Thesis (doctoral)--Université de Neuchatel.

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1991. / Vita. Abstract. Includes bibliographical references (leaves 76-81). Also available via the Internet.

The social definition of the theatre as an expressive art and a place for individual creativity shapes’ the introduction of computers in the theatre. In a study of the development of computer usage in theatre, the issue of creativity must be addressed in order to fully understand technological implementation. In other areas of society, such as business, industry and government, computer implementation does not have to address the issue of creativity. In these areas, the issue is integrating the computer into established activities with the least amount of disruption. In theatre, however, the creativity issue is an underlying concern for the integration of computer systems in some areas. Computers are more readily accepted in administration, where the work tends to be more structured and repeatable. In the design areas, with the emphasis on individual creativity, the computer has been adopted more slowly. / Master of Science

This dissertation studies the relationship between collaboration networks and scientific creativity. It finds significant knowledge spillover from new collaborations to repeated collaborations, and proposes a network approach to understand scientific creativity at the egocentric network level beyond the boundary of teams. To understand the network effect (specifically, effects of tie strength) on creativity, it integrates literature on small groups and social networks and adopts a creative-process model. An inverted U-shaped relationship between tie strength and creativity is observed, because of the mixed impacts of tie strength at different stages of the creative process. Furthermore, it explores the effect of tie configurations and finds that the skewness of tie strength distribution moderates the effect of tie strength. In addition, it also tests two competing explanations for the association between strong tie and low creativity: creativity-decline hypothesis versus cost-reduction hypothesis. Finally, there is no evidence that collaboration networks would raise the visibility of previously published papers, but there is a significant prestige effect in gaining citations.

M.Ed. / Computer Studies as a school subject consists of a theory and a practical component. The practical component refers to programming. In programming the student has to design a algorithm. Problems can be solved with step by step approaches which lead to the final instruction that will solve the problem. This sequence of instructions that lead to problem solving is called an algorithm. There is more than one algorithm that will solve the same problem. There is no fixed recipe but only guidelines that assist the student to design an algorithm. During the designing of an algorithm the student gets the opportunity to be creative. The practical component of computer studies provides the ideal situation in which the student can solve a problem in his own way. Because of the nature of computer studies which is problem solving the opportunity arises where one can expose his creative talent. The situation unfortunately today exists where some teachers lack experience and training. To determine whether a specific algorithm solves a problem the inexperienced teacher should use a computer. Teachers that prefer to mark algorithms with a memorandum hamper the creativity of students. Although most teachers do have the necessary academic background they were not properly trained in the subject didactics of computer studies.

According to Dorst and Dijkhuis (1995) the two principal paradigms governing design activity discourse, are Simon's rational problem solving, and Schon's theory of design as a 'reflective conversation with the situation'. The rational problem solving view, that a fixed problem space structures design activity, has reduced the designer to a 'missing person' within design activity research (Dorst & Reymen 2004). This thesis aims to highlight the agency of the designer in structuring and motivating socially situated design activity. Dorst's (2006) framework of 'design paradoxes' suggests that design problems are evolving and unknowable. Design situations are determined through the designer's reinterpretation of the social discourses underpinning design situations, in a similar way to 'problem setting' within 'reflection-in-action' (Schon 1983). While Dorst suggests interpretation relies on intuition, problem setting relies on 'professional artistry' which is 'bounded' by the 'appreciative system' (personal knowledge, values and beliefs) and is essentially 'learnable' (Schon 1983). This thesis explores the correspondence between Schon's theory and contemporary frameworks including 'design paradoxes' (Dorst 2006), 'designerly ways of knowing' (Cross 1982), 'organising principles' (Rowe 1987), and 'creative problem construction' (Mumford et al 2004). It investigates the agency of the designer as evidenced in the use of the 'appreciative system'. This is elucidated using case study analysis of a novice designer, within a tertiary design degree. The case reveals the structured and motivated use of the designer's appreciative system. It indicates the deployment of 'appreciative goals' are fundamental to the 'linking behaviour of designers' (Dorst 2006), enabling design to begin in the absence of 'repertoire' or domain knowledge (Schon 1983), and the acquisition of new repertoire knowledge. These emergent findings offer new pedagogical perspectives both in terms of design expertise, which is normally associated with domain knowledge, and educating domain independent, multidisciplinary designers. Frames or similar 'organising principles' operate in most design fields, and create a 'principle of relevance' for knowledge from multiple domains and disciplines (Buchanan 1992). An awareness and acknowledgement of the objective function of subjective personal and social knowledge is essential in order to locate the 'missing' designer and understand innovative design activity.

