Bio-inspired monomers functionalized with nucleobase or ionic group allowed synthesis of supramolecular polymers using free radical polymerization and controlled radical polymerization techniques. Comprehensive investigations for the structure-property-morphology relationships of these supramolecular polymers elucidated the effect of noncovalent interactions on polymer physical properties and self-assembly behaviors. Reverse addition-fragmentation chain transfer (RAFT) polymerization afforded acrylic ABC and ABA triblock copolymers with nucleobase-functionalized external blocks and a low-Tg central block. The hard-soft-hard triblock polymer architecture drove microphase-separation into a physically crosslinked hard phase in a low Tg matrix. Hydrogen bonding in the hard phase enhanced the mechanical strength and maintained processability of microphase-separated copolymers for thermoplastics and elastomers. A thermodynamically favored one-to-one stoichiometry of adenine and thymine yielded the optimal thermomechanical performance. Intermolecular hydrogen bonding of two thymine units and one adenine unit allowed the formation of base triplets and directed self-assembly of ABC triblock copolymers into remarkably well-defined lamellae with long-range ordering. Acetyl protected cytosine and guanine-containing random copolymers exhibited tunable cohesive strength and peel strength as pressure sensitive adhesives. Post-functionalization converted unprotected cytosine pendent groups in acrylic random copolymers to ureido-cytosine units that formed quadruple self-hydrogen bonding. Ureido-cytosine containing random copolymers self-assembled into nano-fibrillar hard domains in a soft acrylic matrix, and exhibited enhanced cohesive strength, wide service temperature window, and low moisture uptake as soft adhesives. A library of styrenic DABCO salt-containing monomers allowed the synthesis of random ionomers with two quaternized nitrogen cations on each ionic pendant group. Thermomechanical, morphological, and rheological analyses revealed that doubly-charged DABCO salts formed stronger ionic association and promoted more well-defined microphase-separation compared to singly-charged analogs with the same charge density. Bulkier counterions led to enhanced thermal stability, increased phase-mixing, and reduced water uptake for DABCO salt-containing copolymers, while alkyl substituent lengths only significantly affected water uptake of DABCO salt-containing copolymers. Step growth polymerization of plant oil-based AB monomer and diamines enabled the synthesis of unprecedented isocyanate-free poly(amide hydroxyurethane)s, the first examples of film-forming, linear isocyanate-free polyurethanes with mechanical integrity and processability. Successful electrospinning of segmented PAHUs afforded randomly orientated, semicrystalline fibers that formed stretchable, free-standing fiber mats with superior cell adhesion and biocompatibility. / Ph. D.

The dynamic characteristics of hydrogen and ionic bonding contributes to the reversible properties of acrylic polymers, opening new avenues for designing materials with mechanical strength and processability. These non-covalent interactions function as physical crosslinks, which provide enhanced structural and mechanical integrity to acrylic block copolymers. The strong hydrogen bonding or ionic interaction also directs self-assembly to hierarchical microstructures, which enables many applications including thermoplastic elastomers and energy storage devices. Inspired by complementary hydrogen bonding interactions between nucleobase pairs in DNA, a series of bioinspired nucleobase-acrylate monomers such as adenine acrylate (AdA), thymine acrylate (ThA), cytosine acrylate (CyA) were designed, whose synthesis were afforded by aza-Michael addition. Among those nucleobases, cytosine arises as a unique category. It is not only able to self-associate via weak hydrogen bonds, but also forms quadruple hydrogen-bond bearing units (ureido-cytosine) when functionalized with isocyanates. Reversible addition-fragmentation chain transfer polymerization (RAFT) yielded acrylic ABA triblock copolymers with CyA external hard blocks. A subsequent post-functionalization using hexyl-isocyanate generated the corresponding ureido-cytosine acrylate(UCyA)-containing triblock copolymers. The self-complementary quadruple hydrogen bonding in the UCyA polymers achieved a broader service temperature window, while the alkyl chain ends of UCyA units allowed tunability of the mechanical strength to apply as thermoplastic elastomers. In addition, quadruple hydrogen bonding induced stronger propensity of self-assembly and denser packing of the polymers, which contributed to a well-defined ordered morphology and enhanced resistance to moisture uptake. A facile 2-step synthesis provided doubly-charged styrenic DABCO salt monomer(VBDC₁₈BrCl) containing an octadecyl tail. RAFT polymerization allowed the preparation of DABCO ABA block copolymers with defined molecular weights and low polydispersity. Thermal analysis revealed a melting transition of the VBDC₁₈BrCl block copolymer resulting from the side-chain crystallization of the long alkyl tail. Systematic mechanical comparisons between DABCO salt-containing copolymers and the corresponding singly-charged polymer controls demonstrated superior mechanical properties attributable to a stronger ionic interaction between the doubly-charged groups. Morphological characterizations revealed a well-ordered lamellar microstructure and a unique three-phase morphology of the DABCO block copolymers, which involve a soft phase, a hard phase, and an ionic aggregates domain dispersed within the hard domain. / Master of Science

