The primary objective of this study is to provide a greater understanding of the tectonic evolution of the Warburton, Cooper, Eromanga and Lake Eyre Basins in central Australia. However, this study additionally attempts to provide a greater understanding of lineaments. This study compares lineament data with a traditional tectonic analysis in order to evaluate lineaments and to best understand the tectonic evolution of the region.

The primary objective of this study is to provide a greater understanding of the tectonic evolution of the Warburton, Cooper, Eromanga and Lake Eyre Basins in central Australia. However, this study additionally attempts to provide a greater understanding of lineaments. This study compares lineament data with a traditional tectonic analysis in order to evaluate lineaments and to best understand the tectonic evolution of the region.

This thesis describes the development and production of numerical simulations of the creation of a Hot Dry Rock (HDR) geothermal reservoir. This geothermal reservoir that was simulated is owned by Geodynamics Limited and is located in the Cooper Basin, South Australia. The simulations show the geometry of the geothermal reservoir and predict the productive lifespan of the reservoir. Geothermal energy, which is the thermal energy that is stored in the interior of the earth, is an enormous energy source and as such there is great interest in technology that allows this energy to be harnessed. The HDR process of extracting the geothermal energy from rock involves drilling a borehole to a suitable depth and injecting cold water into the rock via this well (known as the injection well) to create a reservoir by opening up fractures in the rock. As water is forced through the reservoir, heat is extracted from the rock via conduction and transferred to the water, creating an heat exchange. Warm water is brought to the surface via another well known as the extraction well. The heat from the water is used to generate electricity and then the water is fed back into the injection well, completing the cycle. The creation of a HDR geothermal reservoir comprises of many aspects: the injection of the fluid into the jointed rock system, the opening and shearing of the joints, the creation of the fluid reservoir in the rock and the temperature effects of the fluid flow through the joints. This work incorporates all of these aspects. Due to the multi-physics nature of this process multiple computational modelling strategies were implemented to allow for authentic simulation of the entire process. The mechanical rock behaviour was primarily simulated the Distinct Element Method. This two dimensional Distinct Element Method program allowed for a realistically scaled model of the whole geothermal reservoir to be developed. This model was particularly useful for modelling the joint behaviour as the discrete nature of this method compares well with the joint system on such a scale. A discrete particle based model was used to model the joint behaviour on a small scale. These models demonstrated the behaviour of joints under compressional strain, showing slip and the effects of joint dilatancy. The productive lifespan of the geothermal reservoir was modelled using a Finite Element Method program based on Darcy's Law and an height-averaged heat equation. The aim of this model was to simulate the effects on the rock temperature of the fluid flow through the reservoir. The lifespan of the reservoir with differing well geometries was tested using this model to show which geometry would extend the productive lifetime of the geothermal reservoir. The results produced from the DEM models showed that the reservoir geometry is very much dependent upon the joint angle, and under the Cooper Basin stress regime steeper joints will be more likely to open. Joint dilatancy also affects the fluid flow rates as the amount of joint opening is dependent upon the joint dilatancy angle. The modelling of the temperature drawdown of the rock due to the fluid flow showed that a square configuration of wells is the ideal configuration to prolong the productive lifespan of the HDR geothermal reservoir. Results produced with the modelling parameters provided by Geodynamics Limited indicate that the productive lifespan of the Cooper Basin HDR geothermal reservoir created is approximately 50 years. This reservoir is only one of many that can be created at the site to prolong the productivity of the energy plant. The combined results of this modelling strategy give an overall image of the creation and lifetime of the HDR geothermal energy plant in the Cooper Basin.

Bibliography: leaves 299-320. / xv, 320 leaves : ill., maps ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / The aim of this thesis is to determine the amount of exhumation in the Cooper-Eromanga Basins. The compaction method is applied in order to achieve this aim. The study expands the traditional use of the sonic log as the main 'tool' in compaction-based analysis. / Thesis (Ph.D.)--University of Adelaide, Dept. of Geology and Geophysics, 1997?

