The subject of the diploma thesis is an architectural study of a velodrome in Brno Komárov. It is an indoor cycling track which is still missing in the Czech Republic. The whole site of the Hněvkovského sports complex in Komárov was elaborated within the architectural study. The aim of the proposal was to attract a wide range of visitors to the site, so not only buildings for sports were designed. But also two sets of buildings as a modular construction from containers providing premises for rent. The construction of the velodrome was deign as a combination of monolithic reinforced concrete and steel truss structure. The cladding is design from insulated panel system.

The aim of the diploma thesis is to construct a steel shopping mall hall. The construction is located in Frýdek-Místek. The whole object can be divided in two parts. One part of the building is an atrium with a cross bridge made from glass. The roof construction of the atrium is designed as system of cylindrical lattice girders within purlins are set up. The other part of the construction is multistoried shopping mall with terrace designed as composite steel and concrete structure. The whole ground plan size of the construction is 72 m x 120 m. The height of the construction above the ground is 12.06 m. The cross-links are built up to 6 m one. There were created two versions of the construction. The most convenient version is described in more details. The outcome of the thesis is a comparison of two above mentioned versions. The whole project is based on officially recognised standard ČSN EN. The construction was designed in RFEM programme.

The diploma thesis deals with design of structural system of selected parts of load-bearing structure of car park – common floor slab, selected columns, staircase. The Finite Element Method software is used to analyse the load-bearing structure, the results are verified by simlyfied hand-done calculation. The design of structures is done according to valid standards.

Designed children´s sanatorium is situated on the cadastral area of Ostrova u Macochy town, in the protected area of Moravsky Kras. The architecture of this building fits in the surroundings of the landscape and respects its features. The building main attributes are its south-facing slope, the compositional construction from prefabricated reinforced concrete structure and perimeter sandwich structure, as well as the massive insulation. Thanks to these characteristics, it is classified as energy-efficient building. These eight buildings, interconnected by the massive colonnade in its middle axis, force the user to take advantage of all its energy-efficient advantages.

The aim of this diploma thesis is the processing of selected parts of the construction technology project for the New office and manufacturing building of GRADIOR TECH a.s. The building is located in the Královopolská industrial park in Brno - Královo pole. The construction is divided into 6 buildings. The indicative time and financial plan focuses on the building as a whole. Furthermore, the diploma thesis focuses in detail on the construction technology project project in detail on the building of the office building, which is based on drilled piles. On these piles, the cup feet for pillar fitting are placed on which the beams are fitted together with frames and ceiling panels. The building is diverse and contains both prefabricated and monolithic structures.

The object of the diploma thesis is the design and the assessment of the steel structure for rally team base in Napajedla, which contains the space for the administration and the space for the service hall. The overall ground plan proportions of the structure are 30 x 26 metres. The structure for administration is the four-storey building. The ground plan proportions of this structure are 30 x 12 metres and the height is 14.5 metres. The ground floor grid of the main load-bearing structure is 6 x 6 metres. The height of the one floor of the structure is 3.5 metres. The structure of ceilings and roof is designed like composite steel and concrete structure. All joints of the steel structure for administration are designed like bolted joints. The spatial rigidity of the structure is ensured by vertical wall truss bracings and by the rigidity of composite steel and concrete structure of ceillings and roof. To the structure for the administration is connected structure for the service hall. The ground plan proportions of this structure are 30 x 14 metres and the height is 10.5 metres. The main structure of the structure for service hall is frame with the rigid joint in the corner of the frame. The axial distance of the main structures is 6 metres. All joints including the rigid joint in the corner of the frame of the steel structure for service hall are designed like bolted joints. The spatial rigidity of the structure is ensured by vertical wall truss bracings and horizontal roof truss bracings. The whole structure is designed of steel S355.

The subject of the diploma thesis is an architectural study of the forecourt of the Dukovany Nuclear Power Station. The project is based on a pre-diploma project which aimed to develop an urban concept. At the moment the buildings in the area are in an unsuitable condition from a construction - technical and architectural perspective. The urban-architectural study was intended to create a new concept for the forecourt and simultaneously enable its efficient operation in case of the completion of a new nuclear unit. The concept of the solution is based on the removal of outdated buildings and their replacement with new buildings which will meet the current requirements of the Dukovany Nuclear Power Station. From the current layout the main roads, the gatehouse, the information center and the greenery will be preserved. After removing the selected buildings, the renovation area will be divided into the main axes on which the main road network will be designed. The unsuitable connection to public road infrastructure will be solved by minimizing the entrances to the area to two entrances and by moving the suburban bus station from the main road. After connecting the whole area by roads, the area will be divided into functional areas. In front of the gatehouse there will be a square surrounded by public services, an administrative building and by the preserved information center building. From this space, the main representative space of the entire complex will be created. Warehouses and workshops will be located behind the square. Transport areas will be located at the rear of the complex. Thanks to this location, there will be a good connection with the current factory and also with the planned completion of the new nuclear unit on the west of the area. There will also be educational and sport facilities in the complex. The kindergarten will be oriented towards the preserved greenery.

The study design includes a main directorate of the Grand Prix Brno. There are spaces designed for administration (office management circuit, meeting room, secretarial services, tec.), riders (relaxation room, garage), the commissioner and start providemaintenance and safe operation of the circuit, VIP lounges and media hall. Building is an oval dynamic shape, created of steel construction and skeleton with light cladding combined with fresh glass facade. Central part of object is designed in main axis of autodrome. Functional change in solved area was constituted by creating a corridor between main entrance into an areal, used by public. This corridor was connected with driveway to paddocks. The proposal is designed to meet safety criteria, but also manager to evoke good atmosphere of racers and visitors.

The purpose of this thesis is to study behaving of thin reinforced concrete shell structure with a huge span which overcomes two hundred meters. The main goal is to find an ideal shape of such structure to ensure only compression without bending tension which allows us to cover huge area with a very thin shell. For solution of internal forces was used the finite elemet method (ANSYS).The blueprints of shape of this shell are the part of this project.

The subject of the diploma thesis is to design a new building of sports facilities at the documentation for building construction. The design emphasizes the layout, including the provision of structures for the static, architectural, fire safety, energy savings and safety while using the object. The work contains text and graphic part. The graphic part is processed in the ArchiCad.