<p>Periodic signal modeling plays an important role in different fields. The unifying theme of this thesis is using nonlinear techniques to model periodic signals. The suggested techniques utilize the user pre-knowledge about the signal waveform. This gives these techniques an advantage as compared to others that do not consider such priors.</p><p>The technique of Part I relies on the fact that a sine wave that is passed through a static nonlinear function produces a harmonic spectrum of overtones. Consequently, the estimated signal model can be parameterized as a known periodic function (with unknown frequency) in cascade with an unknown static nonlinearity. The unknown frequency and the parameters of the static nonlinearity are estimated simultaneously using the recursive prediction error method (RPEM). A treatment of the local convergence properties of the RPEM is provided. Also, an adaptive grid point algorithm is introduced to estimate the unknown frequency and the parameters of the static nonlinearity in a number of adaptively estimated grid points. This gives the RPEM more freedom to select the grid points and hence reduces modeling errors.</p><p>Limit cycle oscillations problem are encountered in many applications. Therefore, mathematical modeling of limit cycles becomes an essential topic that helps to better understand and/or to avoid limit cycle oscillations in different fields. In Part II, a second-order nonlinear ODE is used to model the periodic signal as a limit cycle oscillation. The right hand side of the ODE model is parameterized using a polynomial function in the states, and then discretized to allow for the implementation of different identification algorithms. Hence, it is possible to obtain highly accurate models by only estimating a few parameters.</p><p>In Part III, different user aspects for the two nonlinear approaches of the thesis are discussed. Finally, topics for future research are presented. </p>

Periodic signal modeling plays an important role in different fields. The unifying theme of this thesis is using nonlinear techniques to model periodic signals. The suggested techniques utilize the user pre-knowledge about the signal waveform. This gives these techniques an advantage as compared to others that do not consider such priors. The technique of Part I relies on the fact that a sine wave that is passed through a static nonlinear function produces a harmonic spectrum of overtones. Consequently, the estimated signal model can be parameterized as a known periodic function (with unknown frequency) in cascade with an unknown static nonlinearity. The unknown frequency and the parameters of the static nonlinearity are estimated simultaneously using the recursive prediction error method (RPEM). A treatment of the local convergence properties of the RPEM is provided. Also, an adaptive grid point algorithm is introduced to estimate the unknown frequency and the parameters of the static nonlinearity in a number of adaptively estimated grid points. This gives the RPEM more freedom to select the grid points and hence reduces modeling errors. Limit cycle oscillations problem are encountered in many applications. Therefore, mathematical modeling of limit cycles becomes an essential topic that helps to better understand and/or to avoid limit cycle oscillations in different fields. In Part II, a second-order nonlinear ODE is used to model the periodic signal as a limit cycle oscillation. The right hand side of the ODE model is parameterized using a polynomial function in the states, and then discretized to allow for the implementation of different identification algorithms. Hence, it is possible to obtain highly accurate models by only estimating a few parameters. In Part III, different user aspects for the two nonlinear approaches of the thesis are discussed. Finally, topics for future research are presented.

La connaissance de l'environnement marin est nécessaire pour un grand nombre d'applications dans le domaine de l'acoustique sous-marine comme la communication, la localisation et détection sonar et la surveillance des mammifères marins. Il constitue le moyen principal pour éviter les interférences néfastes entre le milieu naturel et les actions industriels et militaires conduites en zones côtières.Notre travail de thèse se place dans un contexte de sonar actif avec des fréquences allant de 1 kHz à 10 kHz pour des distances de propagations allant de 1 km à plusieurs dizaines de kilomètres. Nous nous intéressons particulièrement aux environnements de propagation grands fonds, à l'utilisation des antennes industrielles comme les antennes de flancs, les antennes cylindriques et les antennes linéaires remorquées, et à l'utilisation de signaux large bande afin de travailler avec des résolutions en distance et en vitesse très élevées. Le travail de recherche présenté dans ce mémoire est dédié à la recherche de nouveaux paramètres discriminants pour la classification de cible sous-marine en sonar actif et notamment à l'estimation de l'immersion instantanée.Cette étude présente : (1) les calculs de nouvelles bornes de Cramer-Rao pour la position d'une cible en distance en et en profondeur, (2) l'estimation conjointe de la distance et de l'immersion d'une cible à partir de la mesure des temps d'arrivées et des angles d'élévations sur une antenne surfacique et (3) l'estimation conjointe de la distance, de l'immersion et du gisement d'une cible à partir de la mesure des temps d'arrivées et des pseudo-gisements sur une antenne linéaire remorquée.Les méthodes développées lors de cette étude ont été validées sur des simulations, des données expérimentales à petite échelle et des données réelles en mer. / The knowledge of the marine environment is required for many underwater applications such as communications, sonar localization and detection, and marine mammals monitoring. It enables preventing harmful interference between the natural environment and industrial and military actions in coastal areas.This thesis work concentrates upton the context of active sonar with frequencies from 1 kHz to 10 kHz and long propagation ranges from 1 km to several tens of kilometers. We also concentrates upon deep water environment, the use of industrial arrays such as cylindrical arrays, flank arrays and linear towed arrays, and the use of large time-bandwidth signals in order to obtain high distance and speed resolutions. This research work is dedicated to the research of new features for the underwater target classification in active sonar, and specifically to the instantaneous target-depth estimation.This thesis presents: (1) calculations of new Cramer-Rao bounds for the target-position in range and in depth, (2) the joint estimation of the target-depth and the target-range from the arrival time and elevation angle measures with a surface array, (3) the joint estimation of the target-depth, the target-range and the target-bearing from the arrival time and pseudo-bearing angle measures with a linear towed array.The methods presented in this manuscript have been benchmarked on simulation, on reduced-scale experimental data and real marine data.

