<p>Direct Digital Frequency Synthesi<em>s </em>(DDFS) is a method of producing an analog waveform by</p><p>generating a time-varying signal in digital form, succeeded by digital-to-analog reconstruction.</p><p>At behavioral level the bit products with specified weights are used to generate the sine wave. In representation of a sine wave both positive and negative weights are generated. Since negative weights are not desired in design, the negative weights are transformed to positive weights. To reduce the number of current sources and control signals, bit product signals of those current sources which cannot be switched on simultaneously and have equal weights are shared. After sharing weights, the control signals are reduced to from 59 to 43 and current sources from 207 to 145.</p><p>Different control words are used by the DDFS system in order to generate different frequencies. The control word is successively added to the previous value in a 20-bit accumulator. Nine most significant bits out of these twenty bits are used for the DAC.</p><p>Since the Current Steering DAC architecture is suitable for high speed and high resolution purposes, so a 9-bit nonlinear current steering DAC is used to convert the output of bit products to the analog sine wave. Seven bits are used to generate one quarter of the sine wave. Eighth and ninth bits are used to generate the full sine wave.</p><p>HCMOS 9 (130 nm) ST Microelectronics process is used by employing high speed NMOS and PMOS transistors. The bit products (control signals) are computed by using complementary static CMOS logic which then act as control signals for the current sources after passing through D-flip flops. Practical design issues of current sources and parts of digital logic were studied and implemented using the Cadence full-custom design environment.</p>

Direct Digital Frequency Synthesis (DDFS) is a method of producing an analog waveform by generating a time-varying signal in digital form, succeeded by digital-to-analog reconstruction. At behavioral level the bit products with specified weights are used to generate the sine wave. In representation of a sine wave both positive and negative weights are generated. Since negative weights are not desired in design, the negative weights are transformed to positive weights. To reduce the number of current sources and control signals, bit product signals of those current sources which cannot be switched on simultaneously and have equal weights are shared. After sharing weights, the control signals are reduced to from 59 to 43 and current sources from 207 to 145. Different control words are used by the DDFS system in order to generate different frequencies. The control word is successively added to the previous value in a 20-bit accumulator. Nine most significant bits out of these twenty bits are used for the DAC. Since the Current Steering DAC architecture is suitable for high speed and high resolution purposes, so a 9-bit nonlinear current steering DAC is used to convert the output of bit products to the analog sine wave. Seven bits are used to generate one quarter of the sine wave. Eighth and ninth bits are used to generate the full sine wave. HCMOS 9 (130 nm) ST Microelectronics process is used by employing high speed NMOS and PMOS transistors. The bit products (control signals) are computed by using complementary static CMOS logic which then act as control signals for the current sources after passing through D-flip flops. Practical design issues of current sources and parts of digital logic were studied and implemented using the Cadence full-custom design environment.

abstract: High speed current-steering DACs with high linearity are needed in today's applications such as wired and wireless communications, instrumentation, radar, and other direct digital synthesis (DDS) applications. However, a trade-off exists between the speed and resolution of Nyquist rate current-steering DACs. As the resolution increases, more transistor area is required to meet matching requirements for optimal linearity and thus, the overall speed of the DAC is limited. In this thesis work, a 12-bit current-steering DAC was designed with current sources scaled below the required matching size to decrease the area and increase the overall speed of the DAC. By scaling the current sources, however, errors due to random mismatch between current sources will arise and additional calibration hardware is necessary to ensure 12-bit linearity. This work presents how to implement a self-calibration DAC that works to fix amplitude errors while maintaining a lower overall area. Additionally, the DAC designed in this thesis investigates the implementation feasibility of a data-interleaved architecture. Data interleaving can increase the total bandwidth of the DACs by 2 with an increase in SQNR by an additional 3 dB. The final results show that the calibration method can effectively improve the linearity of the DAC. The DAC is able to run up to 400 MSPS frequencies with a 75 dB SFDR performance and above 87 dB SFDR performance at update rates of 200 MSPS. / Dissertation/Thesis / Masters Thesis Electrical Engineering 2014