The aim of the project is a new building of a sport and wellness center in the cadastral area Brno-Židenice, South Moravian Region. Sport and wellness center is designed as a detached building with two floors and basement with a flat single skin vegetation roof. In the 1st floor there is a reception, cafe, children's play area, central changing rooms and a technical facilities. In the 2nd floor is a fitness center, solarium, massage rooms and sports nutrition and diagnostics. In the basement is a wellness center, facilities for employees and lasergame arena. The main structural system of the building consists of reinforced concrete columns and reinforced concrete slabs. The facade is designed as a contact thermal insulation system and glazed curtain wall.

The aim of this diploma thesis is to create a detailed design of a public library with cafeteria. The building is situated in the developing city area of Jihlava in the cadastral area of Horní Kosov. It has four storeys above ground and no basement floor. The 4th floor has a smaller net floor area than the rest floors. The building is designed also for disabled people. The expected number of employees is 18 and the number of visitors is 150 in a daily average. An entrance to the property is on the Vrchlického street. There is a parking lot in front of the building with a total capacity of 50 parking spaces including three parking spaces for disabled. The cafeteria and its facilities are situated in the ground floor of the building. Browsing area is situated in the second and third floor. The type of the structure is a frame structure with infill walls made of aerated concrete. The building has a double-skin facade. The cladding of the facade is made of fibre-cement boards. There is a curtain wall designed at some sections of the facade. The building has a warm flat roof with a parapet wall and interior roof drains.

The dissertation deals with construction-technlogical project of Letmo commercial centre in Brno.The building is situated in the city centre. The main task of this thesis was to suggest and solve the question of the constructrion site equipment. That is applied in each construction phase – ground works, recontruction of the steel load-carrying arrangement, reconstruction of pipelines, roof and the ventilated facade. The ventilated facade is very specific in case of this building as that is aired out using air-conditioning system. Moreover, the thesis goes in for works timeline of the shopping centre Letmo, budget according to THU, technological code for ventilated fasade and inspecting and testing schedule.

The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.

The diploma thesis solves a theater with a cafe in the town of Humpolec in the Vysočina Region. It contains complete documentation for execution, assessment in terms of fire safety and in terms of building physics. Furthermore, the proposal ventilation for cinema, foyer and cafe. There is a cinema and a cafe, which is located on the second floor. Cinema is designed with a capacity of 196 seats, of which 5 seats are reserved for people with limited mobility. Screening is provided as 2D mode and 3D projection. The café is designed for moviegoers and the general public. The café seats 36 seats. The building is designed as a two storey with dissected floor plan with rounded shapes with no sharp edges with a protruding portion of the roof of cinema, which is located on the north side of the building and has the function division of the building into individual units. The building has dimensions of 39.15 meters x 29.45 meters. The supporting structure of the building consists of reinforced concrete reinforced walls and ceilings. In the southern part of the building with rooms Foyer café is designed glass facade of the LOP. Supporting roof structure over the cinema hall is made up of wooden trusses joined punched punched plates.

The subject of the diploma thesis is a project documentation of a multifunctional building within the scope of the implementing documentation. The main goal of the thesis is the design of the layout, construction and material solution, completed by design of the fire safety solutions and assessment in terms of building physics. The multifunctional building has one underground floor and nine above-ground floors. In the basement there are technical facilities of the building and a parking area, in the 1st floor there are business premises, in one part of the 2nd floor there is a gym and the remaining areas are used for administrative purposes as well as the entire 3rd to 9th floor. The construction system is designed as a reinforced concrete monolithic skeleton, completed by a reinforced concrete core. Ceiling structures are monolithic reinforced concrete locally supported slabs. The building is founded on the concrete slab placed on drilled shafts. The main element of the outer wall is curtain walling, which is made from a mullion-transom system.

The content of this thesis is elaboration of technical documentation for realization of a sports centre. The building is situated in Hodonín in flattened terrain. It is a building with two floors, non-cellar, flat vegetation roof and sloping roof of the wooden glued laminated trusses. The building is based on plain concrete strip foundations and concrete foundations footing. Both peripheral and internal walls are made of ceramic blocks Porotherm. In open spaces, reinforced concrete columns are designed. The ceiling structure is designed from pre-stressed Spiroll ceiling panels. The peripheral walls are insulated with the ETICS external thermal insulation system in the western part of the building. On the rest of the building there is a ventilated facade with a cladding made of wood and Cetris tiles. The building is functionally divided into two parts with a common entrance. On the north and south side there are sports grounds. The rest consists of a restaurant, a kitchen with facilities, a hygienic background for employees and visitors. The whole building is barrier-free.

The topic of this diploma thesis is heating of apartment buildings, where an attention was focused on thermal comfort in heated rooms. The first theoretical part brings results of CFD simulations which compare radiators with floor heating. The second part consits of practical application o the given building. There are two options in this project - heating by radiators or floor heating. The third part describes two experiments - measurement of indoor environment in two rooms and measurement of gas consumption in apartment buildings with different heating concepts. In the last part the mean radiant temperature is simulated. There are compared different kind of heating, which have impact to distribution of mean radiant temperature in the room. The personal software was created for deeper understanding of mean radiant temperature.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.

In my thesis I will deal with the draft project documentation for sport hotel. This object is located in the quiet southeastern part of Frydlant with city views and easy access to the nearby sports facilities. It is an object of part two storey and a basement. The building is set into the sloping terrain, so the underground floor extends on to the ground. The building is based on foundation walls and footings that are made of reinforced concrete. Load-bearing walls of the underground floors are designed as reinforced concrete. Ceiling structure of the building is made as reinforced concrete beam ceiling and in other structure parts as a crosswise reinforced concrete plate. Perimeter bearing walls and two floors, are designed from the acoustic sand-lime bricks Silk. External walls are warmed by a contact insulation system. Flat single shell roof was chosen over part of the restaurant. Double-layer roof with a supporting truss structures above the main part of the building. The building is divided into functional parts. Accommodation capacities are mostly on the second floor. On the ground floor there is a restaurant with a kitchen and space for staff. In the basement there is a functional part of the wellness and gym with common dressing rooms. The only entrance path allows convenient control of customers. The building is wheelchair accessible.