xx, 361 p. A print copy of this thesis is available through the UO Libraries. Search the library catalog for the location and call number. / Highly conjugated carbon-rich molecules have attracted interest in recent years due to unique electronic, optical and materials properties. Carbon networks based upon the phenylacetylene subunit are increasingly recognized as building blocks for a host of sensing and electronics components due to the rigidity and linearity of carbon-carbon triple bonds. Further extending this motif into a macrocycle, generating a dehydrobenzoannulene (DBA), also confers planarity, increasing the à -conjugation and giving rise to enhanced materials behavior. Functionalization of arylacetylenes and DBAs with electron donating and accepting groups manipulates the energetics such that finely-tuned optoetectronic properties can be devised for customized applications, including fluorescent sensor arrays, organic light-emitting diodes, and nonlinear optical materials. Fundamental structure-property relationship studies into certain physical modifications of molecular architecture effects on the photophysics, intramolecular charge transfer (ICT), or complexation properties are of importance in the rational design of the next generation of organic electronics. Chapter I provides a review of recent advances in the field of annulene chemistry. It is organized by cycle type, size, and application within each category. Chapter II describes syntheses and ion responses of an array of donor/acceptor-functionalized arylacetylenes. The independent manipulation of frontier molecular orbital (FMO) energy levels is discussed in relation to a fluorescent switching phenomenon. Chapter III expands this effect to include [15]DBAs. The consequences of incorporating protonatable donor/acceptor groups into a macrocycle, as well as placement of the acceptor nitrogen are examined, and comparison of calculations to experimental results imply generation of transient ICT species with induced FMO localizations. Chapter IV describes the syntheses of acyclic tetrakis(phenylethynyl)benzene (TPEB) and [14]- and [15]DBA systems utilizing fluorinated acceptor groups. Comparisons between these inductive acceptors and earlier resonance acceptors are made, and imply greater stability and processing potential for optoelectronic applications. Chapter V describes a series of bis[18]DBAs functionalized with dibutylamino groups as donors and nitro groups as acceptors. The effects of 2-donor/2-acceptor versus 4-donor/4-acceptor motifs are explored, and trends are identified in the systematic adjustment of the optical band gap that will have important implications for the design of two-photon absorbing materials. This dissertation includes my previously published and co-authored material. / Adviser: Michael M. Haley

Philosophiae Doctor - PhD / The continuous increase in energy consumption and decrease in fossil fuels reserves are a primary concern worldwide; especially for South Africa. Therefore, there is an urgent need for alternative energy resources that will be sustainable, and environmentally friendly in order to tackle the ecological degradation generated by the use of fossil fuels. Among many energy ‘niches’, solar energy appears to be one of the most promising and reliable for the African continent because of the constant availability of sun light. Organic conjugated polymers have been identified as suitable materials to ensure proper design and fabrication of flexible, easy to process and cost-effective solar cells. Their tendency to exhibit good semiconducting properties and their capability to absorb photons from the sunlight and convert it into electrical energy are important features that justify their use in organic photovoltaic cells. Many different polymers have been investigated as either electron donating or electron accepting materials. Among them, poly(3-hexylthiophene) is one of the best electron donor materials that have been used in organic photovoltaic cells. It is a good light absorber and its Highest Occupied Molecular Orbital (HOMO) energy level is suitable to allow electron transfer into an appropriate electron acceptor. On the other hand, the molecular ordering found in dendrimers attracted some interest in the field of photovoltaics as this feature can ensure a constant flow of charges. In this work, I hereby report for the first time, the chemical synthesis of a highly crystalline dendritic star copolymer generation 1 poly(propylene thiophenoimine)-co-poly(3-hexylthiophene) (G1PPT-co-P3HT) with high molecular weight and investigate its application as donating material in bulk heterojunction organic photovoltaics.