Products are designed to satisfy user needs. Thus, industrial designers are expected to have a thorough understanding of user needs and to incorporate those understandings into the design of products; however, it is not a straightforward task for designers to translate their conditional understanding into a product. The gap between product and user can be even wider when latent user needs, such as cultural ones, are calculated into the problem. Therefore the meanings and functions imbued in products by the designer may not be recognized and acknowledged by users, due to the differences in cultural preferences of designers and users from separate cultures. In spite of the fact that user satisfaction has been extensively supported in the design literature, it seems that such an approach allows only a passive role for designers, who actually act as cultural intermediaries; that is, the designers' role is merely presumed to catalyze the process and match user requirements to the end product. Thus, the impact of designers' cultural preferences is considered as incidental, or at least overlooked. A content analysis method was triangulated to collect and analyze diverse visual and textual data relating to the concept generation stage of the product development process. To collect data, professional industrial designers in the two culturally diverse countries of Australia and Iran were recruited to participate in half-hour design exercise sessions to sketch to a design brief, followed by responding to an interview questionnaire. The analysis of data revealed that: (1) designers' cultural preferences do influence their approaches toward tackling the design problem; (2) there are nexuses between the design aspects of the concepts generated and the cultural dimensions of the values of the societies in which the designers were born and has lived, and; (3)potential users can unconsciously comprehend the meaning invested in the product by the designer. This thesis breaks new ground for further advancing the study of the Designer-Precedent Approach (DPA) in other cultural and social contexts, while it challenges the conventional approaches of user-centered design (UCD) broadlyperceived as the ultimate method of incorporating users' wants into products.

This work proposes a framework of concept generation and evaluation that takes into consideration the benefit of creativity and innovation in current market trends. By educating engineers in how to increase creativity in concept design and assess it quantitatively, the next generation of designers will be a step ahead of the market. This research begins with an in-depth survey of current creativity assessment methods in engineering in order to determine where the limitations currently lie in this field of study. The limitations discovered based on this unique analysis were used as motivation for the development of the proposed creativity assessment method. Specifically, we introduce a set of metrics that break down concepts to their component and subfunction level to assess the novelty and quality of component solutions ��� called the Comparative Creativity Assessment (CCA) Method. Secondly, we break down market-tested innovative products to isolate innovation information to utilize in concept generation inspiration ��� called the Repository of Innovative Products (RIP). Finally, revisions to the initial CCA method and RIP are proposed and analysis of past data results are compared to the new revised results. Revisions to the CCA method include additional metrics that factor in interaction effects from function pairing and component assemblies deemed innovative as well as eliminate evaluator subjectivity in the analysis. Observations from the experiments conducted are presented in a Lessons Learned chapter. / Graduation date: 2013

Products are designed to satisfy user needs. Thus, industrial designers are expected to have a thorough understanding of user needs and to incorporate those understandings into the design of products; however, it is not a straightforward task for designers to translate their conditional understanding into a product. The gap between product and user can be even wider when latent user needs, such as cultural ones, are calculated into the problem. Therefore the meanings and functions imbued in products by the designer may not be recognized and acknowledged by users, due to the differences in cultural preferences of designers and users from separate cultures. In spite of the fact that user satisfaction has been extensively supported in the design literature, it seems that such an approach allows only a passive role for designers, who actually act as cultural intermediaries; that is, the designers' role is merely presumed to catalyze the process and match user requirements to the end product. Thus, the impact of designers' cultural preferences is considered as incidental, or at least overlooked. A content analysis method was triangulated to collect and analyze diverse visual and textual data relating to the concept generation stage of the product development process. To collect data, professional industrial designers in the two culturally diverse countries of Australia and Iran were recruited to participate in half-hour design exercise sessions to sketch to a design brief, followed by responding to an interview questionnaire. The analysis of data revealed that: (1) designers' cultural preferences do influence their approaches toward tackling the design problem; (2) there are nexuses between the design aspects of the concepts generated and the cultural dimensions of the values of the societies in which the designers were born and has lived, and; (3)potential users can unconsciously comprehend the meaning invested in the product by the designer. This thesis breaks new ground for further advancing the study of the Designer-Precedent Approach (DPA) in other cultural and social contexts, while it challenges the conventional approaches of user-centered design (UCD) broadlyperceived as the ultimate method of incorporating users' wants into products.

