Spelling suggestions: "subject:"one genetration test"" "subject:"one genetration est""
1 |
On the steady-state flow of an elastic-plastic material past cones and wedgesTaskinen, Timo I. January 1999 (has links)
No description available.
|
2 |
Post processing of cone penetration data for assessing seismic ground hazards, with application to the New Madrid seismic zoneLiao, Tianfei 17 May 2005 (has links)
The seismic cone penetration test (SCPTu) is the most efficient means for geotechnical site characterization and the evaluation of seismic ground hazards. In this thesis, software systems including ShearPro, ClusterPro, and InSituData, are developed to automate post processing of these SCPTu data. ShearPro is developed to automate the post-processing of the shear wave signals. ClusterPro uses the proposed three-dimensional cluster analysis approach for soil stratification. InSituData facilitates the post processing of penetration data for seismic ground hazards analysis. A new three-dimensional soil classification chart is also proposed in this thesis to help discern soil layers that may be subject to seismic ground hazards, such as loose liquefied sands and silty sands.
These methods are then applied to SCPTu data collected at previously-identifed paleoliquefaction sites located in the New Madrid Seismic Zone (NMSZ). For liquefaction evaluation, the cyclic stress ratio (CSR) is computed using site response analysis by DeepSoil and a measured profile of shear waves derived from the 30-m SCPTU soundings and deep suspension loggings in AR and TN. The natural resistance of the soil to liquefaction, termed the cyclic resistance ratios (CRRs), is evaluated based on both deterministic procedures and probabilistic procedures. Based on liquefaction evaluation results at selected paleoliquefaction sites, regional CRR criteria for liquefaction are developed for the NMSZ. As even the latest major earthquakes in NMSZ occurred nearly 200 years ago, aging effects might be an important factor to consider in utilizing the liquefaction criteria to assess the seismic parameters associated with the previous earthquakes. The aging effects in the NMSZ were investigated through large scale blast-induced liquefaction tests conducted in the NMSZ. Then a procedure to estimate seismic parameters associated with previous earthquakes is proposed. It utilizes both the liquefaction criteria based on SCPTu tests and the empirical attenuation relations developed for the corresponding regions. The approach is validated through data evaluation related to the 1989 Loma Prieta earthquakes in California and then applied to previous historic earthquakes in the NMSZ.
|
3 |
Field and laboratory studies of the behavior of spread footing for highway bridge construction (HAM-32-0.14)Payoongwong, Chatchawahn January 1997 (has links)
No description available.
|
4 |
Development of a Performance-Based Procedure to Predict Liquefaction-Induced Free-Field Settlements for the Cone Penetration TestHatch, Mikayla Son 01 June 2017 (has links)
Liquefaction-induced settlements can cause a large economic toll on a region, from severe infrastructural damage, after an earthquake occurs. The ability to predict, and design for, these settlements is crucial to prevent extensive damage. However, the inherent uncertainty involved in predicting seismic events and hazards makes calculating accurate settlement estimations difficult. Currently there are several seismic hazard analysis methods, however, the performance-based earthquake engineering (PBEE) method is becoming the most promising. The PBEE framework was presented by the Pacific Earthquake Engineering Research (PEER) Center. The PEER PBEE framework is a more comprehensive seismic analysis than any past seismic hazard analysis methods because it thoroughly incorporates probability theory into all aspects of post-liquefaction settlement estimation. One settlement estimation method, used with two liquefaction triggering methods, is incorporated into the PEER framework to create a new PBEE (i.e., fully-probabilistic) post-liquefaction estimation procedure for the cone penetration test (CPT). A seismic hazard analysis tool, called CPTLiquefY, was created for this study to perform the probabilistic calculations mentioned above. Liquefaction-induced settlement predictions are computed for current design methods and the created fully-probabilistic procedure for 20 CPT files at 10 cities of varying levels of seismicity. A comparison of these results indicate that conventional design methods are adequate for areas of low seismicity and low seismic events, but may significantly under-predict seismic hazard for areas and earthquake events of mid to high seismicity.
|
5 |
Estimation Of Grain Characteristics Of Soils By Using Cone Penetration Test (cpt) DataOzan, Cem 01 January 2003 (has links) (PDF)
Due to lack of soil sampling during a conventional cone penetration testing (CPT), it is necessary to classify soils based on recorded tip and sleeve friction and pore pressure (if available) values. However, currently available soil classification models are based on deterministic and judgemental determination of soil classification boundaries which do not address the uncertainties intristic to the problem. Moreover, size and quality of databases used in the development of these soil classification models are undocumented and thus questionable. Similar limitations do also exist in the development of SPT-CPT correlations which are widely used in SPT dominated design such as soil liquefaction triggering. To eliminate these discussed limitations, within the confines of this study it is attempted to present (1) a new probabilistic CPT- based soil classification methodology, and (2) new SPT-CPT correlations which address the uncertainties intrinsic to the problems. For these purposes, a database composed of 400 CPT/SPT boring data pairs was compiled. It is intended to develop probabilistic models, which will correlate CPT tip and sleeve friction values to actual soil classification and CPT tip resistance to SPT blow count N. The new set of correlations, model parameters of which estimated by implementing maximum likelihood methodology, presented herein are judged to represent a robust and defensible basis for (1) prediction of soil type based on CPT data and, (2) estimation of SPT-N value for given CPT data.
|
6 |
Measurement and Modeling of Anisotropic Spatial Variability of Soils for Probabilistic Stability Analysis of Earth SlopesVan Helden, Michael John 25 April 2013 (has links)
Geotechnical engineering design has relied upon deterministic methods of analysis whereby values for analysis parameters and conditions are selected subjectively based on judgment with the intent of providing acceptable margins of safety. The objective of this research was to improve the use of probabilistic slope stability analysis in practice so that the design of slopes can be made on a consistent and probabilistic basis.
