Spelling suggestions: "subject:"crackgrowth"" "subject:"bankgrowth""
31 |
Stochastic modeling of fatigue crack growthVerma, Dhirendra January 1990 (has links)
No description available.
|
32 |
Fatigue acceleration of crack growth in medium density polyethyleneEzzat, Showaib A. January 1993 (has links)
No description available.
|
33 |
The conjunctive use of bonded repairs and crack growth retardation techniquesKieboom, Orio Terry, Aerospace, Civil & Mechanical Engineering, Australian Defence Force Academy, UNSW January 2007 (has links)
In an attempt to find a way of improving the damage tolerance of composite bonded repairs to metallic aircraft structures, the effect of using conventional crack growth retardation techniques in conjunction with bonded repairs was experimentally investigated. Hence, an experimental test program was set up to determine whether fatigue crack growth under bonded repairs is retarded further by giving the crack to be repaired a crack growth retardation treatment prior to repair patch application. In addition, it was set up to determine the influence of a bonded repair on the effectiveness of a crack growth retardation method. Centrally cracked aluminium plates were used. Stop drilling followed by cold hole expansion and the application of single overloads were selected as retardation treatments. Two patch materials were considered; boron/epoxy and Glare 2. Further test variables were the aluminium alloy and the plate thickness. Fatigue testing was carried out under constant amplitude loading and baseline results were determined first. In addition to optically monitoring the crack growth, local and global out-of-plane deformations were visualised with holographic interferometry and shadow moire??. Furthermore, the stress intensity factors under the repair patch were examined with strain gauges and measurement of the central crack opening displacement. Disbonds and fracture surfaces were studied after residual strength tests. The crack growth results obtained showed that retardation treatments decrease crack growth rates under a repair patch and that the effectiveness of a retardation treatment is increased by the patch. Although identical crack growth rates were observed under boron/epoxy and Glare 2 patches, the reinitiation period after the retardation treatment lasted longer when Glare 2 patches were applied. Analytical predictions of the extent of retardation based on existing models showed that the conjunctive effect of retardation treatments and bonded repairs was underestimated. A sustained reduction in crack growth rates was observed under bonded repairs with a prior overload retardation treatment. It was concluded that the damage tolerance of bonded repairs is increased by the application of a crack growth retardation treatment because the crack growth is retarded further. These findings indicate that the range of cracks in aircraft for which bonded repairs can be considered is expanded and that economic benefits can be obtained.
|
34 |
The conjunctive use of bonded repairs and crack growth retardation techniquesKieboom, Orio Terry, Aerospace, Civil & Mechanical Engineering, Australian Defence Force Academy, UNSW January 2007 (has links)
In an attempt to find a way of improving the damage tolerance of composite bonded repairs to metallic aircraft structures, the effect of using conventional crack growth retardation techniques in conjunction with bonded repairs was experimentally investigated. Hence, an experimental test program was set up to determine whether fatigue crack growth under bonded repairs is retarded further by giving the crack to be repaired a crack growth retardation treatment prior to repair patch application. In addition, it was set up to determine the influence of a bonded repair on the effectiveness of a crack growth retardation method. Centrally cracked aluminium plates were used. Stop drilling followed by cold hole expansion and the application of single overloads were selected as retardation treatments. Two patch materials were considered; boron/epoxy and Glare 2. Further test variables were the aluminium alloy and the plate thickness. Fatigue testing was carried out under constant amplitude loading and baseline results were determined first. In addition to optically monitoring the crack growth, local and global out-of-plane deformations were visualised with holographic interferometry and shadow moire??. Furthermore, the stress intensity factors under the repair patch were examined with strain gauges and measurement of the central crack opening displacement. Disbonds and fracture surfaces were studied after residual strength tests. The crack growth results obtained showed that retardation treatments decrease crack growth rates under a repair patch and that the effectiveness of a retardation treatment is increased by the patch. Although identical crack growth rates were observed under boron/epoxy and Glare 2 patches, the reinitiation period after the retardation treatment lasted longer when Glare 2 patches were applied. Analytical predictions of the extent of retardation based on existing models showed that the conjunctive effect of retardation treatments and bonded repairs was underestimated. A sustained reduction in crack growth rates was observed under bonded repairs with a prior overload retardation treatment. It was concluded that the damage tolerance of bonded repairs is increased by the application of a crack growth retardation treatment because the crack growth is retarded further. These findings indicate that the range of cracks in aircraft for which bonded repairs can be considered is expanded and that economic benefits can be obtained.
