No description available.

No description available.

Quartz Crystal Microbalance (QCM) is a sensitive and effective technique to analyze mass changes at the interface between a solid material and a liquid environment. In this Master thesis, QCM was employed for evaluating the interactions between selected degradable polymers and nanodiamond particles (nDP), fibronectin and the growth factor BMP-2.   Many parameters must be adapted to allow QCM measurements involving degradable polymers. These parameters were then tailored to allow QCM measurements with PLA, poly(LLA-co-CL), poly(TMC-D-LA) and PS.   Moreover, QCM provides quantitative measurements of protein adsorption on degradable polymers. The behavior of PLA and poly(LLA-co-CL) was further evaluated and compared with respect to protein adsorption. This behavior was demonstrated to be different for the two polymers considered and to be dependent on protein concentration in solution.   Eventually, exploiting QCM it was also possible to assess the relationship between nDP and the adsorption of fibronectin and BMP-2 onto PLA and poly(LLA-co-CL).

No description available.

No / Functional, degradable polymers were synthesized via the copolymerization of vinyl acetate (VAc) and 2-methylene-1,3-dioxepane (MDO) using a macro-xanthate CTA, poly(N-vinylpyrrolidone), resulting in the formation of amphiphilic block copolymers of poly(NVP)-b-poly(MDO-co-VAc). The behavior of the block copolymers in water was investigated and resulted in the formation of self-assembled nanoparticles containing a hydrophobic core and a hydrophilic corona. The size of the resultant nanoparticles was able to be tuned with variation of the hydrophilic and hydrophobic segments of the core and corona by changing the incorporation of the macro-CTA as well as the monomer composition in the copolymers, as observed by Dynamic Light Scattering, Static Light Scattering, and Transmission Electron Microscopy analyses. The concept was further applied to a VAc derivative monomer, vinyl bromobutanoate, to incorporate further functionalities such as fluorescent dithiomaleimide groups throughout the polymer backbone using azidation and “click” chemistry as postpolymerization tools to create fluorescently labeled nanoparticles. / University of Warwick, BP, The Royal Society

Natural compounds have been the primary resource used to produce polymeric materials by humankind since the mid-1900s. Yet, progress in bio-based polymers from renewable feedstock has encountered some obstacles, mainly due to the low prices of petroleum-based monomers, compared to natural and sustainable materials. However, most commodity plastics are non-degradable materials, and solid plastic waste accumulation adversely affects the environment. As the world population is growing and demanding chemicals, energy, and plastics materials, polymer research is focusing on synthesizing bio-based and degradable polymers. Thus, biomass, a sustainable and inexpensive feedstock, is highly appropriate for designing alternative thermoplastics that are degradable to reduce the current environmental issues. In this dissertation, three different approaches were used to afford alternative thermoplastics to petroleum‐based commodities: bio-based poly(ether-amide)s, random aromatic copolyesters, and copoly(acetal triazole)s. In our first approach, two new lignin‐derived poly(ether‐amide)s (PEA)s were prepared. Their thermal properties showed high degradation temperature (Td) ranging from 330 °C to 380 °C, and glass transition temperature (Tg) between 100 °C and 120 °C. The chemical degradation studies revealed that the PEAs were degradable in 4 M H2SO4, HNO3, and TFA in 3 days. The second polymer group synthesized were semicrystalline bio-based aromatic copolyesters with tunable thermal properties. The thermal analysis of these copolyesters revealed high Td (413 °C to 446 °C) and Tg and Tm ranging from –36 °C to 67 °C and 60 °C to 267 °C, respectively. Their crystallization behavior showed a dependence on the comonomer composition, exhibiting a pseudo-eutectic region. Finally, furfural- and benzaldehyde-based copoly(acetal triazole)s (Td range 280–340 °C) were prepared by click polymerization at room temperature. Preliminary results showed that furfural-based copoly(acetal triazole)s were susceptible to hydrolytic degradation under neutral conditions after only 8 days at 40 °C. Overall, degradable and bio-based polymers were successfully synthesized as a potential thermoplastic alternative for packaging applications.

No description available.

