Thesis (Ph.D.)--University of Rhode Island, 2007. / Includes bibliographical references (leaves 233-245).

No description available.

Thesis (Ph. D.)--University of Chicago, Dept. of the Geophysical Sciences, June 2003. / Includes bibliographical references. Also available on the Internet.

PhD (Geology) / Department of Mining and Environmental Geology / Cretaceous-Tertiary Periods marked the break-up of Gondwana, a large landmass composed of most of the present-day southern continents. In understanding the events of the supercontinental break-up, paleoenvironmental studies need to be carried out. In such studies, kaolinites could be used as paleoenvironmental proxies due to their small particle sizes and large surface area. It is in this context that this research sought to reconstruct the paleoenvironments in which selected Cretaceous-Tertiary kaolin deposits in the Douala Sub-Basin in Cameroon formed. To achieve this objective, mineralogical and geochemical characterisations were carried out using x-ray diffractometry, scanning electron microscopy, Fourier transform infrared spectrometry, thermal analyses and x-ray fluorescence spectroscopy. Trace elements and stable isotopes were analysed using mass spectrometries. Ages of zircons in the kaolins were determined using laser ablation magnetic sector-field inductively coupled plasma mass spectrometry (LA-SF-ICP-MS) U-Pb geochronology. Diagnostic evaluation for industrial applications of the kaolins were carried out using particle size distribution, texture, moisture content, pH, and electric conductivity. Six kaolin deposits from Cretaceous-tertiary Formations of the Douala Sub-Basin were studied; namely, Bomkoul (Tertiary), Dibamba (Tertiary), Ediki (Cretaceous), Logbaba (Cretaceous), Missole (Tertiary) and Yatchika (Cretaceous). The nature and occurrences of these kaolin deposits in Cameroon were determined through thorough mineralogical and geochemical characterisations of bulk (< 2 mm size fraction), silt (2-63 μm size fraction) and clay samples (< 2 μm size fraction). By quantifying the mineral phases present, the morphology and the functional groups in the kaolins are presented as the mineralogical characteristics of kaolins of each study site; whereas, the major oxides geochemistry and the micro-elemental composition constitute the geochemical characteristics of these kaolins. The minerals’ geneses were also determined and the prevailing paleoenvironmental and paleoclimatic conditions in which they were formed were reconstructed using trace elements and stable isotopes of oxygen and hydrogen in kaolinite. The maximum age of the kaolins were determined using U-Pb LA-SFICP-MS dating of zircons in the kaolin deposits. Diagnostic evaluation of the kaolins was carried out, and involved the determination of physical characteristics (particle size, texture, colour and moisture content) and physico-chemical characteristics (pH and electrical conductivity). Results showed that kaolinite and quartz (as major phases), smectite and/or illite (as minor phases), anatase and rutile (as minor or trace phases), goethite and hematite (as trace viii phases) were the mineral phases present in bulk and silt samples. Whereas, in the < 2 μm fractions, the mineral phases are made up of kaolinite and smectite (as major phases), smectite and/or illite (as minor phases), anatase and rutile (as minor or trace phases), goethite and hematite (as trace phases). The kaolins are mostly made up of thin platy or pseudo-hexagonal particles or flakes, books or stacks of kaolinite. The Dibamba, Logbaba and Missole II kaolins have well-ordered structures. Exothermic peak temperatures were generally between 943-988oC. The most abundant major oxides are silica and alumina, followed by iron oxide and titania; though Logbaba and Missole II had higher titania than iron oxide. 