|
35 |
The role of visco-elasticity on the crack growth behaviour of rubberTsunoda, Katsuhiko January 2001 (has links)
This thesis concerns crack growth phenomena in rubber. It is widely known that a relationship exists between the magnitude of the stored energy release rate available to drive a crack, called the tearing energy (7'), and the resultant crack growth rate. For rubbers this basic relationship is said to be a characteristic of the material. The magnitude of T is related to both the visco-elastic losses and the crack tip diameter (d) However the actual size of d and its relationship with the viscoelastic losses is not clear. This thesis examines the crack growth behaviour in relation to d and the visco-elastic losses for a wide range of rubbers, whose visco-elastic properties are altered either by swelling in a liquid, altering the test temperature or the cross-link density and by the incorporation of fillers. Static, constant T, crack growth tests were carried out. These revealed that two different crack growth processes exist. For the fast crack growth process, T is determined by variations in the visco-elastic losses alone. For the slow crack growth process, T is determined by variations in both the visco-elastic losses and d. It is proposed here that the factors, which alter d, are associated with cavitation ahead of the crack tip for unfilled materials and with strength anisotropy for carbon black filled materials. In cyclic crack growth tests, the crack growth per cycle, dc/dn, can be considered to result from the sum of time and cyclic dependent crack growth components. For the first time, the detailed magnitudes of the contribution of each of these components to dc/dn have been determined, for a wide range of materials and mechanisms responsible for this behaviour are postulated. Also crack growth tests, both static and cyclic, were extended to very large extensions. Lastly this investigation revealed that the tensile strength for both ciystallising and noncrystallising rubber can be predicted using the tearing energy concept for a variety of loading regimes.
|
36 |
Fatigue crack growth of filled elastomersRatsimba, Christian H. H. January 2000 (has links)
In the past, the use of a fracture mechanics approach to describe crack growth in elastomers has been shown to work well for specimens of simple test geometry, simply loaded. This has been the case because elastic strain energy density (e.s.e.d.) functions could reliably be used to calculate both the magnitude of elastic stored energy available to drive a crack and the magnitude of the rate of release of such energy as the crack grows. The aim of this thesis was to investigate the applicability of such a methodology to situations of more complex loading. To this end two novel test-piece geometries were developed. The first consisted of a pure shear geometry with the sample having been pre-strained in the longitudinal direction to varying extents, hence introducing a type of bi-axial deformation. The second consisted of a pure shear geometry test-piece inclined at 30° to the horizontal and loaded in the vertical direction, hence inducing simultaneously pure shear and simple shear loading. Both types of test-piece were used to study the validity of the particular e.s.e.d. functions, the energetics and mechanics of crack growth and crack growth geometries on a macro and micro scale. The constants in particular e.s.e.d. functions were determined by uniaxially deforming in pure shear each of the carbon black reinforced materials used in this study. The resulting functions became progressively less good at predicting the elastic strain energy in the novel geometry test-pieces as the deformation modes became more complex. Anisotropy induced by deforming specimens in one direction was not easily removed even by an imposed large deformation in another direction. Nevertheless, the functions were successfully used to predict crack growth directions in the 30° inclined test-piece. However in the pre-strain pure shear test-pieces the functions significantly underestimated the elastic strain energy. Hence the real energies had to be determined from the forces and extensions measured during cyclic crack growth tests. In these tests crack growth rates for a given tearing energy (elastic energy release rate) increased as the magnitude of the pre-strain increased. This significant weakening was associated with the development of a strain induced molecular and carbon black anisotropy.
|
37 |
Statistical models for prediction of mechanical property and manufacturing process parameters for gas pipeline steelsJanuary 2018 (has links)
abstract: Pipeline infrastructure forms a vital aspect of the United States economy and standard of living. A majority of the current pipeline systems were installed in the early 1900’s and often lack a reliable database reporting the mechanical properties, and information about manufacturing and installation, thereby raising a concern for their safety and integrity. Testing for the aging pipe strength and toughness estimation without interrupting the transmission and operations thus becomes important. The state-of-the-art techniques tend to focus on the single modality deterministic estimation of pipe strength and do not account for inhomogeneity and uncertainties, many others appear to rely on destructive means. These gaps provide an impetus for novel methods to better characterize the pipe material properties. The focus of this study is the design of a Bayesian Network information fusion model for the prediction of accurate probabilistic pipe strength and consequently the maximum allowable operating pressure. A multimodal diagnosis is performed by assessing the mechanical property variation within the pipe in terms of material property measurements, such as microstructure, composition, hardness and other mechanical properties through experimental analysis, which are then integrated with the Bayesian network model that uses a Markov chain Monte Carlo (MCMC) algorithm. Prototype testing is carried out for model verification, validation and demonstration and data training of the model is employed to obtain a more accurate measure of the probabilistic pipe strength. With a view of providing a holistic measure of material performance in service, the fatigue properties of the pipe steel are investigated. The variation in the fatigue crack growth rate (da/dN) along the direction of the pipe wall thickness is studied in relation to the microstructure and the material constants for the crack growth have been reported. A combination of imaging and composition analysis is incorporated to study the fracture surface of the fatigue specimen. Finally, some well-known statistical inference models are employed for prediction of manufacturing process parameters for steel pipelines. The adaptability of the small datasets for the accuracy of the prediction outcomes is discussed and the models are compared for their performance. / Dissertation/Thesis / Doctoral Dissertation Materials Science and Engineering 2018
|
38 |
Fracture processes in simulated HAZ microstructures of stainless steelChang, Chung-Shing January 2000 (has links)
No description available.
