The purpose of this thesis is to develop corotational beam elements for the nonlinear dynamic analyse of flexible beam structures. Whereas corotational beam elements in statics are well documented, the derivation of a corotational dynamic formulation is still an issue. In the first journal paper, an efficient dynamic corotational beam formulation is proposed for 2D analysis. The idea is to adopt the same corotational kinematic description in static and dynamic parts. The main novelty is to use cubic interpolations to derive both inertia terms and internal terms in order to capture correctly all inertia effects. This new formulation is compared with two classic formulations using constant Timoshenko and constant lumped mass matrices. In the second journal paper, several choices of parametrization and several time stepping methods are compared. To do so, four dynamic formulations are investigated. The corotational method is used to develop expressions of the internal terms, while the dynamic terms are formulated into a total Lagrangian context. Theoretical derivations as well as practical implementations are given in detail. Their numerical accuracy and computational efficiency are then compared. Moreover, four predictors and various possibilities to simplify the tangent inertia matrix are tested. In the third journal paper, a new consistent beam formulation is developed for 3D analysis. The novelty of the formulation lies in the use of the corotational framework to derive not only the internal force vector and the tangent stiffness matrix but also the inertia force vector and the tangent dynamic matrix. Cubic interpolations are adopted to formulate both inertia and internal local terms. In the derivation of the dynamic terms, an approximation for the local rotations is introduced and a concise expression for the global inertia force vector is obtained. Four numerical examples are considered to assess the performance of the new formulation against two other ones based on linear interpolations. Finally, in the fourth journal paper, the previous 3D corotational beam element is extended for the nonlinear dynamics of structures with thin-walled cross-section by introducing the warping deformations and the eccentricity of the shear center. This leads to additional terms in the expressions of the inertia force vector and the tangent dynamic matrix. The element has seven degrees of freedom at each node and cubic shape functions are used to interpolate local transversal displacements and axial rotations. The performance of the formulation is assessed through five examples and comparisons with Abaqus 3D-solid analyses. / <p>QC 20131017</p>

L’objectif de cette thèse est de proposer des éléments finis poutres corotationnels 2D et 3D pour l’analyse du comportement dynamique non-linéaire des structures à barres. La contribution majeure de cette thèse est l’utilisation de fonctions d’interpolations cubiques à la fois pour la détermination de l’expression des efforts internes mais aussi celle des termes d’inertie. En négligeant le carré du déplacement transversal dans le repère local, une expression analytique des termes dynamiques en 2D est obtenue. Sur base d’une étude comparative approfondie sur la paramétrisation des rotations et les algorithmes d’intégration temporelle et d’une approximation des rotations locales, nous proposons deux éléments finis poutre 3D précis et robustes. Contrairement au premier, le second élément 3D prend en compte les déformations de gauchissement et l'excentricité du centre de cisaillement. Les diverses comparaisons réalisées démontrent la pertinence des formulations proposées. / The purpose of this thesis is to propose several corotational beam formulations for both 2D and 3D nonlinear dynamic analyse of flexible structures. The main novelty of these formulations is that the cubic interpolation functions are used to derive not only the internal force vector and the tangent stiffness matrix but also the inertial force vector and the dynamic matrix. By neglecting the quadratic terms of the local transversal displacements, closed-form expressions for the inertial terms are obtained for 2D problems. Based on an extensive comparative study of the parameterizations of the finite rotations and the time stepping method, and by adopting an approximation of the local rotations, two consistent and effective beam formulations for 3D dynamics are developed. In contrast with the first formulation, the second one takes into account the warping deformations and the shear center eccentricity. The accuracy of these formulations is demonstrated through several numerical examples.

Flexible beam structures are popular in civil and mechanical engineering. Many of these structures undergo large displacements and finite rotations, but with small deformations. Their dynamic behaviors are usually investigated using finite beam elements. A well known method to derive such beam elements is the corotational approach. This method has been extensively used in nonlinear static analysis. However, its application in nonlinear dynamics is rather limited. The purpose of this thesis is to investigate the nonlinear dynamic behavior of flexible beam structures using the corotational method. For the 2D case, a new dynamic corotational beam formulation is presented. The idea is to adopt the same corotational kinetic description in static and dynamic parts. The main novelty is to use cubic interpolations to derive both inertia terms and internal terms in order to capture correctly all inertia effects. This new formulation is compared with two classic formulations using constant Timoshenko and constant lumped mass matrices. This work is presented in the first appended journal paper. For the 3D case, update procedures of finite rotations, which are central issues in development of nonlinear beam elements in dynamic analysis, are discussed. Three classic and one new formulations of beam elements based on the three different parameterizations of the finite rotations are presented. In these formulations, the corotational method is used to develop expressions of the internal forces and the tangent stiffness matrices, while the dynamic terms are formulated into a total Lagrangian context. Many aspects of the four formulations are investigated. First, theoretical derivations as well as practical implementations are given in details. The similarities and differences between the formulations are pointed out. Second, numerical accuracy and computational efficiency of these four formulations are compared. Regarding efficiency, the choice of the predictor at each time step and the possibility to simplify the tangent inertia matrix are carefully investigated. This work is presented in the second appended journal paper. To make this thesis self-contained, two chapters concerning the parametrization of the finite rotations and the derivation of the 3D corotational beam element in statics are added. / QC 20120521

The purpose of this thesis is to propose several corotational beam formulations for both 2D and 3D nonlinear dynamic analyse of flexible structures. The main novelty of these formulations is that the cubic interpolation functions are used to derive not only the internal force vector and the tangent stiffness matrix but also the inertial force vector and the dynamic matrix. By neglecting the quadratic terms of the local transversal displacements, closed-form expressions for the inertial terms are obtained for 2D problems. Based on an extensive comparative study of the parameterizations of the finite rotations and the time stepping method, and by adopting an approximation of the local rotations, two consistent and effective beam formulations for 3D dynamics are developed. In contrast with the first formulation, the second one takes into account the warping deformations and the shear center eccentricity. The accuracy of these formulations is demonstrated through several numerical examples.