<p>A magnetostrictive material elongates when it is subjected to a magnetic field. This effect can then be used to design powerful actuators. The department of electromagnetic engineering has been working with magnetostricitve material and their applications since the 1980s and is presently engaged in a project focusing on magnetostrictive transducer utilisation for the aeronautic field.</p><p>The focus of the presented work has been to develop and improve methods and tools supporting the development of magnetostrictive actuators.</p><p>The axial-radial model was previously developed at the department and is well suited for circular cross sections of magnetostrictive rods. It is, however, common to laminate the magnetostrictive rods resulting in rectangular cross sections. The use of Cauer circuits allows modelling of the shielding effect. This shielding effect results in non-homogenous magnetisation and stress in both rectangular and circular cross sections of the rod. A model based on Cauer circuits, including a hysteresis model based on experimental data, was developed during the project. Furthermore, it is demonstrated how figures of merit and the use of finite element methods can be used to find optimised designs in a systematic and computational efficient way. The<i> modified generalised Fabry factor</i> <i>and the magnetisation inhomogeneity coefficient</i> are two proposed new figures of merit.</p><p>A Magnetostricitve material is characterised through an experimental procedure. Usually, magnetostrictive material exhibit large hysteresis. An important part of the material characterisation is the post-processing of the measurement data, including a de-hysterisation procedure. In the thesis, a de-hysterisation method which ensures energy consistent data is presented. Energy consistent material data is essential to achieve energy consistent simulations of magnetostrictive systems.</p><p>It is also demonstrated how the knowledge at the department can be utilised in international projects. In an ongoing project, the department is engaged in two sub tasks. In one of these sub tasks a high torque actuator is to be developed for the helicopter industry. The developed magnetostrictive models are used to perform system simulations of such actuator systems. In the other sub task a device for power harvesting from vibrations is analysed. It has now been shown how to adapt the load impedance in order to extract maximal electric power from the device.</p>

A magnetostrictive material elongates when it is subjected to a magnetic field. This effect can then be used to design powerful actuators. The department of electromagnetic engineering has been working with magnetostricitve material and their applications since the 1980s and is presently engaged in a project focusing on magnetostrictive transducer utilisation for the aeronautic field. The focus of the presented work has been to develop and improve methods and tools supporting the development of magnetostrictive actuators. The axial-radial model was previously developed at the department and is well suited for circular cross sections of magnetostrictive rods. It is, however, common to laminate the magnetostrictive rods resulting in rectangular cross sections. The use of Cauer circuits allows modelling of the shielding effect. This shielding effect results in non-homogenous magnetisation and stress in both rectangular and circular cross sections of the rod. A model based on Cauer circuits, including a hysteresis model based on experimental data, was developed during the project. Furthermore, it is demonstrated how figures of merit and the use of finite element methods can be used to find optimised designs in a systematic and computational efficient way. The modified generalised Fabry factor and the magnetisation inhomogeneity coefficient are two proposed new figures of merit. A Magnetostricitve material is characterised through an experimental procedure. Usually, magnetostrictive material exhibit large hysteresis. An important part of the material characterisation is the post-processing of the measurement data, including a de-hysterisation procedure. In the thesis, a de-hysterisation method which ensures energy consistent data is presented. Energy consistent material data is essential to achieve energy consistent simulations of magnetostrictive systems. It is also demonstrated how the knowledge at the department can be utilised in international projects. In an ongoing project, the department is engaged in two sub tasks. In one of these sub tasks a high torque actuator is to be developed for the helicopter industry. The developed magnetostrictive models are used to perform system simulations of such actuator systems. In the other sub task a device for power harvesting from vibrations is analysed. It has now been shown how to adapt the load impedance in order to extract maximal electric power from the device. / QC 20101115