Pulp from recycled paper products contains various waxes, glues, adhesives, filler, and inorganics that are collectively referred to as contaminants. Contaminants that are not drained out during the forming process are trapped in the sheet and carried down the paper machine. These contaminant particles and contaminants in solution can become deposited on the dryer cylinders. The contaminants which deposit on the dryer cylinders lead to reduced quality and production of paper on the machine. The process by which contaminants are deposited on a dryer cylinder has not been explored at a fundamental level. Rather, quick industrial fixes have been tested to try and eliminate the contaminant deposition and only reductions in deposition have been achieved. The literature reviewed does not relate the flow of particle suspensions through porous media to the heat transfer and fluid dynamics processes associated with drying paper. The experiments in the literature showed the general trends of particle and dye distributions across the thicknesses of different porous media during forming or filtration processes. Filler and fines distribution were not able to be changed by flows induced by pressing a sheet. The mechanisms for how particles move through porous media found in the literature were a basis for what kind of phenomena would be expected in the particle flow experiments. A means of completely eliminating sticky deposits could be found by examining the parameters which contribute to the deposition process. The hypothesis proposed in this thesis is that contaminant particles and liquid containing contaminants are transported to the dryer can surface by liquid flows induced by the drying process. By performing particle flow experiments during drying, bounds for the particle size, initial drying surface temperature, drying time, and initial solids content will be determined for which the hypothesis is true. The particle and dye transport studies performed showed an array of processes at work simultaneously. The results from the particle and dye transport studies show that a particle diameter of ~1.0 and #956;m or less, handsheet solids content of less than 30%, open sheet structure and a high surface drying temperature (200C) were needed to create a significant change in filler and dye distribution across the thickness of a handsheet.

This thesis analyzes the direction of time problem in the framework of philosophy of science. The radiation arrow, Newtonian arrow, thermodynamic arrow and quantum mechanical arrow have been studied in detail. The importance of the structure of space-time concerning direction of time is emphasized.

In recent years, the demand for portable radio communication has been increasing which requires low profile, light weight and small size antennas. Therefore, the size of the antenna is required to be as small as possible. In this thesis, some of the compact antennas will be analyzed and simulated. The early-stage PIFA antenna will be investigated first, and then the shorting pin characteristics to design compact and dual band antenna was utilized. Because the shorting pin will lead to the decrease of bandwidth, replacement of the shorting pin by using chip-resistor could improve this characteristic. The compactness of antennas will lead to the decrease of the gain. In order to improve the gain of antennas, the combination of substrate and superstrate configuration with very high permittivity material is used. For the consideration of Bluetooth system, we use the ACPS (Asymmetrical Co-planar Striplines) structure to design the antenna. Using this structure in the design will obtain a promotion in bandwidth compared with the conventional rectangular microstrip antenna. Because the size of the antenna is small, the time to simulate this structure by the FDTD (Finite Difference Time Domain) method is too long. In order to solve this problem, this thesis mainly study a new FDTD algorithm based on the Alternating-Direction Implicit method, and use this algorithm to simulate some simple structures.

Diss.--Philosophie--Freiburg--Albert-Ludwigs-Univ., 2002. / Sources et bibliogr. p. 493-518.

Thesis (D. Min.)--Gordon-Conwell Theological Seminary, South Hamilton, MA, 2003. / Abstract and vita. Includes bibliographical references (leaves 141-144).

Not available / text

An in depth reflection on my approach to directing theater, particularly the attitudes and exercises I utilize to foster a positive environment for actors and designers to do their best artistic work. This thesis sites specific examples from the productions I directed as a Master of Fine Arts student in the Department of Theatre and Dance at the University of Texas at Austin. / text

Not available / text

published_or_final_version / abstract / toc / Music / Master / Master of Philosophy

No description available.