Spelling suggestions: "subject:"covalent surface modification"" "subject:"kovalent surface modification""
1 |
Surface Chemistry Control of 2D Nanomaterial Morphologies, Optoelectronic Responses, and Physicochemical PropertiesLee, Jacob T. 05 1900 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / The field of two-dimensional (2D) nanomaterials first began in earnest with the discovery of graphene in 2004 due to their unique shape-dependent optical, electronic, and mechanical properties. These properties arise due to their one-dimensional confinement and are further influenced by the elemental composition of the inorganic crystal lattice. There has been an intense focus on developing new compositions of 2D nanomaterials to take advantage of their intrinsic beneficial properties in a variety of applications including catalysis, energy storage and harvesting, sensing, and polymer nanocomposites. However, compared to the field of bulk materials, the influence of surface chemistry on 2D nanomaterials is still underdeveloped.
2D nanomaterials are considered an “all-surface” atomic structure with heights of a single to few layers of atoms. The synthetic methods used to produce 2D materials include bottom-up colloidal methods and top-down exfoliation related techniques. Both cases result in poorly controlled surface chemistry with many undercoordinated surface atoms and/or undesirable molecules bound to the surface. Considering the importance surfaces play in most applications (i.e., catalysis and polymer processing) it is imperative to better understand how to manipulate the surface of 2D nanomaterials to unlock their full technological potential. Through a focus of the ligand-surface atom bonding in addition to the overall ligand structure we highlight the ability to direct morphological outcomes in lead free halide perovskites, maximize optoelectronic responses in substoichiometric tungsten oxide, and alter physicochemical properties titanium carbide MXenes.
The careful control of precursor materials including poly(ethylene glycol) (PEG) surface ligands during the synthesis of bismuth halide perovskites resulted in the formation of 2D quasi-Ruddlesden-Popper phase nanomaterials. Through small angle X-ray scattering (SAXS) and in conjunction with X-ray photoelectron spectroscopy (XPS) we were able to conclude that an in-situ formation of an amino functional group on our PEG-amine ligand was inserted into the perovskite crystal lattice enabling 2D morphology formation. Additionally, through UV-vis absorption and ultraviolet photoelectron spectroscopies we were able to develop a complete electronic band structure of materials containing varying halides (i.e., Cl, Br, and I). Furthermore, through the increased solubility profile of the PEG ligands we observed solvent controlled assemblies of varying mesostructures.
We developed an ex-situ ligand treatment to manipulate the localized surface plasmon resonance (LSPR) response of anion vacancy doped tungsten oxide (WO3-x) nanoplatelets (NPLs). Upon ligand treatment to alter the surface passivating ligand from carboxylic acid containing myristic acid (MA) to tetradecylphosphonic acid (TDPA) we observed a >100 nm blue shift in the LSPR response. Using Fourier transform infrared (FTIR) and Raman spectroscopies in conjunction with DFT calculated Raman spectra we were able to conclude this shift was due to the formation of tridentate phosphonate bonds on the NPLs surface. Phosphonate bonding allows for an increase in surface passivation per ligand decreasing surface trapped electrons. These previously trapped electrons were then able to participate as free electrons in the LSPR response. Electron paramagnetic spectroscopy (EPR) further supported this decrease in surface traps through a decrease and shift of the EPR signal related to metal oxide surface trapped electrons.
Lastly, using our knowledge of PEG ligands we were able to modify esterification chemistry to covalently attach PEG ligands to a MXene surface. The successful formation of an ester bond between a carboxylic acid containing PEG ligand and hydroxyl terminating group on the MXene surface was supported by FTIR spectroscopy and thermogravimetric analysis. The attachment of PEG resulted in a drastic change in the hydrophilicity of the MXene surface. Where MXenes were previously only processed in extremely polar solvents the PEG attachment allowed for high dispersibility in a wide range of polar and non-polar organic solvents, effectively increasing their processability. Further, this chemistry was modified to include an additional functional group on the PEG ligand to increase the valency of the post-modification MXene nanoflakes.