|
39 |
Very high cycle fatigue of tool steelsKazymyrovych, Vitaliy January 2010 (has links)
An increasing number of engineering components are expected to have fatigue life in the range of 107 - 1010 load cycles. Some examples of such components are found in airplanes, automobiles and high speed trains. For many materials fatigue failures have lately been reported to occur well after 107 load cycles, namely in the Very High Cycle Fatigue (VHCF) range. This finding contradicts the established concept of a fatigue limit, which postulates that having sustained around 107 load cycles the material is capable of enduring an infinite number of cycles provided that the service conditions are unchanged. With the development of modern ultrasonic fatigue testing equipment it became possible to experimentally establish VHCF behaviour of various materials. For many of them the existence of the fatigue limit at 107 load cycles has been proved wrong and their fatigue strength continues to decrease with increasing number of load cycles. High performance steels is an important group of materials used for the components subjected to VHCF. This study explores the VHCF phenomenon using experimental data generated by ultrasonic fatigue testing of selected tool steels. The overall aim is to gain knowledge of VHCF behaviour of some common tool steel grades, while establishing a fundamental understanding of mechanisms for crack development in the very long life regime. The study demonstrates that VHCF cracks in tested steels initiate from microstructural defects like slag inclusions, large carbides or voids. It is established that VHCF life is almost exclusively spent during crack formation at below threshold stress intensity values which results in a unique for VHCF morphology on the fracture surface. Significant attention is devoted in the thesis to the ultrasonic fatigue testing technique, i.e. the validity and applicability of its results. FEM is employed to give an additional perspective to the study. It was used to calculate local stresses at fatigue initiating defects; examine the effect of material damping on ultrasonic stresses; and to evaluate various specimen geometries with respect to resulting stress gradient and maximum stressed material volume.
|
40 |
Fatigue crack growth rates under variable amplitude load spectra containing tensile underloadsZitounis, Vasilios January 2003 (has links)
An extensive research program was performed to investigate the load interaction effect of the combined action of small amplitude high R ratio cycles and large amplitude low R ratio underloads on the crack growth of large cracks. The study was driven by the needs of the damage tolerance approach in the helicopter structures, which requires robust knowledge on the crack growth behaviour of the advance high strength alloys under the characteristic helicopter spectra loading. The study was conducted on three metallic alloys, Ti-10V-2Fe-3Al, Al8090 T852 and Al7010 T76351 using compact tension specimens (w=70mm, t=17mm). The potential drop technique was used for the measurements of the crack length. The crack opening loads were determined from the applied load versus crack opening mouth displacement curve using a curve fitting technique and crack opening displacement gauge. The experimental results show that cracks can grow faster than the life predictions with no load interaction effects under spectra containing tensile underloads. The acceleration effects are different depending on the number of the small cycles, the Kmax, the R ratio of the small cycles, the underload cycle and the material. Significant closure observations on the underloads and on the small cycles of variable amplitude loading spectra were made. Based on the test finding and on the studies of other researchers, it is suggested that the acceleration effects are mainly due to the reduction of crack opening point of the tensile underloads comparing with the Constant Amplitude Loading (CAL) data. An extensive evaluation of the ability of FASTRAN model to predict the fatigue lives under the tested loading spectra was carried out. The evaluation focuses on the influence of the constraint factor a and the ∆Keff curve inputs on the predictions. The model produces very good and consistent predictions for the three alloys, when the inputs represent adequately the actual fatigue mechanism. The model predicts the measured acceleration effects by reducing the closure level of the underloads.
|
Page generated in 0.0638 seconds