La réduction de l’impact des activités humaines sur l’environnement est au sujet de nombreux programmes de recherche. Ainsi, dans le domaine du transport aérien a été créé le projet Clean-Sky, regroupant les thèmes de recherche associés. La thèse, partie de ce dernier, a pour objectif de réduire l’impact environnemental de la production de composants en alliages avancés à base de Titane. La production actuelle ayant une empreinte écologique non négligeable, un procédé de fabrication alternatif est étudié, il s’agit du moulage par injection de poudres métalliques. La première partie de cette consiste donc en la recherche d’une formulation de mélange optimale parmi les solutions classiques et innovantes. Elles sont triées en fonction de leurs aptitudes, déterminées par caractérisations physico-chimiques, à assurer le bon déroulement de chaque étape du procédé. Un nombre réduit de solution étant ainsi dégagé, il s’agit de passer aux étapes d’injection, de déliantage et de frittage. Plusieurs géométries de pièces sont testées dans chacun de ces cas, afin de valider l’adaptation aux différentes contraintes imposées. Lors de ces trois phases, des analyses physico-chimiques complètes permettent de mettre en avant la ou les formulations les plus aptes à permettre la production de ces composants. Une fois la solution fixée, chaque étape du procédé est optimisées, afin de faciliter le transfert industriel et d’assurer la rentabilité du nouveau processus de fabrication. Ces travaux de doctorat ont permis de mettre en avant deux formulations, répondant aux critères définis en début de thèse. Les étapes de mélange, injection, déliantage et frittage ont été optimisées et le transfert industriel est possible. / Reducing the ecological footprint of human activities is, today, the aim of most of the research programs. In Europe, the « Clean Sky » project funds research activities to make air transport « greener ». This PhD, being part of it, is about improving production of Titanium Aluminide based components. Nowadays production having a strong environmental impact, an alternative way has been investigated: metal injection molding. The first step of this work was focused on a bibliographic study, to select relevant, common and innovative mixtures to be used in the process. Throughout the process, these mixtures have been tested, physically and chemically analyzed, to get data about the optimal mixture. Several components geometries have been tested, during injection, debinding, and sintering steps. Once the mixture(s) chosen, process’ parameters have been optimized to make industrial transfer easier, and lower its overall cost. The developments achieved during this PhD led to two qualified mixtures, and optimized mixing, molding, debinding and sintering steps.

<p>Degradable polymers have gained an increased attention in the field of biomedical applications over the past decades, for example in tissue engineering. One way of improving the biocompatibility of these polymers is by chemical surface modification, however the risk of degradation during the modification procedure is a limiting factor. In some biomedical applications, for example in nerve guides, a patterned surface is desired to improve the cell attachment and proliferation.</p><p>In this thesis a new non-destructive, single-step, and solvent free method for surface modification of degradable polymers is described. Poly(L-lactide) (PLLA) substrates have been functionalized with one of the following vinyl monomers; N-vinylpyrrolidone (VP), acrylamide (AAm), or maleic anhydride (MAH) grafts. The substrates were subjected to a vapor phase atmosphere constituted of a mixture of a vinyl monomer and a photoinitiator (benzophenone) in a closed chamber at very low pressure and under UV irradiation. Poly(ε-caprolactone) (PCL), poly(lactide-co-glycolide) (PLGA), and poly(trimethylene carbonate) (PTMC) have been surface modified with VP using the same procedure to show the versatility of the method. The wettability of all of the four substrates increased after grafting. The surface compositions were confirmed by ATR-FTIR and XPS. The VP grafted PLLA, PTMC and PLGA substrates have been shown to be good substrates for the normal human cells i.e. keratinocytes and fibroblasts, to adhere and proliferate on. The topography of substrates with well defined nano patterns was preserved during grafting, since the grafted layer is very thin. We have also shown that the method is useful for a simultaneous chemical and topographical modification of substrates by masked vapor phase grafting. The surface topography was determined with SEM and AFM.</p> / <p>Intresset för användningen av nedbrytbara polymerer till biomedicinska applikationer som till exempel vävnads rekonstruktion har ökat avsevärt de senaste decennierna. Ett sätt att öka biokompatibiliteten hos dessa polymerer är genom kemisk ytmodifiering, men risken för nedbrytning under själva modifieringen är en begränsande faktor. I vissa biomedicinska applikationer, till exempel nervguider, är det önskvärt att ha en väldefinierad ytstruktur för att öka vidhäftningen och tillväxten av celler.</p><p>I den här avhandlingen presenteras en ny ickeförstörande, lösningsmedelsfri enstegsprocess för ytmodifiering av nedbrytbara polymerer. Substrat av poly(L-laktid) (PLLA) har ytfunktionaliserats med var och en av följande vinylmonomerer, N-vinylpyrrolidon (VP), akrylamid (AAm) eller maleinsyraanhydrid (MAH). Substraten har exponerats för en gasfasatmosfär av en blandning av en vinylmonomer och en fotoinitiator (bensofenon) i en tillsluten reaktor vid mycket lågt tryck och under UV-strålning. Metodens mångsidighet har även påvisats genom att ytmodifiera substrat av poly(ε-kaprolakton) (PCL), poly(laktid-co-glykolid) (PLGA) och poly(trimetylen karbonat) (PTMC) med VP. Vätbarheten ökade för alla fyra materialen efter ympning med en vinylmonomer. Ytsammansättningen fastställdes med ATR-FTIR och XPS. De VP ympade filmerna av PLLA, PLGA och PTMC visade sig vara bra substrat för mänskliga celler, i detta fall keratinocyter och fibroblaster, att vidhäfta och växa på. Yttopografin hos filmer med väldefinierade nanomönstrade ytor kunde bevaras efter ympning, tack vare att det ympade lagret är så tunt. Gasfas metoden har också visat sig användbar för att simultant ytmodifiera både kemiskt och topografiskt genom maskad gasfasympning. Yttopografin bestämdes med SEM och AFM.</p>