Overall, work presented in this dissertation represents the development and application of surface chemistry to relatively new 2D nanomaterials. We believe our work significantly increases the knowledge of 2D halide perovskite formation, manipulation of LSPR active metal oxide materials, and the future processing of MXene materials.
|
2 |
Single-Step Covalent Functionalization of Polylactide Surfaces / Nano Patterened Covalent Surface Modification of Poly(ε-caprolactone)Källrot, Martina January 2005 (has links)
<p>Degradable polymers have gained an increased attention in the field of biomedical applications over the past decades, for example in tissue engineering. One way of improving the biocompatibility of these polymers is by chemical surface modification, however the risk of degradation during the modification procedure is a limiting factor. In some biomedical applications, for example in nerve guides, a patterned surface is desired to improve the cell attachment and proliferation.</p><p>In this thesis a new non-destructive, single-step, and solvent free method for surface modification of degradable polymers is described. Poly(L-lactide) (PLLA) substrates have been functionalized with one of the following vinyl monomers; N-vinylpyrrolidone (VP), acrylamide (AAm), or maleic anhydride (MAH) grafts. The substrates were subjected to a vapor phase atmosphere constituted of a mixture of a vinyl monomer and a photoinitiator (benzophenone) in a closed chamber at very low pressure and under UV irradiation. Poly(ε-caprolactone) (PCL), poly(lactide-co-glycolide) (PLGA), and poly(trimethylene carbonate) (PTMC) have been surface modified with VP using the same procedure to show the versatility of the method. The wettability of all of the four substrates increased after grafting. The surface compositions were confirmed by ATR-FTIR and XPS. The VP grafted PLLA, PTMC and PLGA substrates have been shown to be good substrates for the normal human cells i.e. keratinocytes and fibroblasts, to adhere and proliferate on. The topography of substrates with well defined nano patterns was preserved during grafting, since the grafted layer is very thin. We have also shown that the method is useful for a simultaneous chemical and topographical modification of substrates by masked vapor phase grafting. The surface topography was determined with SEM and AFM.</p> / <p>Intresset för användningen av nedbrytbara polymerer till biomedicinska applikationer som till exempel vävnads rekonstruktion har ökat avsevärt de senaste decennierna. Ett sätt att öka biokompatibiliteten hos dessa polymerer är genom kemisk ytmodifiering, men risken för nedbrytning under själva modifieringen är en begränsande faktor. I vissa biomedicinska applikationer, till exempel nervguider, är det önskvärt att ha en väldefinierad ytstruktur för att öka vidhäftningen och tillväxten av celler.</p><p>I den här avhandlingen presenteras en ny ickeförstörande, lösningsmedelsfri enstegsprocess för ytmodifiering av nedbrytbara polymerer. Substrat av poly(L-laktid) (PLLA) har ytfunktionaliserats med var och en av följande vinylmonomerer, N-vinylpyrrolidon (VP), akrylamid (AAm) eller maleinsyraanhydrid (MAH). Substraten har exponerats för en gasfasatmosfär av en blandning av en vinylmonomer och en fotoinitiator (bensofenon) i en tillsluten reaktor vid mycket lågt tryck och under UV-strålning. Metodens mångsidighet har även påvisats genom att ytmodifiera substrat av poly(ε-kaprolakton) (PCL), poly(laktid-co-glykolid) (PLGA) och poly(trimetylen karbonat) (PTMC) med VP. Vätbarheten ökade för alla fyra materialen efter ympning med en vinylmonomer. Ytsammansättningen fastställdes med ATR-FTIR och XPS. De VP ympade filmerna av PLLA, PLGA och PTMC visade sig vara bra substrat för mänskliga celler, i detta fall keratinocyter och fibroblaster, att vidhäfta och växa på. Yttopografin hos filmer med väldefinierade nanomönstrade ytor kunde bevaras efter ympning, tack vare att det ympade lagret är så tunt. Gasfas metoden har också visat sig användbar för att simultant ytmodifiera både kemiskt och topografiskt genom maskad gasfasympning. Yttopografin bestämdes med SEM och AFM.</p>
