The objective of this semester thesis is design of the control algorithm, needed control and power circuits and PCB design for the unfinished bicycle concept with a combustion engine and electric power transmission. The control algorithm had to be designed to make efficient use of the combustion engine performance and to minimalize the fuel consumption and noise level of the device. All circuits are fully implemented by analog components for which were designed printed circuit boards using program Eagle and this boards were revived and debugged.

This master´s thesis describes switch mode power supply. The aim of this master´s thesis is the design and the construction of the switch mode power supply, which will be used as a laboratory tool.

The objective of this master's thesis is new power converter design for bicycle with combustion engine and electric power transmission. The power converter is control by microprocessor and control algorithm is designed to achieve maximum efficiently of combustion engine. Converter and servomotor for controlling combustion engine throttle are located in metal box. Hardware, firmware and metal box are designed in the thesis.

This thesis deals with design of a DC/DC converter for powering the oscilloscope. The main parameters for selecting a suitable inverter are: galvanic isolation of input and output parts of the inverter and low parasitic capacitance of galvanic isolation. The required power of the inverter is 100 W and the output voltage is 325 V. The introduction briefly explains why the DC/DC converter with transformer will be used. The first part of the work deals with the selection of a suitable types of DC/DC converter with transformer for powering the oscilloscope. The next part is devoted to designing of the power parts of resonant converter and single acting flyback converter. This is followed by a complete design of a single-acting flyback converter, including the realization and measurement of the time courses of important quantities.

This master thesis is based on realization of the previous university project, design of locomotive reconstruction and solving accompanying problems. In this thesis there are described all parts of a converter. The end of thesis involved theory about driver circuits of power transistors IGBT. Nowadays is still more often to think about reconstruction of the old technology rather than design a complete new construction. Investors take this decision from the financial reasons and because to the old technology designer can add only the converter. In this instant we talk about electrical locomotive, there should be kept a supply transformer and a driving unit (DC engine). The aim of this thesis is to design the converter between these two basic parts. The converter must taking the quasi-sinusoidal current which is in the phase with the input voltage, also must be able to control the engine and recuperate energy back to the network. For realization of these conditions, the converter must contain the active rectifier working in the DC-link and from which the step-down DC/DC converter is fed. Converter output is connected to the driving unit. The digital control of the power transistors is provided by processor MOTOROLA DSP56F. The control impulses, switching the power transistors, go through the driver circuits to transistors. All problems are described in the following text.

This work deals with a proposal and construction of a DC/DC converter for a control of a DC motor Heinzmann. The DC/DC converter will be used in an electric drive for a bicycle. The proposal of the DC/DC converter is designed for such engine power to avoid fully any human force to drive - pedaling. The work includes informations about the used motor, progress of proposal and dimensioning of the converter - power circuit and control electronics.

This work describes the design, construction a performance of such a complete wireless pager suitable for health care centers, rest homes, home application, for example for calling an attendant. This appliance is designed to be easy to attendance. A wireless transceiver is simplified and is attended only by one button. A wireless receiver also doesn't require a complicated manipulation. The aim is to create pager, which will be an useful assistant thanks to its price and simple construction.

Master thesis deals with design controllable switching power source. Device is supplied and controlled via USB bus of PC. The required output parameters are specified by user in a computer application. The teoretical part includes method of USB communication and introduction to switching power sources with focus on a Sepic topologii. The practical part describe individual circuit solution which contains of a complete device. Is analyzed in detail the proposal Sepic converter circuit and controling by microcontroller. The work also includes the design of microcontroller and computer applications. The result of this thesis is a functional device on which is the performed measurement.

A conceptual design and realization of a motor bike using combustion engine and electrical power transfer is the objective of this master´s thesis. Control strategy that allows combustion engine to reach maximal efficiency cooperating with wide range speed and torque operating area electromotor was created. All function blocks were realized. Also hardware of all needed parts was developed. The last part was a design and debugging of control software. Finally the functionality was documented by test drives and measurements.

In present days there is no scientific laboratory without quality, adjustable and powerful source of voltage and current. Therefore this thesis is focused on creating such power source, which can provide voltage and current high enough for most of experiments or for development electrical devices or parts, which are not connected to power grid. This power source is able to provide symmetric voltage 30 V and current 6 A high in each branch. It is possible to control this power source remotely thanks for USB interface, which is standard equipment of majority of modern devices in these days. LCD display is part of this source, which shows the user set and real parameters at the output as well.