85% of the kaolins, portrayed extreme silicate weathering (chemical index of alteration > 80%) and are compositionally mature (index of compositional variability > 0.78). The geochemical composition of the kaolins showed that source rocks of these kaolins vary between rhyolite/granite and rhyolite/granite + basalt. The geochemistry also suggested that the kaolins formed in a marine environment (except Logbaba samples). Trace elements results revealed that Cretaceous-Tertiary kaolins in the Douala Sub-Basin are mainly enriched in rare earth elements compared to the upper continental crust, and have negative Eu anomaly. Large ion lithophiles (mainly Rb and U) were highly enriched in samples, high field strength elements (Y and Nb) were enriched in studied samples of all fractions; and transition trace elements generally had concentrations quite similar to upper continental crust values. Stable isotopes showed that the kaolins were formed in a supergene environment; and temperatures of kaolinitisation (assuming equilibrium with the global meteoric water line) were 26.58oC ± 9.65oC for Cretaceous kaolins and 29.40oC ± 7.22oC for Tertiary kaolins. Assuming equilibrium with the local (Douala) meteoric water line, the temperatures of kaolinitisation were 24.64oC ± 9.48oC for Cretaceous and 27.42oC ± 7.08oC for Tertiary kaolins. Four main zircon populations were identified from radiogenic dating: the 1st between 550 and 650 Ma, the 2nd between 950 and 1050 Ma, the 3rd around 1600 Ma and the 4th between 2800-3200 Ma. These four zircon populations belong to the Proterozoic (Neo-, Meso- and Paleoproterozoic) and the Archean. The maximum depositional ages of the kaolins, reflected by the youngest weighted averages of zircon populations varied between 588 ± 2 Ma and 612 ± 2 Ma, all belonging to the Ediacaran Period (Neoproterozoic). The diagnostic evaluation of the kaolins revealed that the kaolins are very sandy, with 50% of the samples having a sandy loamy clay or sandy loam texture. The colour of the samples varied considerably from white to darker colours (dark grey); with 15% of the kaolins being light reddish brown. The moisture content was generally very low (< 2 wt %) in all size fractions, except in Yatchika samples (moisture content > 2 wt %). The kaolins are generally acidic, with ix a pH(KCl) varying between 3.06 and 3.81, except in Missole I samples, which had a pH (KCl) < 2. The electrical conductivity (EC) generally varied between 20 to ~ 50 μS/cm, except Dibamba and MSL II 01 samples which had EC values in the interval 50 μS/cm < EC < 80 μS/cm; and Missole I samples having an EC > 7500 μS/cm. In conclusion, no great distinction was found between Cretaceous and Tertiary kaolins of the Douala Sub-Basin based on their mineralogy and geochemistry. The best kaolins in terms of these characteristics, and in comparison with the Georgia Kaolins (known for their high kaolinite quality), were the Dibamba (Tertiary), Logbaba (Cretaceous) and Missole II (Tertiary) kaolins. Based on their compositional maturity and mineralogical characteristics, these three kaolins are considered to be second cycle sediments; unlike Bomkoul, Yatchika and Ediki kaolins, which are believed to be first cycle sediments. Based on the trace elements and stable isotopes composition, Cretaceous and Tertiary kaolins of the Douala Sub-Basin were derived from felsic rocks. However, Cretaceous kaolins were formed in a cooler anoxic reducing environment; whereas the Tertiary kaolins were formed in a warmer oxidising environment, with higher precipitation. Ages of zircons in Cretaceous-Tertiary kaolins suggested that the zircon formed during two main tectonic events: the Eburnean orogeny, during which older zircons crystallised and the Pan-African orogeny, during which younger zircons crystallised. The maximum depositional ages of the kaolins varied between 588 ± 2 Ma and 612 ± 2 Ma. The main identified sources of these zircons are the Archean Ntem Complex, the Paleoproterozoic Nyong Group and the Neoproterozoic Yaounde Group. The diagnostic evaluation indicated that the particle size greatly influences the mineralogy and geochemistry of the kaolins because the finer particles (< 2 μm) have higher amounts of kaolinite and Al2O3. The moisture content of the kaolins makes them suitable as paint fillers and in soap production. Paper coating, paper filler, ceramics, pharmaceutics and cosmetics are potential applications for the kaolins, though particle size reduction and beneficiation will give them a higher quality. However, because these kaolin deposits are not big and extensive, they cannot be recommended for large scale industrial applications; but they can be used for bricks, pottery and stoneware manufacturing.

