria and interleaver size, are also discussed. Finally, for completeness of the study on phase synchronization, we investigate the error probability performance of noncoherently detected full-response CPM, which does not require channel (or phase) estimation.