The current research involved the development of a methodology for the measurement and modeling of the anisotropic autocorrelation distance of cohesive soils, which was demonstrated at Dyke 17 West of the McArthur Falls Generating Station.
In-situ testing using the piezocone and laboratory testing was conducted to characterize the spatial variability of the effective-shear strength envelope. Vertical (down-hole) and horizontal (cross-hole) geostatistical analysis was conducted to assess the anisotropy of the semivariogram. The investigation identified that heterogeneous inclusions had significant impacts on the results, but that simplistic (visual) identification and filtering procedures were adequate.
The effective-stress shear strength envelope was statistically characterized as a random field, which was simulated as a first-order Markov process using customized add-in functions in a limit-equilibrium slope stability analysis. The analysis accounts for the spatial variability of shear strength and is capable of simulating both isotropic and anisotropic autocorrelation functions.
The study showed that the critical slip surface geometry and the probability of failure can be significantly different when the anisotropy of spatial correlation is accounted for. The study also showed that neglecting spatial correlation may over-estimate the probability of failure, however this finding was noted to be likely case-specific. The primary conclusion of the study was that appropriate representation of spatial correlation is essential to calculating the probability of failure.
Finally, convergence of the probabilistic simulation was evaluated using bootstrapping of the simulated factor of safety distribution to assess the standard error in the mean factor of safety, standard deviation of factor of safety and the probability of failure. A convergence criterion based on the percentage standard error in the probability of failure was proposed and used to define the number of Monte-Carlo iterations required.
|
7 |
Field Based Study of Gravel LiquefactionRoy, Jashod 04 August 2022 (has links) (PDF)
Characterization and assessment of liquefaction potential of gravelly soil in a reliable cost-effective manner has always been a great challenge for the geotechnical engineers. The typical laboratory investigation techniques have proven to be ineffective for characterizing gravelly soil due to the cost and difficulty of extracting undisturbed sample from gravelly deposits. The traditional in-situ tests like SPT or CPT are not very suitable for gravelly soil because of interference with large size gravel particles which can artificially increase the penetration resistance. The Becker Penetration Test, well known for gravelly soil characterization, is cost-prohibitive for routine projects and is not available in most of the world. The Chinese dynamic cone penetration test (DPT) with a larger diameter probe compared to the SPT or CPT, can be economically performed with conventional drilling equipment. Besides the penetration testing, in-situ measurement of shear wave velocity (Vs) is another alternative of characterizing gravel liquefaction. Probabilistic liquefaction triggering curves were developed by performing both DPT and shear wave velocity test at the Chengdu Plain of China where massive gravel liquefaction took place during 2008 Wenchuan earthquake. These curves have significant uncertainty as they were developed from a single event database. As a part of this study, both DPT and Vs tests have been performed at various sites around the world where gravelly soil did or did not liquefy in various past earthquakes. These newly collected data have been added to the existing Chinese dataset to form a large database on gravel liquefaction case histories for both DPT and Vs. Based on this larger database, new magnitude dependent probabilistic liquefaction triggering procedures have been developed for both DPT and Vs. The larger database has significantly improved the triggering curves by reducing the spread and constraining the curves at both the higher and lower end. New Magnitude Scaling Factor (MSF) curves have been developed for both DPT and Vs which were found to be consistent with existing MSF curves. Further, an instructive comparison has been drawn between the performance of CPT and newly developed DPT triggering procedure the liquefaction potential of gravelly deposits CentrePort in Wellington. Results showed that both DPT and CPT performed reasonably well in liquefaction assessment of the gravelly fill. However, the CPT-based CRR profiles contain intermittent spikes due to the interaction with gravel particles whereas the DPT resistance appear to be relatively smooth. Similar comparison has been presented between the DPT and BPT in performing liquefaction assessment of gravelly soil at the Borah Peak sites in Idaho. It is found that both DPT and BPT successfully evaluate the liquefaction potential of the loose critical layers but the medium dense to dense layers are identified as non-liquefiable by the DPT whereas the same deposits are identified as liquefiable by the BPT. Lastly, an investigation has been carried out to observe the effect of hydraulic conductivity and in-situ drainage on the liquefaction triggering in gravelly soils based on field data along with a group of numerical analyses. It is found that the hydraulic conductivity of gravelly soil reduces with sand content which eventually may cause liquefaction during earthquake shaking. Low permeability cap layer may also impede the drainage path to generate excess pore pressure to trigger liquefaction in the gravelly strata.