This thesis describes the development and production of numerical simulations of the creation of a Hot Dry Rock (HDR) geothermal reservoir. This geothermal reservoir that was simulated is owned by Geodynamics Limited and is located in the Cooper Basin, South Australia. The simulations show the geometry of the geothermal reservoir and predict the productive lifespan of the reservoir. Geothermal energy, which is the thermal energy that is stored in the interior of the earth, is an enormous energy source and as such there is great interest in technology that allows this energy to be harnessed. The HDR process of extracting the geothermal energy from rock involves drilling a borehole to a suitable depth and injecting cold water into the rock via this well (known as the injection well) to create a reservoir by opening up fractures in the rock. As water is forced through the reservoir, heat is extracted from the rock via conduction and transferred to the water, creating an heat exchange. Warm water is brought to the surface via another well known as the extraction well. The heat from the water is used to generate electricity and then the water is fed back into the injection well, completing the cycle. The creation of a HDR geothermal reservoir comprises of many aspects: the injection of the fluid into the jointed rock system, the opening and shearing of the joints, the creation of the fluid reservoir in the rock and the temperature effects of the fluid flow through the joints. This work incorporates all of these aspects. Due to the multi-physics nature of this process multiple computational modelling strategies were implemented to allow for authentic simulation of the entire process. The mechanical rock behaviour was primarily simulated the Distinct Element Method. This two dimensional Distinct Element Method program allowed for a realistically scaled model of the whole geothermal reservoir to be developed. This model was particularly useful for modelling the joint behaviour as the discrete nature of this method compares well with the joint system on such a scale. A discrete particle based model was used to model the joint behaviour on a small scale. These models demonstrated the behaviour of joints under compressional strain, showing slip and the effects of joint dilatancy. The productive lifespan of the geothermal reservoir was modelled using a Finite Element Method program based on Darcy's Law and an height-averaged heat equation. The aim of this model was to simulate the effects on the rock temperature of the fluid flow through the reservoir. The lifespan of the reservoir with differing well geometries was tested using this model to show which geometry would extend the productive lifetime of the geothermal reservoir. The results produced from the DEM models showed that the reservoir geometry is very much dependent upon the joint angle, and under the Cooper Basin stress regime steeper joints will be more likely to open. Joint dilatancy also affects the fluid flow rates as the amount of joint opening is dependent upon the joint dilatancy angle. The modelling of the temperature drawdown of the rock due to the fluid flow showed that a square configuration of wells is the ideal configuration to prolong the productive lifespan of the HDR geothermal reservoir. Results produced with the modelling parameters provided by Geodynamics Limited indicate that the productive lifespan of the Cooper Basin HDR geothermal reservoir created is approximately 50 years. This reservoir is only one of many that can be created at the site to prolong the productivity of the energy plant. The combined results of this modelling strategy give an overall image of the creation and lifetime of the HDR geothermal energy plant in the Cooper Basin.

This thesis describes the development and production of numerical simulations of the creation of a Hot Dry Rock (HDR) geothermal reservoir. This geothermal reservoir that was simulated is owned by Geodynamics Limited and is located in the Cooper Basin, South Australia. The simulations show the geometry of the geothermal reservoir and predict the productive lifespan of the reservoir. Geothermal energy, which is the thermal energy that is stored in the interior of the earth, is an enormous energy source and as such there is great interest in technology that allows this energy to be harnessed. The HDR process of extracting the geothermal energy from rock involves drilling a borehole to a suitable depth and injecting cold water into the rock via this well (known as the injection well) to create a reservoir by opening up fractures in the rock. As water is forced through the reservoir, heat is extracted from the rock via conduction and transferred to the water, creating an heat exchange. Warm water is brought to the surface via another well known as the extraction well. The heat from the water is used to generate electricity and then the water is fed back into the injection well, completing the cycle. The creation of a HDR geothermal reservoir comprises of many aspects: the injection of the fluid into the jointed rock system, the opening and shearing of the joints, the creation of the fluid reservoir in the rock and the temperature effects of the fluid flow through the joints. This work incorporates all of these aspects. Due to the multi-physics nature of this process multiple computational modelling strategies were implemented to allow for authentic simulation of the entire process. The mechanical rock behaviour was primarily simulated the Distinct Element Method. This two dimensional Distinct Element Method program allowed for a realistically scaled model of the whole geothermal reservoir to be developed. This model was particularly useful for modelling the joint behaviour as the discrete nature of this method compares well with the joint system on such a scale. A discrete particle based model was used to model the joint behaviour on a small scale. These models demonstrated the behaviour of joints under compressional strain, showing slip and the effects of joint dilatancy. The productive lifespan of the geothermal reservoir was modelled using a Finite Element Method program based on Darcy's Law and an height-averaged heat equation. The aim of this model was to simulate the effects on the rock temperature of the fluid flow through the reservoir. The lifespan of the reservoir with differing well geometries was tested using this model to show which geometry would extend the productive lifetime of the geothermal reservoir. The results produced from the DEM models showed that the reservoir geometry is very much dependent upon the joint angle, and under the Cooper Basin stress regime steeper joints will be more likely to open. Joint dilatancy also affects the fluid flow rates as the amount of joint opening is dependent upon the joint dilatancy angle. The modelling of the temperature drawdown of the rock due to the fluid flow showed that a square configuration of wells is the ideal configuration to prolong the productive lifespan of the HDR geothermal reservoir. Results produced with the modelling parameters provided by Geodynamics Limited indicate that the productive lifespan of the Cooper Basin HDR geothermal reservoir created is approximately 50 years. This reservoir is only one of many that can be created at the site to prolong the productivity of the energy plant. The combined results of this modelling strategy give an overall image of the creation and lifetime of the HDR geothermal energy plant in the Cooper Basin.