Polímeros conjugados semicondutores tem atraído grande interesse nas últimas décadas devido às possíveis aplicações como componentes ativos em aplicações optoeletrônicas. A adequação destes semicondutores orgânicos para a fabricação de dispositivos depende do entendimento e controle de propriedades eletrônicas básicas: gap fundamental (Eg) e potencial de ionização (IP). Nesse contexto, estudos teóricos baseados em cálculos de primeiros princípios tem se mostrado muito úteis, uma vez que possibilitam a simulação de processos físicos em condições ideais, onde se pode analisar as propriedades eletrônicas de polímeros desconsiderando efeitos do ambiente ou desordem estrutural. A Teoria do Funcional da Densidade (DFT) tem se tornado o método mais comum para o cálculo da estrutura eletrônica do estado fundamental de uma ampla variedade de materiais orgânicos complexos. Embora cálculos DFT baseados na diferença de energias totais tem sido aplicados com sucesso para estimar IPs de moléculas pequenas, este método falha nas propriedades de sistemas conjugados longos. Realmente, a capacidade preditiva da DFT padrão com respeito as propriedades espectroscópicas é frequentemente limitada, entretanto o tratamento adequado das excitações eletrônicas através de abordagens de muitos corpos é ainda muito difícil para materiais orgânicos complexos. Funcionais híbridos que misturam uma fração () de troca exata (EX) não-local ao correspondente semi-local representam uma boa alternativa, embora a quantidade ideal de EX seja, em geral, dependente do sistema. Neste trabalho, adotamos um esquema não-empírico baseado na aproximação G0W0 para identificar o valor ótimo de para o funcional híbrido PBE no qual a correção de autoenergia para o orbital mais alto ocupado (HOMO) de Kohn-Sham generalisado é minimizado. Estudamos, com base nessa estratégia, a dependência com o comprimento das propriedades eletrônicas básicas em uma família de oligômeros conjugados 1D de trans-poliacetileno (TPA). Nossos cálculos mostram que a fração EX ótima (dependente do tamanho) incorporada ao PBEh reproduz com precisão os IPs experimentais determinados em fase gasosa, / Semiconducting conjugated polymers have attracted considerable interest over the past decades due to the promising applications as active components for optoelectronic applications. The suitability of such organic semiconductors for device fabrication relies on quantitative understanding and control of basic electronic properties: fundamental gap (Eg) and ionization potential (IP). In this context, theoretical studies based on first principles approaches have proven useful, through simulating physical processes in ideal conditions, in which one might analyse the electronic properties of polymers apart from the effects of the surrounding environment or structural disorder. Density Functional Theory (DFT) has become an usual choice for calculating the ground state electronic structure of a wide variety of complex organic materials. Although DFT calculations based on total energy differences have been successfully applied to estimate IPs of small molecules, they fail for properties of long conjugated systems. Indeed, the predictive ability of standard DFT with respect to spectroscopic properties is often limited, however a proper treatment of the electronic excitations through many-body approaches is still very difficult for complex organic materials. Hybrid functionals that mix a fraction (_) of nonlocal exact exchange (EX) with the semilocal counterpart represent a good alternative, although the ideal amount of EX is usually system dependent. In this work, we adopt a non-empirical scheme based on the G0W0 approximation to identify the optimum _ value for the PBE hybrid functional for which the self-energy correction to the generalized Kohn-Sham highest occupied molecular orbital (HOMO) is minimized. Based on this strategy we study the size dependence of the basic electronic properties in a family of 1D _-conjugated oligomers of trans-polyacetylene (TPA). Our calculations demonstrate that the size dependent optimal EX fraction incorporated in PBEh accurately reproduces IPs from experimental gas phase data, although no particular constraint has been imposed a priori. Furthermore, we note that the optimum _-value decreases exponen tially with chain length going from _ w0.85 for the smaller oligomer (ethylene, n=1) up to _ w0.75 extrapolated for an isolated TPA chain. The accuracy of our optimized PBEh in predicting IPs and Eg is superior to other conventional mean field approaches, as demonstrated for a selected set of conjugated molecules such as acenes and phenylenes. As a result, we can obtain good estimations for the energy barriers of electron transfer in organic/organic interfaces. On the other extreme, we analyse the influence of exact exchange on the electronic structure of the prototypical metal system gold (Au), commonly used as electrode in organic devices. In this case, we confirm the expected result that the insertion of even a small fraction of EX into PBE functional distorts the Au band structure, worsening the description of electronic properties compared to regular PBE. We then proceed to analyse the factibility of studying polymer/metal interface systems using pure DFT. Our calculations reveal that the result is too system-dependent: for the TPA/Au(111) interface, an artificial charge transfer takes place at interface due to an underestimation of the IPs of the conjugated system inherent to the underlying DFT approximation. Finally, our study emphasizes the importance of a physically motivated choice of EX fraction in hybrid functionals for accurately predicting both ionization potentials and fundamental gaps of organic semiconductors relevant for nanoelectronics.