|
3 |
Covalent Surface Modification of Degradable Polymers for Increased Biocompatibility / Nano Patterened Covalent Surface Modification of Poly(ε-caprolactone)Källrot, Martina January 2005 (has links)
Degradable polymers have gained an increased attention in the field of biomedical applications over the past decades, for example in tissue engineering. One way of improving the biocompatibility of these polymers is by chemical surface modification, however the risk of degradation during the modification procedure is a limiting factor. In some biomedical applications, for example in nerve guides, a patterned surface is desired to improve the cell attachment and proliferation. In this thesis a new non-destructive, single-step, and solvent free method for surface modification of degradable polymers is described. Poly(L-lactide) (PLLA) substrates have been functionalized with one of the following vinyl monomers; N-vinylpyrrolidone (VP), acrylamide (AAm), or maleic anhydride (MAH) grafts. The substrates were subjected to a vapor phase atmosphere constituted of a mixture of a vinyl monomer and a photoinitiator (benzophenone) in a closed chamber at very low pressure and under UV irradiation. Poly(ε-caprolactone) (PCL), poly(lactide-co-glycolide) (PLGA), and poly(trimethylene carbonate) (PTMC) have been surface modified with VP using the same procedure to show the versatility of the method. The wettability of all of the four substrates increased after grafting. The surface compositions were confirmed by ATR-FTIR and XPS. The VP grafted PLLA, PTMC and PLGA substrates have been shown to be good substrates for the normal human cells i.e. keratinocytes and fibroblasts, to adhere and proliferate on. The topography of substrates with well defined nano patterns was preserved during grafting, since the grafted layer is very thin. We have also shown that the method is useful for a simultaneous chemical and topographical modification of substrates by masked vapor phase grafting. The surface topography was determined with SEM and AFM. / Intresset för användningen av nedbrytbara polymerer till biomedicinska applikationer som till exempel vävnads rekonstruktion har ökat avsevärt de senaste decennierna. Ett sätt att öka biokompatibiliteten hos dessa polymerer är genom kemisk ytmodifiering, men risken för nedbrytning under själva modifieringen är en begränsande faktor. I vissa biomedicinska applikationer, till exempel nervguider, är det önskvärt att ha en väldefinierad ytstruktur för att öka vidhäftningen och tillväxten av celler. I den här avhandlingen presenteras en ny ickeförstörande, lösningsmedelsfri enstegsprocess för ytmodifiering av nedbrytbara polymerer. Substrat av poly(L-laktid) (PLLA) har ytfunktionaliserats med var och en av följande vinylmonomerer, N-vinylpyrrolidon (VP), akrylamid (AAm) eller maleinsyraanhydrid (MAH). Substraten har exponerats för en gasfasatmosfär av en blandning av en vinylmonomer och en fotoinitiator (bensofenon) i en tillsluten reaktor vid mycket lågt tryck och under UV-strålning. Metodens mångsidighet har även påvisats genom att ytmodifiera substrat av poly(ε-kaprolakton) (PCL), poly(laktid-co-glykolid) (PLGA) och poly(trimetylen karbonat) (PTMC) med VP. Vätbarheten ökade för alla fyra materialen efter ympning med en vinylmonomer. Ytsammansättningen fastställdes med ATR-FTIR och XPS. De VP ympade filmerna av PLLA, PLGA och PTMC visade sig vara bra substrat för mänskliga celler, i detta fall keratinocyter och fibroblaster, att vidhäfta och växa på. Yttopografin hos filmer med väldefinierade nanomönstrade ytor kunde bevaras efter ympning, tack vare att det ympade lagret är så tunt. Gasfas metoden har också visat sig användbar för att simultant ytmodifiera både kemiskt och topografiskt genom maskad gasfasympning. Yttopografin bestämdes med SEM och AFM. / QC 20101014
|
Page generated in 0.1399 seconds