Crushed or recycled concrete aggregates (CCA/RCA) is an increasingly popular material as a replacement for natural aggregates in concrete due to industry demands for more recycled, lower carbon and responsibly sourced materials. In the UK, the majority of CCA is utilised in non-structural applications such as: a general fill material, road base/subbase or in low-grade concrete. Recycled aggregate producers however, are seeking new ways to incorporate CCA into higher value applications such as structural concrete to increase profits. Opportunities to incorporate CCA into structural concrete may also arise because of project demands for sustainability or in situations where natural aggregates are in short supply. Limited research has been published regarding the effect of coarse CCA on the durability of structural concrete, particularly in respect to water and chloride ion ingress and possibility of corrosion initiation. The aim of this EngD research programme was to investigate the effect of coarse CCA and supplementary cementitious materials (SCMs) on the durability performance of structural concrete, with particular emphasis on the key liquid transport mechanisms within concrete, namely absorption by capillary action, diffusion and migration. This addressed an industry concern regarding the detrimental effect of coarse CCA which has resulted in a limit on replacement levels of coarse natural aggregates in structural concrete, as defined in Eurocodes and local national standards for concrete. In this study, structural concrete was produced with varying levels of coarse CCA replacement (up to 100%), from five different sources and/or structural elements across the UK, with various combinations of SCMs to replace in part the Portland cement. Petrographic analysis was used as an innovative technique to characterise the coarse CCA sources to determine suitability which yielded positive results. The durability performance of the resultant concrete was analysed by exposing the concrete to aggressive chloride environments. The results indicate that the inclusion of coarse CCA, even as low as 20%, had a detrimental effect on the durability performance of structural concrete, in relation to absorption by capillary action, diffusion and migration. This effect however, can be offset through the use of SCMs, which have been shown to outperform control Portland cement concrete with 100% natural aggregates in durability performance tests. The results also suggest that cementitious materials had a greater influence on durability performance than the type and source of coarse aggregates used. It is recommended that the replacement of natural aggregate with coarse CCA be limited to 30% in cases where compliance with the 28 day characteristic strength is of particular importance. If the criterion for compliance at 28 days can be relaxed and the compressive cube strength of concretes with SCMs tested at later ages for conformity (56 or 90 days), then higher quantities of coarse CCA may be incorporated up to 60% to produce a more sustainable structural concrete. It is recommended that Portland cement is partially replaced with 50% ground granulated blast-furnace slag (GGBS) to produce a CEM III/A concrete. This is a significant step towards the potential wider implementation of coarse CCA in structural concrete, provided a suitable quantity of SCM is adopted along with a reliable and consistent source of coarse CCA.

Constitués de plusieurs composants (granulats naturels et pâte de ciment adhérente), les GBR ne sont à l’heure actuelle pas utilisés largement dans la formulation de nouveaux bétons. Les propriétés médiocres des GBR compliquent considérablement la détermination de la quantité d’eau efficace dans le béton frais. Tout d’abord, une étude bibliographique va mettre en évidence la grande dispersion des résultats des essais de caractérisation des GBR et des propriétés des bétons recyclés à l’état frais et durci. Ensuite, une étude vise à analyser l’hétérogénéité des GBR et des granulats de béton concassé (GBC) par rapport à différents paramètres : aux impuretés granulaires, à la densité et à la teneur en pâte de ciment, au malaxage du béton parent, et au niveau de la capacité d’absorption d’eau des GBC en fonction de leur état de pré-humidification. Enfin, une dernière partie est destinée à améliorer la maîtrise de l’eau efficace réelle dans la fabrication du béton recyclé. La cinétique d’absorption des GBC dans une pâte de ciment est tout d’abord étudiée. Ensuite, l’évolution de l’eau efficace durant le malaxage de bétons à base de GBC est investiguée au moyen d’une méthode originale basée sur le suivi des courbes de puissance du malaxeur. Finalement, l’effet d’un malaxage sous vide relatif sur les propriétés des bétons à base de granulats naturels et des bétons à base de GBC est étudié. / Composed of several components (natural aggregates and adherent cement paste), RCA are not widely recommended in new concrete formulations. Their poor properties considerably complicate the determination of the effective water in fresh concrete. In a first part, a bibliographic study will highlight the wide dispersion of the results of characterization tests of RCA and the properties of fresh and hardened recycled concrete. In a second part, the heterogeneity of RCA and crushed concrete aggregates (CCA) is studied according to different parameters: granular impurities, density, cement paste content, mixing of parent concrete, and water absorption capacity according to their pre-humidification. The third part consists of three experimental studies that intend to improve effective water control in the manufacture of recycled concrete. The absorption kinetics of CCA in a cement paste is first studied. Then, the evolution of effective water in fresh concrete during mixing is studied using an original method based on the power evolution of the mixer. Finally, the effect of vacuum mixing on the properties of ordinary and recycled concretes is investigated.