Sensor network performance is governed by the physical placement of sensors and their geometric relationship to the events they measure. To illustrate this, the entirety of this thesis covers the following interconnected subjects: 1) graphical analysis of the variance of the estimation error caused by physical characteristics of an acoustic target source and its geometric location relative to sensor arrays, 2) event/anomaly detection method for time aggregated point sensor data using a parametric Poisson distribution data model, 3) a sensor reduction or placement technique using Bellman optimal estimates of target agent dynamics and probabilistic training data (Goode, Chin, & Roan, 2011), and 4) transforming event monitoring point sensor data into event detection and classification of the direction of travel using a contextual, joint probability, causal relationship, sliding window, and geospatial intelligence (GEOINT) method. / Master of Science

This thesis deals with the problem of estimating the velocity of a mobile station (MS)in a mobile communication system using the instantaneous frequency (IF) of the received signal at the MS antenna. This estimate is essential for satisfactory handover performance, effective dynamic channel assignment, and optimisation of adaptive multiple access wireless receivers. Conventional methods for estimating the MS velocity are based either on the statistics of the envelope or quadrature components of the received signal. In chapter 4 of the thesis, we show that their performance deteriorates in the presence of shadowing. Other velocity estimators have also been proposed which require prior estimation of the channel or the average received power. These are generally difficult to obtain due to the non-stationary nature of the received signal. An appropriate window which depends on the unknown MS velocity must first be applied in order to accurately estimate the required quantities. Using the statistics of the IF of the received signal at the MS antenna given in chapter 3, new velocity estimators are proposed in chapter 4 of this thesis. The proposed estimators are based on the moments, zero-crossing rate, and covariance of the received IF. Since the IF of the received signal is not affected by any amplitude distortion, the proposed IF-based estimators are robust to shadowing and propagation path-loss. The estimators for the MS velocity in a macro- and micro-cellular system are presented separately. A macro-cell system can be considered as a special case of a micro-cell in which there is no line-of-sight component at the receiver antenna. It follows that those estimators which are derived for micro-cells can be used in a macro-cell as well. In chapter 4, we analyse the performance of the proposed velocity estimators in the presence of additive noise, non-isotropic scattering, and shadowing. We also prove analytically that the proposed velocity estimators outperform the existing methods in the presence of shadowing and additive noise. The proposed IF-based estimators need prior estimation of both the IF of the received signal and Ricean K-factor. The IF estimation in a typical wireless environment, can be considered as a special case of a general problem of IF estimation in the presence of multiplicative and additive noise. In chapter 5, we show that current time-frequency approaches to this problem which are based on the peak of a time-frequency distribution (TFD) of the signal, fail because of the special shape of the power spectral density of the multiplicative noise in a wireless environment. To overcome this drawback, the use of the first-order moment of a TFD is studied in chapter 5. Theoretical analysis and simulations show that the IF estimator based on the first-order moment of a TFD exhibits negligible bias when the signal-to-additive noise ratio is more than 10 dB. The Ricean K-factor is not only necessary for velocity estimation in micro-cells, but also is a measure of the severity of fading and a good indicator of the channel quality. Two new methods for estimating the Ricean K-factor based on the first two moments of the envelope of the received signal, are proposed in chapter 6. Performance analysis presented in chapter 6, prove that the proposed K estimators are robust to non-isotropic scattering. Theoretical analysis and simulations which are presented in chapters 4 and 7 of this thesis, prove that the proposed velocity and K estimators outperform existing estimators in the presence of shadowing and additive noise.