The aim of this work was to design the construction of transport equipment under industrial robot, pallet holder or other equipment. This manipulation device can be moved in one axis on a rigid guide. The device is designed for use in a linear manufacturing system for handling workpieces and tools. It is capable of operating two rows of machines when it is placed in the middle. The main function of this device is to extend the workspace to the carried devices. This type of construction can be used in combination with an industrial robot for other technological tasks such as welding or light machining. The main parts of this device include statically mounted beds that can be stacked behind each other to form optionally long conveyor paths and a positioning plate that moves along the path formed by these beds. An industrial robot, pallet holder or other device is attached to this positioning plate. In addition to the design itself, the thesis also includes a thorough research of the issue, further possibilities of solution in the form of concepts, verification of the structure by means of calculations and simulations and implementation of the solution into a specific production cell.

This thesis is developed as a proposal for heating for a primary school and kindergarten in the region of Brno-countryside. For the insulated building, a combination of heating and air-conditioning is proposed. The concept is designed so that the air-conditioning preheats the exterior air and the heating system warms the incoming air to a comfortable temperature. For the required thermal performance, sources of heat (for gas and pellets) and a layout solution for the boiler room is designed. Drainage of combustion products is proposed for both solutions. The project solution is per the extent of the construction permit. The theoretical part is linked with the practical part through the condensation boilers, their function and division, and drainage of combustion products. The experiment for the given topic was conducted on the drainage of combustion products. The pressure loss of the reverse knob was determined in relation to the flow rate of air in the condensation boilers as this loss is essential in assessing the drainage of combustion products.