Ho Ming Kei = 新的有機發光器件的界面研究 / 何銘基. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2005. / Includes bibliographical references. / Text in English; abstracts in English and Chinese. / Ho Ming Kei = Xin de you ji fa guang qi jian de jie mian yan jiu / He Mingji. / Abstract --- p.i / 论文摘要 --- p.iii / Acknowledgements --- p.iv / Table of Contents --- p.v / List of Figures --- p.viii / List of Tables --- p.xiii / Chapter Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Overview --- p.1 / Chapter 1.2 --- Conjugated Polymers --- p.2 / Chapter 1.2.1 --- Electronic and geometric Configuration --- p.2 / Chapter 1.2.2 --- Charge Carries of conjugated polymers --- p.4 / Chapter 1.2.3 --- Polymer Light Emitting Diodes --- p.11 / Chapter 1.2.4 --- Device Fabrication --- p.12 / Chapter 1.2.5 --- Polymeric Luminescent Material Development --- p.18 / Chapter 1.2.6 --- Interface and Surface of PLED --- p.21 / Chapter 1.3 --- Aims of this thesis --- p.22 / References --- p.24 / Chapter Chapter 2 --- Instrumentation --- p.26 / Chapter 2.1 --- X-ray Photoelectron Spectroscopy --- p.26 / Chapter 2.1.1 --- Introduction --- p.26 / Chapter 2.1.2 --- Basic Principles and Theory --- p.28 / Chapter 2.1.3 --- Qualitative Analysis Using XPS --- p.29 / Chapter 2.1.4 --- Angular Effect on XPS --- p.29 / Chapter 2.1.5 --- Chemical Shifts --- p.30 / Chapter 2.1.6 --- Quantitative Analysis using XPS --- p.31 / Chapter 2.1.6.1 --- Survey spectrum --- p.32 / Chapter 2.1.6.2 --- Core level spectrum --- p.32 / Chapter 2.1.6.3 --- Valence band spectrum --- p.33 / Chapter 2.1.7 --- Instrumental Setup for XPS --- p.33 / Chapter 2.2 --- HV physical vapor deposition system with nitrogen glove box --- p.36 / Chapter 2.2.1 --- Nitrogen grove box --- p.38 / Chapter 2.2.2 --- HV physical vapor deposition system --- p.38 / Chapter 2.3 --- L-V-I measurement system --- p.41 / Chapter 2.3.1 --- Keithley 236 source-measure unit --- p.41 / Chapter 2.3.2 --- Photo Research PR-650 photo meter --- p.43 / Chapter 2.3.3 --- Test Environment Chamber --- p.43 / Chapter 2.4 --- a-Step Profilometer --- p.44 / References --- p.45 / Chapter Chapter 3 --- Interface study between MEHPPV: PEG and Aluminum --- p.46 / Chapter 3.1 --- Introduction --- p.46 / Chapter 3.2 --- Sample Preparations --- p.47 / Chapter 3.2.1 --- Si(lll) substrate preparation --- p.47 / Chapter 3.2.2 --- Au sputtering on the clean Si Surface --- p.48 / Chapter 3.2.3 --- Polymer film formation --- p.48 / Chapter 3.3 --- Results and Discussion --- p.49 / Chapter 3.3.1 --- XPS Survey scan ofMEHPPV --- p.51 / Chapter 3.3.2 --- XPS of Cls Core level ofMEHPPV --- p.51 / Chapter 3.3.3 --- XPS ofOls Core level ofMEHPPV --- p.55 / Chapter 3.3.4 --- XPS of A12p Core level ofMEHPPV --- p.59 / Chapter 3.3.5 --- XPS Survey scan of PEG --- p.64 / Chapter 3.3.6 --- XPS of Cls Core level of PEG --- p.64 / Chapter 3.3.7 --- XPS of Ols Core level of PEG --- p.67 / Chapter 3.3.8 --- XPS of A12p Core level of PEG --- p.70 / Chapter 3.3.9 --- XPS survey scan of MEHPPV:PEG(10wt% PEG) --- p.73 / Chapter 3.3.10 --- XPS Cls core level of MEHPPV:PEG(10wt% PEG) --- p.73 / Chapter 3.3.11 --- XPS Ols core level of MEHPPV:PEG(10wt% PEG) --- p.76 / Chapter 3.3.12 --- XPS A1 2p core level of MEHPPV: PEG --- p.80 / Chapter 3.3.13 --- Surface migration of bulk absorbed oxygen --- p.84 / Chapter 3.4 --- Conclusions --- p.84 / Reference --- p.87 / Chapter