|
8 |
Development of a Simplified Performance-Based Procedure for Assessment of Liquefaction Triggering for the Cone Penetration TestBlonquist, Jenny Lee 06 April 2020 (has links)
Soil liquefaction can cause devastating damage and loss and is a serious concern in civil engineering practice. One method for evaluating liquefaction triggering potential is a risk-targeted probabilistic approach that has been shown to provide more consistent and accurate estimates of liquefaction risk than traditional methods. This approach is a “performance-based” procedure which is based off of the performance-based earthquake engineering (PBEE) framework developed by the Pacific Earthquake Engineering Research (PEER) Center. Unfortunately, due to its complexity, performance-based liquefaction assessment is not often used in engineering practice. However, previous researchers have developed a simplified performance-based procedure which incorporates the accuracy and benefits of a full performance-based procedure while maintaining a more simplistic and user-friendly approach. Until now, these simplified performance-based procedures have only been available for the SPT (Standard Penetration Test). With the increasing popularity of the CPT (Cone Penetration Test), a simplified procedure is needed for CPT-based liquefaction assessment. This thesis presents the derivation of a simplified performance-based procedure for evaluating liquefaction triggering using the Ku et al. (2012) and Boulanger and Idriss (2014) models. The validation study compares the results of the simplified and full performance-based procedures. The comparison study compares the accuracy of the simplified performance-based and traditional pseudo-probabilistic procedures. These studies show that the simplified performance-based procedure provides a better and more consistent approximation of the full performance-based procedure than traditional methods. This thesis also details the development of the liquefaction loading maps which are an integral part of the simplified method.
|
9 |
Jämförelse av odränerad skjuvhållfasthet mellan CPT-sondering och fallkonförsök på UppsalaleraSvensson, Axel January 2017 (has links)
The knowledge about the shear strength of a soil is important because it is a key parameter that is used in many calculations in construction engineering. Some examples of what’s possible to calculate are slope stability, the soil pressure against retaining walls and the carrying capacity of building foundations. Great economic losses or, in the worst case scenario the risk for human lives, could be the result if the geotechnical properties of the soil are ignored. This report considers the undrained shear strength of clay from Uppsala. There are different methods based on empirical experiences which are used to determine the undrained shear strength of a clay. In this project the methods and the results in undrained shear strength are compared between CPT-probing, which is carried out in-situ, and the drop cone test which is done in a laboratory. The reason for this comparison is that they usually don’t show the same results.The tests had already been made before this project started and therefore it is only the comparison of the results between the methods that has been done. The comparison was done by creating charts in Excel where the results from CPT and the drop cone test from was put together from the same point. The shear strength values from the methods were also statistically analysed with a t-test to see if they show the same hypothetical expected value with 95 % significance in every test point / Kunskap om skjuvhållfastheten är viktig då den används för beräkningar inom byggoch anläggningsbranschen. Exempel på vad som kan beräknas är släntstabilitet, jordtrycket mot en spont eller bärförmågan hos en byggnadsgrund. Stora ekonomiska förluster och i värsta fall fara för människoliv kan bli resultatet om jordens geotekniska egenskaper ignoreras. Denna rapport tar upp den odränerade skjuvhållfastheten i Uppsalalera. Det finns olika metoder som bygger på empiriska erfarenheter som kan användas för att ta reda på den odränerade skjuvhållfastheten i lera. I föreliggandeprojekt jämförs metoderna och resultaten i odränerad skjuvhållfasthet mellan CPT-sondering som utförs in-situ och fallkonförsök som utförs på lerprover i ett laboratorium. Anledningen till studien är att metoderna inte alltid ger samma mätvärden. Undersökningarna utfördes innan projektet började. Jämförelsen har gjorts genom den statistiska jämförelsen t (student)-test. Resultatet från t-testet visar att skjuvhållfasthetsvärdena från CPT respektive fallkonförsöken från samma undersökningspunkt och från samma nivå har samma hypotetiska förväntade värde på 95 % signifikansnivå. Genom sammanställda grafer syns att metoderna i de flesta fall överensstämmer till ett djup på minst 20 m.
|
10 |
Performance-Based Liquefaction Triggering Analyses with Two Liquefaction Models Using the Cone Penetration TestArndt, Alex Michael 01 August 2017 (has links)
This study examines the use of performance-based engineering in earthquake liquefaction hazard analysis with Cone Penetration Test data (CPT). This work builds upon previous research involving performance-based liquefaction analysis with the Standard Penetration Test (SPT). Two new performance-based liquefaction triggering models are presented herein. The two models used in this liquefaction analysis are modified from the case-history based probabilistic models proposed by Ku et al. (2012) and Boulanger and Idriss (2014). Using these models, a comparison is made between the performance-based method and the conventional pseudo-probabilistic method. This comparison uses the 2014 USGS probabilistic seismic hazard models for both methods. The comparison reveals that, although in most cases both methods predict similar liquefaction hazard using a factor of safety against liquefaction, by comparing the probability of liquefaction, the performance-based method on average will predict a smaller liquefaction hazard.
|
Page generated in 0.1337 seconds