Degradable polymers have gained an increased attention in the field of biomedical applications over the past decades, for example in tissue engineering. One way of improving the biocompatibility of these polymers is by chemical surface modification, however the risk of degradation during the modification procedure is a limiting factor. In some biomedical applications, for example in nerve guides, a patterned surface is desired to improve the cell attachment and proliferation. In this thesis a new non-destructive, single-step, and solvent free method for surface modification of degradable polymers is described. Poly(L-lactide) (PLLA) substrates have been functionalized with one of the following vinyl monomers; N-vinylpyrrolidone (VP), acrylamide (AAm), or maleic anhydride (MAH) grafts. The substrates were subjected to a vapor phase atmosphere constituted of a mixture of a vinyl monomer and a photoinitiator (benzophenone) in a closed chamber at very low pressure and under UV irradiation. Poly(ε-caprolactone) (PCL), poly(lactide-co-glycolide) (PLGA), and poly(trimethylene carbonate) (PTMC) have been surface modified with VP using the same procedure to show the versatility of the method. The wettability of all of the four substrates increased after grafting. The surface compositions were confirmed by ATR-FTIR and XPS. The VP grafted PLLA, PTMC and PLGA substrates have been shown to be good substrates for the normal human cells i.e. keratinocytes and fibroblasts, to adhere and proliferate on. The topography of substrates with well defined nano patterns was preserved during grafting, since the grafted layer is very thin. We have also shown that the method is useful for a simultaneous chemical and topographical modification of substrates by masked vapor phase grafting. The surface topography was determined with SEM and AFM. / Intresset för användningen av nedbrytbara polymerer till biomedicinska applikationer som till exempel vävnads rekonstruktion har ökat avsevärt de senaste decennierna. Ett sätt att öka biokompatibiliteten hos dessa polymerer är genom kemisk ytmodifiering, men risken för nedbrytning under själva modifieringen är en begränsande faktor. I vissa biomedicinska applikationer, till exempel nervguider, är det önskvärt att ha en väldefinierad ytstruktur för att öka vidhäftningen och tillväxten av celler. I den här avhandlingen presenteras en ny ickeförstörande, lösningsmedelsfri enstegsprocess för ytmodifiering av nedbrytbara polymerer. Substrat av poly(L-laktid) (PLLA) har ytfunktionaliserats med var och en av följande vinylmonomerer, N-vinylpyrrolidon (VP), akrylamid (AAm) eller maleinsyraanhydrid (MAH). Substraten har exponerats för en gasfasatmosfär av en blandning av en vinylmonomer och en fotoinitiator (bensofenon) i en tillsluten reaktor vid mycket lågt tryck och under UV-strålning. Metodens mångsidighet har även påvisats genom att ytmodifiera substrat av poly(ε-kaprolakton) (PCL), poly(laktid-co-glykolid) (PLGA) och poly(trimetylen karbonat) (PTMC) med VP. Vätbarheten ökade för alla fyra materialen efter ympning med en vinylmonomer. Ytsammansättningen fastställdes med ATR-FTIR och XPS. De VP ympade filmerna av PLLA, PLGA och PTMC visade sig vara bra substrat för mänskliga celler, i detta fall keratinocyter och fibroblaster, att vidhäfta och växa på. Yttopografin hos filmer med väldefinierade nanomönstrade ytor kunde bevaras efter ympning, tack vare att det ympade lagret är så tunt. Gasfas metoden har också visat sig användbar för att simultant ytmodifiera både kemiskt och topografiskt genom maskad gasfasympning. Yttopografin bestämdes med SEM och AFM. / QC 20101014