Chapter 4 --- Efficiency enhancement in polymer light emitting diodes using Crown ether 18-C6 and aluminum cathode --- p.89 / Chapter 4.1 --- Introduction --- p.89 / Chapter 4.2 --- Sample preparation --- p.91 / Chapter 4.2.1 --- The Cleaning of substrate --- p.91 / Chapter 4.2.2 --- PEDOT: PSS film formation --- p.93 / Chapter 4.2.3 --- Emissive polymer layer formation --- p.94 / Chapter 4.2.4 --- Deposition of metal cathode --- p.94 / Chapter 4.2.5 --- Epoxy Encapsulation --- p.95 / Chapter 4.3 --- Results and Discussion --- p.95 / References --- p.101 / Chapter Chapter 5 --- Concluding Remarks and Future Work --- p.102 / Chapter 5.1 --- Concluding Remarks --- p.102 / Chapter 5.2 --- Future Work --- p.103

Drug-resistant pathogens are emerging rapidly and thwart the treatment of common bacterial infectious diseases that can lead to death. Many contagious diseases remain difficult to treat because of acquired drug resistance. Compared to small antibiotics, which interrupt the intracellular biochemical processes, antimicrobial polymers with relatively high molecular weights offer a promising strategy to overcome drug resistance by disrupting the physical integrity of the membrane. Because of the unique mechanism, bacteria need a much longer time to develop resistance. A new class of antimicrobial polymer in which the positive charge and hydrophobic/hydrophilic units are linearly connected in the amidinourea backbone was designed, synthesized, and tested for various bacteria including methicillin-resistant Staphylococcus aureus (MRSA). We evaluated the effects of hydrophobicity and polymer molecular weights on antimicrobial activity by measuring minimum inhibitory concentrations (MIC) and hemolytic activities (HC50). Amidinourea antimicrobial polymers exhibit a promising MIC90 value (13 μg/mL) with low HC50, resulting in high selectivity (HC50/MIC90) against MRSA. Many bacteria have developed resistance against Ciprofloxacin. To overcome the antibiotic resistance associated with Ciprofloxacin, we hypothesized that a steady release of Ciprofloxacin at the bacteria membrane can overcome the drug resistance because the local drug concentration can be overwhelmingly high to suppress the drug efflux pump expressed on the membrane. A series of homo and di-block copolymers containing Ciprofloxacin, as the form of prodrugs, was synthesized using ring-opening metathesis polymerization (ROMP), and we evaluated their antimicrobial efficacy.While homo polymers only containing Ciprofloxacin were inactive against almost all bacteria tested, di-block copolymers containing Cipro and triphenylphosphine exhibited some antimicrobial activity against wild type M. smegmatis. Modulation of chemical environments at the positively charged polymeric materials can significantly influence the biophysical properties required for efficient cellular interaction and subsequent entry. Using intrinsic fluorescent conjugated polymers (CPs), we have demonstrated that the modulated guanidine group with various hydrophilic or hydrophobic moieties dramatically changed their cellular behaviors. We prepared a series of modified guanidine-containing CPs and examined their cellular behaviors by using confocal microscopic imaging. Details of the modification chemistry and modification-dependent cellular behaviors and a knockdown of a target protein in primary cells were discussed.

