Thesis (Ph. D.)--Rutgers University, 2008. / "Graduate Program in Public Health." Includes bibliographical references.

Orientador: João Andrade de Carvalho / Resumo: Caldeiras de produção de vapor são utilizadas no setor siderúrgico para produzir e disponibilizar vapor para o processo de geração de energia e para os vários setores que necessitam de aquecimento durante a fabricação de seus produtos, como por exemplo, a vaporização de criogênicos para distribuição na planta. Portanto, caldeiras são equipamentos que necessitam ter confiabilidade. Atualmente, a CSN (siderúrgica brasileira de grande porte) possui duas caldeiras do início da década de 80 que somente partem e operam com uma chama piloto utilizando gás de coqueria, um gás que é subproduto da produção de coque em uma planta siderúrgica. Assim, para alcançar o objetivo de mais confiabilidade e flexibilidade na operação destas caldeiras, utilizou-se os métodos de índice Wobbe, corrigido pela pressão, e o método dos múltiplos índices de Weaver para avaliar a substituição do gás de coqueria pelo gás natural de modo que estas caldeiras possam operar com gás natural em caso de indisponibilidade de gás de coqueria. Mesmo que o aporte energético entre os gases seja diferente, este pode ser ajustado pela pressão do gás. A temperatura de chama adiabática não tem variação significativa, reduzindo-se apenas 1,4%. As emissões de fumaças e CO2 aumentam com a substituição, porém as emissões de NOx tem redução. A utilização do método dos múltiplos índices de Weaver para análise de intercambiabilidade demonstra que o gás natural não é um substituo para um queimador projetado para queimar gás de co... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: Steam generators are used in the steel industry to produce and supply steam process for power generation and for other sectors that need heat to manufacture their products, such as the cryogenics vaporization for distribution in the facilities. Therefore, steam generators are equipment that need to have reliability. Currently, CSN (large Brazilian steelmaker) has two steam generators from the early 1980s that only startup and operate with a pilot flame using coke oven gas, a gas that is a byproduct of coke production at a steel plant. Thus, in order to achieve the working objective, reliability and flexibility in the operation of these steam generators, the Wobbe index method, with pressure-corrected, and the Weaver's multiple index method were used to verify the coke oven replacement for natural gas, and then, these steam generators can operate with natural gas in case of coke oven gas unavailability. Results shown in the same way that the energy increase between the gases are different can be adjusted in the pressure reduction. The flame temperature has insignificant variation, only 1.4%. Off gas and CO2 emissions increase with interchangeability. However, NOx emissions are reduced. The Weaver multiple index method for interchangeability analysis demonstrates that natural gas is not a gas to replace coke oven gas in a burner designed to burn coke oven gas, but if the burner is designed to natural gas, coke oven gas may be the substitute gas. Regarding the heat input and pri... (Complete abstract click electronic access below) / Mestre

The topic of this diploma thesis is to design the co-firing of blast furnace gas and coke-oven gas. First, the stoichiometric calculation for the gas mixture was made. It is followed with the determination of basic measures of heating surfaces and with their thermal calculation. The part of the work is also the drawing documentation of the boiler.

The steel manufacturing industry is one of the largest emitters of CO2, accounting for upwards of 8.8% of all anthropogenic CO2 emissions. The governments are charging taxes on CO2 emissions, which incentivize the industry to further reduce CO2 emissions. At present, much of the CO2, produced in the steel manufacturing process occurs as a result of coke oven and blast furnace gas by-products. As such, two major strategies have been proposed to reduce steel-manufacturing-related CO2 emissions: producing more electricity via optimized combined cycle power plants (CCPP), and converting off-gas by-products into methanol (CBMeOH). The present research consists of an economic and environmental analysis of the status quo, CCPP, and CBMeOH systems for five locations: Ontario, the USA, Finland, Mexico, and China. The economic analysis considered factors such as carbon tax, electricity price, methanol price, electricity carbon intensity, power purchasing parity, and income tax. In the CCPP process, desulphurization is conducted using ProMax with MDEA as the solvent, while the CBMeOH process uses a membrane to separate the bulk H2S, with organic sulfurs such as thiophene being removed via CO2+steam reforming and middle-temperature removal. The results of the economic analysis revealed the CBMeOH plant to be the most profitable in Ontario, the USA, China, and Mexico, while the CCPP system was shown to be the most profitable in Finland. The environmental analysis was conducted using the TRACI, CML-IA, ReCiPe2016, and IMPACT2002+ tools in SimaPro V9, with the results showing the CBMeOH system to be the most environmentally option in Ontario, Finland, and China, and the CCPP system as the most environmentally friendly option in the USA and Mexico. / Dissertation / Doctor of Philosophy (PhD)

The diploma thesis deals with design of gas steam boiler with given parameters of steam. Blast furnace and coke oven gas are used as fuel. At the beginning of this work, both co-fired fuels are presented to us, their chemical analysis and stoichiometry are performed. The main part of the diploma thesis deals with the dimensioning of individual heat exchange surfaces such as steam superheaters, evaporators, economizers and air heaters. All heat exchange surfaces meet recommended parameters such as recommended steam rates, flue gas, etc. At the end, the total heat balance of the boiler is performed. Part of the work is also drawing documentation showing the main dimensions of the boiler. It is also indicated the connection of individual heat exchange surfaces.