Ces travaux de thèse concernent le développement de combineur de puissance faibles pertes et compact selon une architecture planaire pour des applications amplificateur de forte puissance à état solide en bande X. La conception du combineur de puissance s’appuie sur l’étude de structures multicouches faibles pertes et compactes en triplaque à air suspendu. Une étude électromagnétique et thermique est proposée pour déterminer les performances de ces structures de transmission dans la bande X. Un système de refroidissement est également mis en place pour permettre aux structures de transmission de tenir des puissances moyenne de l’ordre de 50 W. La réalisation et la caractérisation de ces structures triplaques à air ont permis de démontrer les caractéristiques de faibles pertes et de compacité de ces circuits imprimés. Cette technologie triplaque à air suspendue est alors compatible pour des applications de forte puissance comme les émetteurs à état solide. / This PhD thesis deals with planar architecture design development of low loss and compact power combiner for solid-state high power amplification in X-band. The design is based on the study of innovative multilayer air dielectric stripline transmission structures. A reliable printed circuit process allows to obtain low loss, compact and replicable stripline structures. Electromagnetic FEM and thermal studies are proposed to evaluate transmission structures performances in X-band. Two compact and scalable structures were developed and may be integrated into complex multilayer systems. Finally a cooling system with periodic ceramic contacts is developed to improve the power handling capability of these stripline structures up to 50 W. The study, development and benchmark of these stripline structures demonstrated their compactness and low loss behaviour. Ultimately, these attributes make them excellent candidates for high power solid-state emitters.

The aim of this work was double-balanced mixer implementation, which will be used like laboratory equipment. This thesis deals with design of the double-balanced mixer from first theoretical principles to a practical design of a laboratory equipment. For the practical design the integrated mixer SA612 was used. Input signal to the mixer up to 500 MHz frequency can be used. For required operation external oscillator and fifth-order low pass filter were constructed. Oscillator was designed for fixed frequency 32 MHz. Fifth-order low pass filter was inserted between the mixer and the oscillator, because of filtering higher harmonics. The second aim of the work was measuring double-balanced mixer basic parameters, such as Compression Point (P-1dB) and Intercept Point (IP3). For the IP3 measurement, another one device was required. It consists of the power combiner for mixing two frequency close signals and third-order bandpass filter, which selects required frequency band. Finally, the laboratory equipment was fabricated and its real parameters were measured.