<p>Since the discovery in 1977 that conjugated polymers can be doped to achieve almost metallic electronic conduction, the research field of conducting polymers has escalated, with applications such as light emitting diodes, solar cells, thin film transistors, electrochemical transistors, logic circuits and sensors. The materials can be chemically modified during their synthesis in order to tailor the desired mechanical, electronic and optical properties of the final product. Polymers are also generally possible to process from solution, and regular roll-to-roll printing techniques can therefore be used for manufacturing of electronic components on flexible substrates like plastic or paper. On top of that, the nature of conjugated polymers enables the creation of devices with novel properties, which are not possible to achieve by using inorganic materials such as silicon.</p><p>The work presented in this thesis mainly focuses on devices that utilize two rather unique properties of conducting polymers. Conducting polymers are generally electrochromic, i.e. they change color upon electrochemical oxidation or reduction, and can therefore be used as both conductor and pixel element in simple organic displays. As a result of the electrochemical reaction, some polymers also alter their surface properties and have proven to be suitable materials for organic electronic wettability switches. Control of surface wettability has applications in such diverse areas as printing techniques, micro-fluidics and biomaterials.</p><p>The aim of the thesis is to briefly describe the physical and chemical background of the materials used in organic electronic devices. Topics include molecular properties and doping of conjugated polymers, electrochromism, surface tension etc. This slightly theoretical part is followed by a more detailed explanation of device design, functionality and characterization. Finally, a glance into future projects will also be presented.</p> / ISRN/Report code: LiU-TEK-LIC-2005:50

<p>Major efforts have been spent during recent years in worldwide attempts to achieve an electronic paper technology; the common name for novel flexible displays utilizing substrates such as paper, plastics or thin metal sheets. Various kinds of technology are available that potentially will be used for an electronic paper, which differs from each other mainly with respect to the choice of active materials, substrates and manufacturing techniques. There are many applications for electronic paper technology, ranging from high-resolution displays used in electronic books to updateable large-area billboards. The latter suggests a novel electronic display function that could extend the utilization of cellulose-based paper, which is one of the most common materials ever produced by mankind, by using the paper as a thin and flexible carrier. The requirement for fast update speed in such large area applications would probably be a bit more relaxed compared to traditional display technologies, while low-power consumption and bi-stability are among the factors that should be further emphasized, together with the utilization of well-established printing techniques to enable low-cost manufacturing of the displays. The choice of active materials is therefore crucial in order to reach these objectives in reality and this paves the way for printable conjugated polymers with electrochromic properties. Chemical synthesis of these materials during the last decades has resulted in a vast variety of electrochromic polymers with custom-tailored functionality covering a broad range of optical absorption and electrical conductivities.</p><p>This thesis review the studies done on the electrochemical switching of poly(3,4-ethylenedioxythiophene) (PEDOT). For this material both the electrical conductivity and the optical absorption is controlled by the oxidation state. Active matrix addressed displays that are printed on flexible substrates have been obtained by arranging electrochemical smart pixels, based on the combination of electrochemical transistors and electrochromic display cells, into cross-point matrices. The resulting polymer-based active-matrix displays are operated at low voltages and the same active material can be used in electrochemical transistors and conducting lines and in electrochromic display cells employing the electronic and the opto-electonic properties of the material, respectively. In addition to this, a switchable optical polarizer is briefly discussed. This is a device utilizing electrochromism of stretch-aligned polyaniline (PANI). The combination of two identical devices in a vertical architecture, orthogonally oriented with respect to each other, results in a filter in which the orientation of the polarized optical absorption is governed by the voltage polarity applied to the device.</p> / Report code: LiU-TEK-LIC- 2006:18

