published_or_final_version / Civil Engineering / Doctoral / Doctor of Philosophy

Typescript (photocopy). / Digitized by Kansas Correctional Industries

No description available.

published_or_final_version / Civil Engineering / Doctoral / Doctor of Philosophy

Typescript (photocopy). / Digitized by Kansas Correctional Industries

The Environmental Conditioning System (ECS) was designed to evaluate the water sensitivity of asphalt concrete mixtures. The ECS subjects asphalt concrete specimens to a series of conditioning cycles including water flow, elevated and/or lowered temperature, and repeated axial loading. The purpose of this research was to: (1) evaluate the ECS test apparatus and procedure, and (2) determine whether the ECS can identify asphalt concrete mixtures that will perform well, or poorly, in the field with regard to water sensitivity. Twelve primary field test sections were identified. For each section, specimens were prepared in the laboratory using the original mix design (or the mix design identified by extraction), and the original aggregates, asphalts, and admixtures. Specimens were tested using two procedures: the ECS and the Oregon State University (OSU) wheel tracker. Field cores were used to evaluate in-situ mixture performance. Nine additional mixtures that have historically experienced water damage were tested in a limited secondary test program. Analyses were performed to determine the mixture properties that were significant in the prediction of mixture performance in the ECS. Mixture type was consistently the most significant predictor of ECS modulus ratio (change in mixture stiffness), degree of visual stripping, and binder migration, which were the performance indicators for water sensitivity evaluated in the ECS. Additional analysis indicated the existence of correlations among the ECS response variables. Significant correlations were found between the coefficient of water permeability and the degree of visual stripping; and between specimen deformation and the degree of visual stripping and binder migration. Mixture performance was compared between the ECS and the OSU wheel tracker and the field. Results indicate that the ECS test procedure can distinguish the relative performance of mixtures, with regard to water sensitivity, and mixture performance in the ECS correlates well with performance in the OSU wheel tracker. No correlation was found between mixture performance in the ECS and mixture performance in the field for the primary test sections. However, the primary field sections are relatively young, and water damage is expected to manifest itself in the future in those pavements identified as water sensitive by the ECS. The ECS predicted failure in the secondary mixtures which were identified as having had poor performance with regard to water sensitivity. / Graduation date: 1994

Various national and international standards recommend potable water for mixing concrete; however, the availability of potable water is virtually a daunting task in some developing communities. Concrete workers in such environments tend to utilize any available water for mixing concrete, and this may be detrimental to the quality of the concrete being produced. This study investigates the rheological, mineralogical and strength variability of concrete due to construction water impurities. Water samples were collected from four different construction sites within Southwestern region of Nigeria for production of concrete. The physical and chemical properties of the waters were determined so as to measure their rate of contamination, prior to their use for mixing concrete. The rheological properties of the fresh concrete, compressive strength, split tensile strength, and microscale features of hardened concrete, that were produced with each water sample were determined. From the results, the rheological features of concrete were found not to be affected by water impurities, however, the mechanical test results revealed about 10% reduction in strength between concrete made with water having least and higher concentration of impurities. Also, it was evident from the microscale tests that the water impurities do alter the hydration rate of concrete, which results in strength reduction. The study suggests pretreatment of concrete mixing water before use in order to avoid its damaging effect on concrete life. / Revisión por pares

This research is aimed at investigating the corrosion durability of polyolefin fiber-reinforced fly ash-based geopolymer structural concrete (hereafter referred to as GPC, in contradistinction to unreinforced geopolymer concrete referred to as simply geopolymer concrete), where cement is completely replaced by fly ash, that is activated by alkalis, sodium hydroxide and sodium silicate. The durability in a marine environment is tested through an electrochemical method for accelerated corrosion. The GPC achieved compressive strengths in excess of 6,000 psi. Fiber reinforced beams contained polyolefin fibers in the amounts of 0.1%, 0.3%, and 0.5% by volume. After being subjected to corrosion damage, the GPC beams were analyzed through a method of crack scoring, steel mass loss, and residual flexural strength testing. Fiber reinforced GPC beams showed greater resistance to corrosion damage with higher residual flexural strength. This makes GPC an attractive material for use in submerged marine structures. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2013.