Supramolecular polymers represent a family of polymeric materials that are held together with dynamic, noncovalent interactions. In contrast to conventional functional polymers that usually have high melt-viscosity due to their covalent nature and chain entanglement, supramolecular polymers combine excellent physical properties with low melt-viscosity, allowing for less energy-intensive processability and recyclability. Dynamic bonding with multiple binding sites, such as multiple hydrogen bonding or multiple ionic bonding, exhibits much stronger binding strength compared to the counterparts containing only a single binding site, thereby allowing for enhanced mechanical integrity to the polymers and facilitate self-assembly. This dissertation focuses on the design of novel supramolecular polymers building from the doubly-charged or quadruple hydrogen bonding (QHB) scaffolds utilizing chain-growth polymerization or step-growth polymerization, as well as elucidate the structure-property-morphology relationships of the polymers. A 2-step nucleophilic substitution reaction afforded a series of 1,4-diazabicyclo[2.2.2]octane (DABCO)-based styrenic monomers with two pairs of charged groups. An optimized 2-step reversible-addition-fragmentation chain-transfer (RAFT) polymerization synthesized ABA triblock thermoplastic elastomers (TPEs) with a low Tg poly (n-butyl acrylate) central block and a high Tg external charged blocks. Strong ionic interactions between doubly-charged units drove molecular self-assembly to form densely packed, hierarchical microstructures, which contributed to a robust, crosslinked physical network that allows the polymer to retain thermomechanical integrity until degradation. High-resolution single-crystal X-ray diffraction (SCXRD) coupled with powder X-ray diffraction (PXRD) further disclosed a detailed 3-D structural information of molecular arrangement and ion distribution within the charged phase through comparing DABCO-salt monomer single-crystal structure and the corresponding homopolymer XRD pattern. It was found that the physical properties of the DABCO-salt copolymers not only relied on their charge content and architectures but also dependent on their electrostatically-bonded counterions. The size and structure of the counterion determined the strength of dipole-dipole interaction, which significantly impact on thermal property, (thermo)mechanical performance, water affinity, and microstructure. A cytosine-functionalized monomer, cytosine acrylate (CyA), allowed the synthesis of acrylic ABA triblock TPEs with pendant nucleobase moieties in the external blocks and a low Tg central polymer matrix through RAFT polymerization. Post-functionalization of cytosine (Cyt) bidentate hydrogen bonding sites with alkyl isocyanate, allowed the formation of ureido-cytosine (UCyt) groups in the external block that were readily dimerized through QHB interactions. The UCyt units in the external block enhanced mechanical strength and induced stronger phase-separation of the block copolymers compared to the corresponding Cyt-containing TPE analogs. Facile conventional free-radical polymerization using CyA and subsequent post-functionalization enabled accessibility to random copolymers containing pendant UCyt QHB moieties in the soft polymer matrix. The synergy of the flexible polymer matrix and the dynamic character of QHB groups contributed to the ultra-high elasticity of the polymer and rapid self-healing properties. QHB interactions enabled efficient mechanical recovery upon deformation by facilitating elastic chain retraction to regenerate the original physical network. Finally, one-pot step-growth polymerization through chain extending a novel bis-Cyt monomer and a commercially available polyether diamine using a di-isocyanate extender afforded segmented polyurea series for extrusion additive manufacturing. The molecular design of the polyureas featured soft segments containing flexible polyether chain and a relatively weak urea hydrogen bonding sites in the soft segment and rigid UCyt hydrogen bonding groups in the hard segment. The reversible characteristics of QHB enabled low viscosity at the processing temperature while providing mechanical integrity after processing and reinforced bonding between the interlayers, which contributed to the remarkable strength, elasticity, toughness, and interlayer adhesion of the printed parts. / Doctor of Philosophy / This dissertation focuses on designing supramolecular thermoplastic elastomers containing strong noncovalent interactions, i.e., quadruple hydrogen bonds or double ionic bonds. Inspired from noncovalent interactions in our mother nature, a series of bio-inspired monomers functionalized with nucleobase or ionic units were synthesized through scalable reactions with minimal purification steps. Polymerization of the functional monomers through step-growth or chain-growth polymerization techniques affords a variety of supramolecular thermoplastic elastomers with well-defined structures and architectures. These thermoplastic elastomers comprise soft and hard constituents; the former contains low glass transition polymer chains that provide elasticity while the latter contains strong noncovalent units to impart mechanical strength. Varying the soft/hard component ratios enables polymers with tunable physical properties to address different needs. Systematic characterizations of these supramolecular polymers revealed their distinct properties from the polymers containing the covalent or weak noncovalent interactions and facilitate molecular-level understanding of the polymers. Generally, incorporating strong noncovalent interactions increases the temperature for polymer segmental motion and extends thermomechanical plateau windows. Additionally, the strong association strength of those non-covalent interactions promotes microphase separation and self-assembly, contributing to a high degree of structural ordering of the polymers. Moreover, the dynamic characteristics of the noncovalent interactions offer the polymers with reversible properties, which not only enables melt-processability and recyclability of the polymer but also contributes to a series of smart properties, including self-healing, shape-memory, and recoverability. Thus, the molecular design using supramolecular chemistry provides promising avenues to developing functional materials with enhanced mechanical properties, processability, and stimuli-responsiveness for emerging applications.