<p>The discovery of semi-conducting and conducting organic materials has opened new possibilities for electronic devices and systems. Applications, previously unattainable for conventional electronics, have become possible thanks to the development of conjugated polymers. Conjugated polymers that are both ion- and electron conducting, allow for electrochemical doping and de-doping via reversible processes as long as both forms of conduction remain available. Doping causes rearrangement of the -system along the polymer backbone, and creates new states in the optical band gap, resulting in an increased electronic conductivity and also control of the color (electrochromism). Doping can also occur by charge injection at a metal – semiconducting polymer interface. Electrochemical electronic devices and solid state devices based on these two types of doping are now beginning to enter the market.</p><p>This thesis deals with organic based-devices whose working mechanism involves electrolytes. After describing the properties of conjugated polymers, fundamentals on electrolytes (ionic conductivity, types, electric double layer and the electric field distribution) are briefly presented. Thereafter, a short review of the field of organic field effect transistors as well as a description of transistors that are gated via an electrolyte will be reviewed.</p><p>Paper I present a novel technique to visualize the electric field within a two-dimensional electrolyte by applying the electrolyte over an array of electronically isolated islands of electrochromic polymer material on a plastic foil. By observing the color change within each polymer island the direction and the magnitude of the electric field can be measured. This technology has applications in electrolyte evaluation and is also applicable in bio-analytical measurements, including electrophoresis. The focus of paper II lies on gating an organic field effect transistor (OFET) by a polyanionic proton conductor. The large capacitance of the electric double layer (EDL) that is formed at organic semiconductor/polyelectrolyte upon applying a potential to the gate, results in low operation voltages and fast response. This type of transistor that is gated via electric double layer capacitor is called EDLC-OFET. Because an electrolyte is used as a gate insulator, the role of the ionic conductivity of the electrolyte is considered in paper III. The effect on the electronic performance of the transistor is studied as well by varying the humidity level.</p>

The effects of conjugated linoleic acid (CLA) on lipogenesis and preadipocyte proliferation in young pigs were evaluated in two separate experiments. The first compared dietary effects of linoleic acid, beef tallow, and CLA on composition, lipogenesis, and DNA synthesis. Eighteen pigs weaned at 17 d of age were allotted randomly to corn-based diets supplemented with 1.5% corn oil, 1.5% tallow, or 1.5% CLA. The second experiment evaluated the effects of CLA included with diets high in polyunsaturated fat or beef tallow. Twenty-four pigs weaned at 17 d of age were allotted randomly to one of four corn-based diets supplemented with: 15% corn oil, 12% corn oil + 3% CLA, 15% tallow, and 12% tallow + 3% CLA. The piglets in both trials were fed a basal diet for 7 d and their respective diet for 35 d. [U-14C]Glucose incorporation into total lipids was (experiment 1): 10.64, 11.04, 13.64; (experiment 2): 21.15, 17.54, 21.34, and 19.52 nmol/(105 cells per h) for subcutaneous (s.c.) adipose tissue from corn oil, tallow, CLA; corn oil, corn oil + CLA, tallow, and tallow + CLA-fed piglets, respectively. Tritiated thymidine incorporation into DNA was not different in s.c. adipocytes across treatment groups, but was 5,581, 2,794, 6,573, and 3,760 dpm/(105 cells per h) in s.c. stromal vascular cells from corn oil, corn oil + CLA, tallow, and tallow + CLA-fed piglets, respectively (CLA main effect p<0.034). Additionally, there was a greater proportion of s.c. adipocytes in the smaller, 180-pL cell fraction from the corn oil + CLA-fed pigs (p<0.0074). CLA in the diet increased the s.c. adipose tissue concentration of 18:0 and decreased 16:1 and 18:1 (p<0.05), suggesting depression of stearoyl-coenzyme A desaturase (SCD) enzyme activity in the CLA-fed pigs. The concentration of CLA isomers was raised only slightly in s.c. adipose tissue with the addition of CLA to the diets even though the CLA oil contained 62% CLA isomers. No effects on the growth of young pigs were observed. However, CLA caused a more saturated fatty acid composition and may suppress preadipocyte proliferation, apparent SCD activity, and lipid filling of smaller cells.

In Leuchtdioden wird Licht durch die Rekombination von injizierten Ladungsträgern erzeugt. Das kann einerseits in anorganischen Materialien geschehen. In diesem Fall ist es notwendig, hochgeordnete Kristallstrukturen herzustellen, die die Eigenschaften der Leuchtdioden bestimmen. Ein anderer Ansatz ist die Verwendung von organischen Molekülen und Polymeren. Auf Grund der Vielseitigkeit der organischen Chemie können die Eigenschaften der verwendeten halbleitenden Polymere schon während der Synthese beeinflusst werden. Außerdem weisen auch diese Polymere die bekannte mechanische Flexibilität auf. Die Herstellung von flexiblen, großflächigen Beleuchtungsquellen und Anzeigelementen ist so möglich.