The construction industry is increasingly turning to the use of environmentally friendly materials in order to meet the sustainable aspect required by modern infrastructures. Consequently, for the last two decades, the expansion of this concept, and the increasing global warming have raised concerns on the extensive use of Portland cement due to the high amount of carbon dioxide gas associated with its production. The development of geopolymer concretes offers promising signs for a change in the way of producing concrete. However, to seriously consider geopolymer binders as an alternative to ordinary Portland cement, the durability of this new material should be evaluated in any comparative analysis. The main purpose of this study was to evaluate the durability characteristics of low calcium fly ash-based geopolymer concretes subjected to the marine environment, compared to ordinary Portland cement concrete with similar exposure. To achieve this goal, 8 molar geopolymer, 14 molar geopolymer and ordinary Portland cement concrete mixes were prepared and tested for exposure in seawater. Compressive strengths in the range of 2900 to 8700 psi (20-60 MPa) were obtained. The corrosion resistance performance of steel-reinforced concrete beams, made of these mixes, was also studied, using an accelerated electrochemical method, with submergence in salt water. The test results indicated that the geopolymer concrete showed excellent resistance to chloride attack, with longer time to corrosion cracking, compared to ordinary Portland cement concrete. / by Jean-Baptiste Edouard. / Thesis (M.S.C.S.)--Florida Atlantic University, 2011. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2011. Mode of access: World Wide Web.

Ultra-high performance concrete (UHPC) is relatively a new generation of concretes optimized at the nano and micro-scales to provide superior mechanical and durability properties compared to conventional and high performance concretes. Improvements in UHPC are achieved through: limiting the water-to-cementitious materials ratio (i.e., w/cm < 0.20), optimizing particle packing, eliminating coarse aggregate, using specialized materials, and implementing high temperature and high pressure curing regimes. In addition, and randomly dispersed and short fibers are typically added to enhance the material¡¦s tensile and flexural strength, ductility, and toughness. There is a specific interest in using UHPC for precast prestressed bridge girders because it has the potential to reduce maintenance costs associated with steel and conventional concrete girders, replace functionally obsolete or structurally deficient steel girders without increasing the weight or the depth of the girder, and increase bridge durability to between 75 and 100 years. UHPC girder construction differs from that of conventional reinforced concrete in that UHPC may not need transverse reinforcement due to the high tensile and shear strengths of the material. Before bridge designers specify such girders without using shear reinforcement, the long-term tensile performance of the material must be characterized. This multi-scale study provided new data and understanding of the long-term tensile performance of UHPC by assessing the effect of thermal treatment, fiber content, and stress level on the tensile creep in a large-scale study, and by characterizing the fiber-cementitious matrix interface at different curing regimes through nanoindentation and scanning electron microscopy (SEM) in a nano/micro-scale study. Tensile creep of UHPC was more sensitive to investigated parameters than tensile strength. Thermal treatment decreased tensile creep by about 60% after 1 year. Results suggested the possibility of achieving satisfactory microstructural refinement at the same temperature input despite the maximum temperature applied. For the first time, the presence of a 10 Ým (394 micro inch) wide porous fiber-cementitious matrix interface was demonstrated by nanoindentation and SEM for non-thermally treated UHPC only. Tensile creep at 90 days increased by 64% and 46% upon eliminating fibers for thermally and non-thermally treated UHPC, respectively. Increases in creep upon reducing the fiber content suggested that fibers carry part of the sustained load and thus reduce creep. Tensile creep strain was proportional to the stress applied up to 60% of the ultimate strength. No tensile creep failure occurred for a period of 1 year for pre-cracked UHPC under stress level of 40%. Also, no tensile creep failure occurred for a period of 90 days under stress level of 60%. Tensile creep failure occurred at stress levels of 70% and 80%. This study showed that fibers cannot be accounted for as shear reinforcement in lieu of stirrups unless micro-defect-free fiber-matrix interface is achieved.