Southern Alabama holds one of the world's most complete shallow shelf Cretaceous-Tertiary boundary sections. The boundary is exposed in a sequence of marl-limestone interbeds in a roadcut south-east of Braggs in Lowndes County, Alabama. Benthic foraminifera were extracted in 10cm intervals to obtain a high-resolution record of assemblage succession across this controversial boundary. A local sea level curve was then formulated using previous paleobathymetric foraminiferal assemblage models from the Gulf Coast and the Atlantic Coastal margin. Sea-level fluctuations thus evident have revealed a fourth-order cycle similar to those found by Briskin and Fluegeman (1990) with an average period of around 430 kyr through the Paleocene. This cycle includes a drop from outer slope to middle shelf conditions in the latest Cretaceous and a subsequent increase from inner shelf to outer shelf conditions in the earliest Paleocene. Within this cycle are several fifth-order cycles that are interpreted as having a periodicity of roughly 100 kyr. Sea-level cycles with Milankovitch frequencies occurring on an ice-free Paleocene Earth lend support to the concept of astronomical forcing of climate and thus sea-level. / Department of Geology

Les bassins sédimentaires se développent souvent le long des zones internes d'anciennes chaînes orogéniques. Nous considérons dans ce projet la Péninsule Malaise (Marge Ouest de la Sonde) comme un haut crustal séparant deux régions de croûte continentale étirée ; les bassins d'Andaman/Malacca du côté occidental et les bassins thaïlandais/malais à l'est. Plusieurs stades de rifting ont été documentés grâce à une intense exploration géophysique régionale. Cependant, la corrélation entre les bassins riftés en mer et le noyau continental terrestre est mal connue. Dans ce mémoire, nous explorons par la cartographie, de missions de terrain et les données sismiques, comment ces structures réactivent des hétérogénéités mésozoïques crustales préexistantes. Le noyau continental semble être relativement peu déformé après l'orogénèse triasique Indosinienne. L’épais méga-horst crustal est bordé par des zones de cisaillement complexes (zones de failles de Ranong, Klong Marui et du Batholithe du Main Range) initiées au Crétacé Supérieur/Paléogène inférieur lors d’une déformation transpressive d’échelle crustale et plus tard réactivées à la fin du Paléogène. L'extension est localisée sur les bords de cette épine dorsale crustale le long d'une bande où la précédente déformation crétacée supérieure est bien exprimée. À l'ouest, le plateau continental est aminci en trois étapes principales qui correspondent à des blocs basculés d’échelle crustale bordés par de larges failles contre-régionales profondément enracinées (Bassin de Mergui). À l'est, des systèmes de rifts prononcés sont également présents, avec de grands blocs basculés (les bassins western Thai, de Songkhla et de Chumphon) qui pourraient représenter de grands boudins de croûte. Dans le domaine central, l'extension est limitée à de demi-grabens étroits isolés de direction N-S développés sur une croûte continentale épaisse, et contrôlés par failles normales pelliculaires, qui se développent souvent au contact entre les granitoïdes et l’encaissant. Les bords extérieurs des régions affectées par le boudinage crustal délimitent le bassin d'Andaman plus grand et profond à l'ouest et les bassins Malais et de Pattani à l'est. À une échelle régionale, les bassins riftés ressemblent à des structures en-échelon N-S le long de grandes bandes de cisaillement de NW-SE. Le rifting est accommodé par de larges failles normales à faible pendage (LANF : Low Angle Normal Faults) réactivant les morpho-structures de la croûte telles que de larges plis et batholithes mésozoïques. Les bassins profonds d'Andaman, Malais et de Pattani semblent situés sur une croûte à rhéologie plus faible qui pourrait être héritée des blocs continentaux dérivés du Gondwana (Birmanie, Sibumasu, et Indochine). L'ensemble des long bassins étroits au coeur de la région (bassins de Khien SA, de Krabi, et du Malacca) apparaissent avoir souffert de relativement peu d'extension. Ce travail montre que le cœur de l’orogène Crétacé supérieure est faiblement réactivé avec seulement quelques traces d’un étirement précoce par rapport aux bords qui sont sujets à un amincissement crustal en larges blocs basculés. A mesure que la déformation augmente, le rifting migre et se localise vers les zones externes et sa géométrie apparait plus « molle » suggérant un mécanisme influencé par la thermique. La coexistence de ces deux géométries au sein d’un même cycle de rifting fait de la marge Ouest de la sonde un cas d’étude édifiant. / Sedimentary basins often develop above internal zones of former