<br> Die erste Leuchtdiode mit einem halbleitenden Polymer als Emitter wurde 1990 hergestellt. Seither hat das Forschungsgebiet eine rasante Entwicklung genommen. Auch erste kommerzielle Produkte sind erhältlich. Im Zuge dieser Entwicklung wurde deutlich, dass die Eigenschaften von polymeren Leuchtdioden – beispielsweise Farbe und Effizienz – durch die Verwendung mehrerer Komponenten in der aktiven Schicht deutlich verbessert werden können. Gleichzeitig ergeben sich neue Herausforderungen durch die Wechselwirkungen der verschiedenen Filmbestandteile. Während die Komponenten oft entweder zur Verbesserung des Ladungstransportes oder zur Beeinflussung der Emission zugegeben werden, muss darauf geachtet werden, dass die anderen Prozesse nicht negativ beeinflusst werden. In dieser Arbeit werden einige dieser Wechselwirkungen untersucht und mit einfachen physikalischen Modellen erklärt.<br> So werden zunächst blau emittierende Leuchtdioden auf der Basis von Polyfluoren untersucht. Dieses Material ist zwar ein sehr effizienter blauer Emitter, jedoch ist es anfällig für chemische Defekte, diese sich nicht vollständig verhindern lassen. Die Defekte bilden Fallenzustände für Elektronen, ihr Einfluss lässt sich durch die Zugabe von Lochfallen unterdrücken. Der zugrunde liegende Prozess, die Beeinflussung der Ladungsträgerbalance, wird erklärt. Im Folgenden werden Mischsystemen mit dendronisierten Emittern, die gleichzeitig eine Falle für Elektronen bilden, untersucht. Hier wird die unterschiedliche Wirkung der isolierenden Hülle auf die Ladungs- und Energieübertragung zwischen Matrix und Farbstoffkern der Dendrimere untersucht. In Mischsystemen haben die Natur der angeregten Zustände sowie die Art und Weise des Ladungsträgertransportes einen großen Einfluss auf diese Transferprozesse. Außerden hat auch hier die Ladungsträgerbalance Auswirkungen auf die Emission. Um den Ladungsträgereinfang in Fallenzuständen zu charakterisieren, wird eine Methode auf Grundlage der Messung des zeitaufgelösten Photostroms in organischen Mischfilmen weiterentwickelt. Die erzielten Ergebnisse zeigen, dass die Übertragung der für geordnete Systeme entwickelten Modelle des Ladungsträgertransportes nicht ohne weiteres auf Polymersysteme mit hoher Unordnung übertragen werden können. Abschließend werden zeitaufgelöste Messungen der Phosphoreszenz in entsprechenden Mischungen aus Polymeren und organometallischen Verbindungen vorgestellt. Auch diese Systeme enthalten üblicherweise weitere Komponenten, die den Ladungstransport verbessern. In diesen Filmen kann es zu einer Übertragung der Tripletts vom Emitter auf die weiteren Filmbestandteile kommen. Bei Kenntnis der in Frage kommenden Wechselwirkungen können die unerwünschten Prozesse vermieden werden. / Light-emitting diodes generate light from the recombination of injected charge carriers. This can be obtained in inorganic materials. Here, it is necessary to produce highly ordered crystalline structures that determine the properties of the device. Another possibility is the utilization of organic molecules and polymers. Based on the versatile organic chemistry, it is possible to tune the properties of the semiconducting polymers already during synthesis. In addition, semiconducting polymers are mechanically flexible. Thus, it is possible to construct flexible, large-area light sources and displays.<br> The first light-emitting diode using a polymer emitter was presented in 1990. Since then, this field of research has grown rapidly up to the point where first products are commercially available. It has become clear that the properties of polymer light-emitting diodes such as color and efficiency can be improved by incorporating multiple components inside the active layer. At the same time, this gives rise to new interactions between these components. While components are often added either to improve the charge transport or to change the emission, it has to made sure that other processes are not influenced in a negative manner. This work investigates some of these interactions and describes them with simple physical models.<br> First, blue light-emitting diodes based on polyfluorene are analyzed. This polymer is an efficient emitter, but it is susceptible to the formation of chemical defects that can not be suppressed completely. These defects form electron traps, but their effect can be compensated by the addition of hole traps. The underlying process, namely the changed charge carrier balance, is explained. In the following, blend systems with dendronized emitters that form electron traps are investigated. The different influence of the insulating shell on the charge and energy transfer between polymer host and the emissive core of the dendrimers is examined. In the blend, the nature of the excited states as well as the method of the charge transport through the layer are of great importance to the transfer. Again, the charge carrier balance influences the emission. To characterize the trapping of charges in trap states, a method based on the measurement of transient photocurrents is enhanced. The results show that models developed for ordered systems can not simply be transferred to polymer systems with a high degree of disorder. Finally, time-resolved measurements of the phosphorescence decay in blends of polymers with organo-metallic compounds are shown. Usually, these systems contain more components that facilitate charge transport. Thus, triplets may be transferred from the phosphorescent dye other components of the film. Knowing the underlying interactions, unwanted processes can be suppressed.