The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.

This diploma thesis presents a project documentation for construction of a community centre with a restaurant. Its construction site is located on the outskirts of town Jaroměřice nad Rokytnou, Poděbradova street. The building is composed from three parts, which are connected to each other. The first part houses the restaurant with its facilities. This part is a single floor structure covered by a flat green roof. Its façade is formed by white boards composed into an asymmetrical pattern. The second part serves as a backstage area where all the necessary facilities are located. This second part of the building is as the first part a single floor structure covered by a flat green roof. Its façade is formed by façade timber boards. The main entrance is located in the middle part, which is the third part the building. It has two floors and it houses an auditorium, a bar and amenities. Its façade is formed by trapezial boards. The construction system is formed by load bearing walls and by prestressed concreted floor panels or in some parts by cast-in-place reinforced concrete slabs. The building has strip foundations. Its interior walls are built from sand-limestone bricks with acoustic properties. The perimeter walls are covered with ventilated façade with mineral wool thermal insulation. The heating of the community centre is powered by gas boiler connected to single-vent chimney with ventilation shaft.

The subject of my diploma thesis is the design of a new medical center MEDCEN in the area of the Jihlava hospital, on plot no. 4374/1. The total land area is 22 706 m2. The building has three aboveground and one underground floor. The vertical bearing structure consists of masonry ceramic elements, which are complemented by a monolithic, water-reinforced concrete in the underground floor. Vertical peripheral structures are equipped with thermal insulation system, in the above-ground floors with ventilated facade. The vertical load-bearing structures are made of prefabricated reinforced concrete panels and reinforced by reinforced concrete beams at the local load. The whole building is designed flat single-skin roof with a classic order of layers, where the main waterproofing layer consists of plasticized PVC foils. The layout of the building is divided into left and right wing, which connects the central central part. The entire underground floor is designed to be operational, there are parking spaces for employees, storage facilities and technical facilities of the building. Individual offices, nurses and waiting rooms are designed on all above-ground floors. In the central central part are designed sanitary rooms for visitors and employees. On the first floor is a pharmacy and X-ray examination room. On the third floor there are two office management offices and one-day surgery premises.

The diploma thesis is a project of an apartment block with a total number of 10 apartments. The building is located in the cadastral areas of Žirovnice 797154 on the numbers of parcels 653/1, 634/1, 634/2. The building is a five-storey building with four floors above the ground and one underground floor. Floors are designed as a brick system with the contact insulation. Underground floor consists of a reinforced concrete wall monolith which is based on the footings. Horizontal structures are made up of prefabricated ceramic system Miako and a reinforced concrete monolithic slab. The roof is flat and single-layer. The floors are connected by monolithic reinforced concrete staircase and an elevator which is located in the shaft.

It is a new Centre of the Integrated Rescue System to p No. 375/2 in the cadastral Sand 720755th The project documentation is conducted only for the fire station. that consists of three dilated from buildings. Building for day stay is three-storey, two-storey garage with workshops and drying storey tower. Brick construction system based on the footings. Horizontal structure prestressed panels are at SPIROLL. The roof is flat, single-layer and desk hunter cased. Concrete floors are connected by a staircase in the building for day stay and welded steel in the drying tower.

The thesis deals with the new building of the Faculty of Fine Arts in Veveří street, Brno. The area discussed is situated on the border between Brno-střed and Brno-Žabovesky. It is delineated by Veveří, Šumavská, and Bulínova streets. The design concerns a complex of two universities, which comes from the new draft of local plan of Brno. This plan copes with a draft of an underground tram track. The design also follows the building programme which has been created for an architectural competition in Akademické square in Brno. Both the Faculty of Fine Arts and the Institute of Forensic Engineering (which is expected to be converted into the Faculty of Forensic Engineering) will be moved to this compound. Furthermore, common conveniences, used by all of the dislocated organization units, will be situated there, including the assembly hall, university canteen, library, exhibition grounds and technical support. Apart from the buildings of VUT, the campus will include a parking lot, requested and financed by the municipal authority of Brno, which will replace current parking spots. The arrangement of the campus proposed will allow a successive construction - during the first phase, all the parking lots must be built and subsequently, the individual faculties. FaVU will be composed of three traditional disciplines - painting, sculpture and intermedia - which will include other subdisciplines. In the design proposed, there are also external sites designed for the art of sculpture.

The main theme of this Master´s thesis is a project of detached residential house of a terraced type, partially located in terrain. The building has three floors and a basement and is covered by a flat roof. There are six residential units in the house and three parking spaces, including technical support. The house will be built in the village of Pribyslavice, on the plots with parcel numbers 140/1 and 145/1. The ground plan of the house is of a rectangular shape. The vertical load-bearing structural system is chosen to be made from bricks. Horizontal system is made by using Spiroll prestressed panels. The internal staircase is made from concrete, monolithic. The material and construction solutions is chosen to be close to passive standards. The project fully respects currently applicable standards and technical regulations of individual manufacturers.

The master‘s thesis concerns about the freestanding multipurpose sport hall with a base for sportsmen and spectators and its associated sport and regeneration centre. The object is situated in a city district Brno Bohunice. The designed building is divided into a single storey multipurpose sport hall and an outbuilding with two above-ground floors and a partial third floor above the entrance part of the building. Object’s plan shape forms a rectangle with recessed entrance part. The load-bearing structure consists of a combined column and wall construction system. The main multipurpose hall is roofed with arched glulam laminated trusses, which are supported by steel columns covered by sandwich panels. The outbuilding’s vertical load-bearing structure is formed by clay blocks. The horizontal load-bearing structure is formed by prestressed concrete floor slab. The building is based on shallow foundations. The object is designed to be barrier-free for sportsmen and visitors as well.

Diploma thesis "Block of flats" is processed in the form of project documentation for the construction, according to valid standards and regulations. Residential house is designed as a four-storey building with warm flat roof. It is a detached house on flat terrain. There is a workshop, storage and technical facilities of the building on the first floor, in the other floors are located 8 dwelling units. The whole building is made of the sand-lime brick blocks and reinforced concrete ceilings. The building is based on reinforced concrete strip foundations. Material and structural solutions were chosen so that the object is approaching to the passive standard. The project also includes specialization of the diploma thesis processing at the Institute of building services

The aim of this thesis is to design a mountain chalet. Chalet is intended for recreation and accommodation for 23 persons and is designed to gently sloping land in the village of Horní Bečva. The building has two floors without a basement. The main entrance to the building is from the southern side entrance for staff is on the eastern side and the other side entrance to the building is from the north. Part of the building for accommodation is situated on the 2nd floor. Perimeter and interior bearing walls are designed from brick blocks Porotherm in 2.NP then the inner walls of plasterboard. The construction of a roof over the main part of the building is made up of wooden roof purlin system, a roof over your wellness zone is flat vegetation, and the roof over the vestibule is flat with classical music. The main part of the building is covered with a gable roof with a slope of 35 degrees inclinations flat roof over the vestibule wellness zone and 3%.