orogenic belts. We hereafter consider the Malay Peninsula (Western Sunda) as a crustal high separating two regions of stretched continental crust; the Andaman/Malacca basins in the western side and the Thai/Malay basins in the east. Several stages of rifting have been documented thanks to extensive geophysical exploration. However, little is known on the correlation between offshore rifted basins and the onshore continental core. In this paper, we explore through mapping and seismic data, how these structures reactivate pre-existing Mesozoic basement heterogeneities. The continental core appears to be relatively undeformed after the Triassic Indosinian orogeny. The thick crustal mega-horst is bounded by complex shear zones (Ranong, Klong Marui and Main Range Batholith Fault Zones) inititiated during the Late Cretaceous/Early Paleogene during a thick-skin transpressional deformation and later reactivated in the Late Paleogene. The extension is localized on the sides of this crustal backbone along a strip where earlier Late Cretaceous deformation is well expressed. To the west, the continental shelf is underlain by three major crustal steps which correspond to wide crustal-scale tilted blocks bounded by deep rooted counter regional normal faults (Mergui Basin). To the east, some pronounced rift systems are also present, with large tilted blocks (Western Thai, Songkhla and Chumphon basins) which may reflect large crustal boudins. In the central domain, the extension is limited to isolated narrow N-S half grabens developed on a thick continental crust, controlled by shallow rooted normal faults, which develop often at the contact between granitoids and the host-rocks. The outer limits of the areas affected by the crustal boudinage mark the boundary toward the large and deeper Andaman basin in the west and the Malay and Pattani basins in the east. At a regional scale, the rifted basins resemble N-S en-echelon structures along large NW-SE shear bands. The rifting is accommodated by large low angle normal faults (LANF) running along crustal morphostructures such as broad folds and Mesozoic batholiths. The deep Andaman, Malay and Pattani basins seem to sit on weaker crust inherited from Gondwana-derived continental blocks (Burma, Sibumasu, and Indochina). The set of narrow elongated basins in the core of the Region (Khien Sa, Krabi, and Malacca basins) suffered from a relatively lesser extension. This work shows that the core of the late Cretaceous Orogeny is weakly reactivated during the subsequent rifting with only few evidences of stretching whereas its sides are thinned with large tilted blocks. The rifting migrates and localizes on the external regions and its geometry appears more ductile suggesting the influence of a thermal activity in the process. The coexistence of both geometries in a single rifting cycle makes the western margin of Sundaland an enlightening example.

PhDENV (Geology) / Department of Mining and Environmental Geology / The Cretaceous period marked the breaking up of Gondwana, giving rise to the separation of the African and South American continents with the subsequent emergence of the South Atlantic Ocean. Most correlation studies between the two continents with respect to paleoenvironmental conditions and tectonic settings during the Cretaceous- Tertiary periods have been concentrated more on the use of flora and fauna as indicators with less application of kaolinite as paleoenviromental proxies, hence, this study. The research involved the evaluation of paleoenvironmental conditions and tectonic settings of four (4) selected Cretaceous-Tertiary kaolin deposits with two (2) each from the Eastern Dahomey (Eruku and Lakiri) and Niger Delta (Awo-Omama and Ubulu-Uku) Basins in Nigeria. Representative kaolin samples collected from the selected deposits were analysed for physico-chemical, mineralogical, geochemical, isotopic, and geochronological data. The geochemical data obtained by x-ray fluorescence (XRF) spectroscopy and laser ablation inductively coupled plasma mass spectrometry (LAICPMS) were used in unraveling the provenance and tectonic settings of the kaolins. The kaolinite stable isotopic data for oxygen and hydrogen determined using a Finnigan Delta XP Mass Spectrometer were used to assess the paleoenvironmental and paleoclimatic conditions under which the kaolins were formed. The detrital zircon geochronological data acquired by laser ablation – single collector – magnetic sectorfield – inductively coupled plasma – mass spectrometry (LA-SFICP-MS) as well as kaolinite stable isotopic data were employed in constraining the probable timing of kaolinisation. The industrial applications of the kaolins were assessed based on the physico-chemical (Colour, particle size