This thesis describes the development and production of numerical simulations of the creation of a Hot Dry Rock (HDR) geothermal reservoir. This geothermal reservoir that was simulated is owned by Geodynamics Limited and is located in the Cooper Basin, South Australia. The simulations show the geometry of the geothermal reservoir and predict the productive lifespan of the reservoir. Geothermal energy, which is the thermal energy that is stored in the interior of the earth, is an enormous energy source and as such there is great interest in technology that allows this energy to be harnessed. The HDR process of extracting the geothermal energy from rock involves drilling a borehole to a suitable depth and injecting cold water into the rock via this well (known as the injection well) to create a reservoir by opening up fractures in the rock. As water is forced through the reservoir, heat is extracted from the rock via conduction and transferred to the water, creating an heat exchange. Warm water is brought to the surface via another well known as the extraction well. The heat from the water is used to generate electricity and then the water is fed back into the injection well, completing the cycle. The creation of a HDR geothermal reservoir comprises of many aspects: the injection of the fluid into the jointed rock system, the opening and shearing of the joints, the creation of the fluid reservoir in the rock and the temperature effects of the fluid flow through the joints. This work incorporates all of these aspects. Due to the multi-physics nature of this process multiple computational modelling strategies were implemented to allow for authentic simulation of the entire process. The mechanical rock behaviour was primarily simulated the Distinct Element Method. This two dimensional Distinct Element Method program allowed for a realistically scaled model of the whole geothermal reservoir to be developed. This model was particularly useful for modelling the joint behaviour as the discrete nature of this method compares well with the joint system on such a scale. A discrete particle based model was used to model the joint behaviour on a small scale. These models demonstrated the behaviour of joints under compressional strain, showing slip and the effects of joint dilatancy. The productive lifespan of the geothermal reservoir was modelled using a Finite Element Method program based on Darcy's Law and an height-averaged heat equation. The aim of this model was to simulate the effects on the rock temperature of the fluid flow through the reservoir. The lifespan of the reservoir with differing well geometries was tested using this model to show which geometry would extend the productive lifetime of the geothermal reservoir. The results produced from the DEM models showed that the reservoir geometry is very much dependent upon the joint angle, and under the Cooper Basin stress regime steeper joints will be more likely to open. Joint dilatancy also affects the fluid flow rates as the amount of joint opening is dependent upon the joint dilatancy angle. The modelling of the temperature drawdown of the rock due to the fluid flow showed that a square configuration of wells is the ideal configuration to prolong the productive lifespan of the HDR geothermal reservoir. Results produced with the modelling parameters provided by Geodynamics Limited indicate that the productive lifespan of the Cooper Basin HDR geothermal reservoir created is approximately 50 years. This reservoir is only one of many that can be created at the site to prolong the productivity of the energy plant. The combined results of this modelling strategy give an overall image of the creation and lifetime of the HDR geothermal energy plant in the Cooper Basin.

Thesis (Ph. D.)--University of Adelaide, National Centre for Petroleum Geology & Geophysics (NCPGG) /Dept. of Geology & Geophysics, 1993. / At head of title: "NERDDC/SENRAC Research Project." Three folded maps in pocket. Two microfiches in pocket. Includes bibliographical references (leaves 155-187).

Thesis (Ph.D.)--University of Adelaide, Dept. of Geology, 2000? / At head of title: National Centre for Petroleum Geology and Geophysics. CD-ROM contains Appendices (1-10) in PDF. Includes copies of papers co-authored by the author. Includes bibliographical references (leaves [471]-499 in vol. 2).

Thesis (Ph.D.)--University of Adelaide, National Centre for Petroleum Geology and Geophysics, 2002. / "September 2002" Includes bibliographical references (leaves 200-209).