Thesis (MPhil)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: This study is an exploration of Richard Florida’s Creative Class theory within an African city context. The economic value of the Creative Class is that their work revolves around innovation, a quality seen as essential to ‘new economy’ urban growth. Quality of place (that which makes ‘New York, New York’) is said to attract the Creative Class to certain cities, as lifestyle amenities are valued as much as employment opportunities. Nairobi is an example of an African city currently attracting both Kenyan and expatriate Creative Class workers, particularly in the information and communication technology (ICT) sector. The research aimed to understand why this group chose to live in Nairobi and to describe Nairobi’s quality of place, with a particular focus on infrastructure disruption. Overall, the Western city is the reference point for Creative Class literature and quality of place is embedded within a framework of urbanisation through industrialisation - a period known as the first urbanisation wave. The fastest growing cities on the African continent (Nairobi included) are part of the second urbanisation wave, an urbanisation process spurred by a set of vastly different dynamics in which industrialisation is virtually inconsequential. Urbanisation through industrialisation induced concomitant investments into infrastructure and thus it is unsurprising that the Creative Class literature assumes that urban infrastructure is ‘always on’ – available at all times as an inherent attribute of place. The point of the study was not to draw modernist comparisons, but rather to emphasise that notions of quality of place are incomplete given the rise of technological innovation in urban Africa, where cities often suffer from disruption of basic infrastructure. Until more recently, African cities did not feature in the Creative Class literature; the predominantly rural focus of ICT diffusion in the literature is a contributing factor to the lack of information on the Creative Class in African cities. The case study revealed that Nairobi’s quality of place is fundamentally different to normative prescriptions given to urban planners and, in some instances, is highly frustrating and unattractive. Contrary to Florida’s theory, those interviewed were not leaving Nairobi in search of cities with higher quality of place attributes or better infrastructure provision – individuals were rooted to the city because of their work and the professional networks with which they were associated. / AFRIKAANSE OPSOMMING: Hierdie studie is ‘n verkenning van Richard Florida se teorie van Kreatiewe Klas binne die konteks van ‘n Afrika-stad. Die ekonomiese waarde van die Kreatiewe Klas is dat hul werk rondom innovasie draai, wat as noodsaaklik beskou word vir die stedelike groei van die “nuwe ekonomie”. Plekkwaliteit (dit wat ‘New York, New York’ maak) lok luidens Florida se teorie die Kreatiewe Klas na sekere stede, aangesien hulle leefstylgeriewe net so hoog soos werksgeleenthede op die prys stel. Nairobi is ‘n voorbeeld van ‘n Afrika-stad wat tans beide Keniaanse en buitelandse werkers van die Kreatiewe Klas lok, veral na die plaaslike Informasie- en Kommunikasietegnologiesektor (IKT-sektor). Die navorsing het gepoog om te verstaan waarom hierdie groep gekies het om in Nairobi te woon asook om Nairobi se plekkwaliteit te beskryf, met ‘n spesifieke klem op die onderbreking van infrastruktuur. Oor die algemeen is die Westerse stad die vertrekpunt vir literatuur oor die Kreatiewe Klas. Daarby word plekkwaliteit gewoonlik beskou binne die raamwerk van “verstedeliking deur industrialisering”, wat bekend staan as die eerste verstedelikingsgolf. Die vinnig groeiendste stede op die Afrika-vasteland (insluitend Nairobi) is deel van ‘n tweede verstedelikingsgolf wat deur gans ander dinamika gedryf word, waarvan industrialisering ‘n feitlik weglaatbare faset is. Verstedeliking deur industrialisering het tot gelyktydige beleggings in infrastruktuur aanleiding gegee, dus maak dit sin dat literatuur oor die Kreatiewe Klas aanvaar dat stedelike infrastruktuur “altyd aan” is – dit wil sê, immerbeskikbaar as ‘n onafskeidelike kenmerk van die plek. Die doel van die studie was nie om modernistiese vergelykings te tref nie, maar om te beklemtoon dat begrippe van plekkwaliteit onvolledig is gegewe die opkoms van tegnologiese innovasie in stedelike Afrika, waar stede dikwels ly aan onderbrekings van basiese infrastruktuur. Tot baie onlangs is Afrika-stede nie genoem in literatuur oor die Kreatiewe Klas nie; die oorwegend landelike fokus van die verspreiding van IKT dra ook by tot die gebrek aan inligting aangaande die Kreatiewe Klas in Afrikastede. Die gevallestudie het onthul dat Nairobi se plekkwaliteit in wese anders is as die normatiewe voorskrifte wat aan stadsbeplanners voorgehou word en dat dit selfs, in sommige gevalle, uiters frustrerend en onaantreklik is. In teenstelling met Florida se teorie was diegene met wie onderhoude gevoer is, nie van plan om Nairobi te verlaat op soek na stede met hoër plekkwaliteitkenmerke of beter infrastruktuur nie – dié individue was gevestig in die stad weens hul werk en die professionele netwerke waarmee hul geskakel het.