distribution (PSD), pH, electrical conductivity, and Atterberg limits), mineralogical, and geochemical data. The mineralogical data were obtained through x-ray diffractometry (XRD), Fourier transform infrared (FTIR) spectroscopy, Thermogravimetric analysis and differential scanning calorimetry, and scanning electron microscopy (SEM). Correlative studies between selected Cretaceous African and South American kaolins were conducted. The results showed that the dominant colour in the studied kaolins was pale red (39 %) followed by pinkish and light grey (35 %) as well as reddish yellow, light pink, light brown, vii reddish brown, and pinkish white. The pH and EC values generally ranged from 4.27 to 5.29 and 0.2 to 13.1 μS/cm, respectively. The kaolins predominantly have clay to sandy clay textures with plasticity indices between 10 and 22 wt %. Bulk mineralogical quantitative results indicated that the Cretaceous kaolins have kaolinite, quartz, and muscovite present in that decreasing order with anatase, goethite, and hematite in traces whereas Tertiary kaolins have kaolinite and quartz present in that decreasing order with anatase and goethite in traces. In the silt fractions, kaolinite and quartz were the dominant mineral constituents, whereas in the clay fractions, the dominant clay mineral was kaolinite accounting for 69 to 99 wt % with the non-clay minerals like quartz, anatase, hematite and goethite accounting for percentages between 1 to 28 wt % in the Cretaceous – Tertiary kaolins. Morphologically, the studied kaolins were characterised by pseudohexagonal stacks to books and thin platy kaolinite particles with moderate structural order. The chemical compositions of the Cretaceous-Tertiary kaolin deposits were identical to hydrated alumino-silicates based on the dominance of SiO2, Al2O3 and LOI. The chemical index of alteration (CIA) and chemical index of weathering (CIW) values varied between 96.98 to 99.39 % and 98.95 to 99.89 %, respectively. The clay fractions were enriched in Cr, Nb, Sc, Th, U, V, Zr, and LREE and depleted in Ba, Co, Rb, Sr, and HREE, respectively, relative to the average Upper Continental Crust (UCC). The Th/Sc, La/Sc, Th/Cr, and Eu/Eu* ratios were within the range of sediments derived from felsic rocks. The TiO2 versus Al2O3 and La-Th-Sc plots indicated source rocks with granitic – granodioritic - gabbroic compositions. Geochemical discrimination plots showed that the Cretaceous and Tertiary kaolins were deposited in passive margin tectonic settings. The stable isotopic results indicated that the values of the Cretaceous kaolins ranged from – 47 to – 57 ‰ and 19.1 to 19.8 ‰, respectively, with paleotemperatures between 29.0 and 32.2 ˚C, whereas the δD and δ18O corresponding values for the Tertiary kaolins ranged from – 54 to – 66 ‰ and 20 to 21.5 ‰, respectively, with paleotemperatures between 17.0 and 23.9 ˚C. viii The U-Pb dating of the detrital zircons showed that the Cretaceous - Tertiary kaolins have inputs from rocks of Eburnean (2500 – 2000 Ma) and Pan African (750 – 450 Ma) ages. The age of maximum deposition determined from the least to statistically robust approach corresponds to the Ediacaran Period (645 – 541 Ma) of the Neoproterozoic Era (1000 – 541 Ma). The Cretaceous – Tertiary kaolins were formed under intense anoxic chemical paleoweathering conditions of predominantly felsic rocks in addition to contributions from intermediate and mafic rocks in passive margin tectonic settings. The Cretaceous kaolins were formed under warmer conditions relative to the Tertiary kaolins. The West African Massif rocks were the main sediment sources for the Cretaceous kaolins, whereas both the West African and Northern Nigerian Massif rocks were the major sediment sources for the Tertiary kaolins. The most probable timing of kaolinisation for the Cretaceous – Tertiary kaolins occurred between the Ediacaran (645 – 541 Ma) and Early Cretaceous Periods for the Cretaceous kaolins and between the Ediacaran Period (645 – 541 Ma) and Oligo – Miocene age for the Tertiary kaolins. The Nigerian and Brazilian Cretaceous kaolins formed under similar warm tropical paleoclimate. The study corroborated the occurrence of the Eburnean (Transamazonian) and Pan African (Brasiliano) orogenic events across the African and South American continents. Beneficiation of the Cretaceous – Tertiary kaolins will allow large scale industrial applications in paper coating, ceramics, pharmaceutical, and cosmetics industries. The major contributions from this study have been: the better understanding of the past environmental conditions and tectonic settings, the dating of the possible timing of kaolinisation, and improvement on the potential industrial applications of the Cretaceous – Tertiary kaolins. / NRF