No description available.

This study aimed to improve the known microwave method to produce carbon dot nanoparticles from ethylenediamine and citric acid. Carbon dots have recently gained much attention as they have diverse applications, such as bioimaging and drug delivery reagents as cancer theranostics. Research was focused on establishing the ideal time for the synthetic reaction to produce carbon dot nanoparticles with the microwave method. After several trials, the 16-minute trial provided the best results based on Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, fluorescence spectroscopy, and ultraviolet exposure.

Electron transport in single lateral quantum dot (QD) and parallel lateral double quantum dot (DQD) systems is modeled using semiclassical rate equations. The Zeeman effect, in conjunction with resonant tunneling, is used to select the spin of electrons involved in transport. We show adiabatic spin pumping by periodic variation of the systems' confining parameters, namely the quantum point contacts (QPCs) dictating the boundaries of the dots, and the gate voltage applied to each dot. The limitations of adiabatic spin pumping are subsequently examined by counting the average spin pumped per cycle when frequency and interdot capacitance are adjusted.

The first part of this dissertation presents a comprehensive study of quantum dot (QD) lasers threshold characteristics. The threshold temperature dependence of a QD laser diode is studied in different limits of p-doping, hole level spacing and inhomogeneous broadening. Theoretical analysis shows that the threshold current of a QD laser in the limit of uniform QDs is not temperature independent and actually more temperature sensitive than the quantum well laser. The results also explain the experimental trends of negative characteristic temperature observed in QD lasers and clarify how the carrier distribution mechanisms inside and among the QDs affect the threshold temperature dependence of a QD laser diode. The second part is on the experimental demonstration of lithographic lasers. Today’s vertical-cavity surface-emitting lasers (VCSELs) based on oxide-aperture suffer from serious problems such as heat dissipation, internal strain, reliability, uniformity and size scaling. The lithographic laser provides solutions to all these problems. The transverse mode and cavity are defined using only lithography and epitaxial crystal growth providing simultaneous mode- and current-confinement. Eliminating the oxide aperture is shown to reduce the thermal resistance of the device and leading to increased power density in smaller lasers. When it is combined with better mode matching to gain for smaller devices, high output power density of 58 kW/cm2 is possible for a 3 μm VCSEL with threshold current of 260 μA. These VCSELs also have gratingfree single-mode single-polarization emission. The demonstration of lithographic laser diodes with good scaling properties is therefore an important step toward producing ultra-small size laser diodes with high output power density, high speed, high manufacturability and high iv reliability. Lithographic VCSELs ability to control size lithographically in a strain-free, high efficiency device is a major milestone in VCSEL technology.

No description available.

<p> Quantum dots are semiconductor nanocrystals with unique optical properties that give them the potential to be excellent probes for bio-imaging applications. However, before quantum dots can be employed for such applications, their toxicity and cellular interactions need to be thoroughly assessed. The Caenorhabditis elegans (C. elegans) embryo was chosen as a test environment to study both the toxicity and dynamics of carboxyl terminated CdSe/ZnS quantum dots. Using confocal imaging, it was found that the C. elegans embryo is not morphologically affected by the introduction of quantum dots up to a concentration of about 1 OOnM. However, the embryo was observed to respond to the nanomaterial by packaging it into aggregates during development in a dose and time dependant manner. Image analysis and fluorescence correlation spectroscopy revealed that this packaging process happens from the nm scale to the J.Ull scale and that it reduces quantum dot mobility over development. This work shows that the dynamics of the quantum dots are highly influenced by the cellular environment in the embryo, as they appear to aggregate and possibly also interact with cellular structures and organelles in the embryo. </p> / Thesis / Master of Applied Science (MASc)

Exploratory data analysis aims to study datasets through the use of iterative, investigative, and visual analytic algorithms. Due to the difficulty in managing and accessing the growing volume of unstructured data, exploratory analysis of datasets has become harder than ever and an interest to data mining researchers. In this dissertation, we study new algorithms for exploratory analysis of data collections using clusters and stories. Clustering brings together similar entities whereas stories connect dissimilar objects. The former helps organize datasets into regions of interest, and the latter explores latent information by connecting the dots between disjoint instances. This dissertation specifically focuses on five different research aspects to demonstrate the applicability and usefulness of clusters and stories as exploratory data analysis tools. In the area of clustering, we investigate whether clustering algorithms can be automatically "alternatized" and how they can be guided to obtain alternative results using flexible constraints as "scatter-gather" operations. We demonstrate the application of these ideas in many application domains, including studying the bat biosonar system and designing sustainable products. In the area of storytelling, we develop algorithms that can generate stories using distance, clique, and syntactic constraints. We explore the use of storytelling for studying document collections in the biomedical literature and intelligence analysis domain. / Ph. D.

The overall research theme of this dissertation was the study of nanoparticle/polymer composites. Two types of nanoparticles were utilized: Single-Walled Carbon Nanotubes and quantum dots. Chapter 1 of this thesis comprises an extensive literature review on Carbon Nanotubes, which presents theoretical aspects relevant to the structure and properties of CNTs, methods of purifying and solubilizing CNTs in aqueous and organic solvents and selected applications. This literature review is followed by the study and comparison of the optical limiting performances of different Single-Walled Carbon Nanotubes/conjugated polymer dispersions (Chapter 2). The results obtained are discussed in terms of dispersion of the SWNTs in the polymer solutions and resulting SWNT bundle diameters. Chapter 3 presents the spontaneous assembly of dendrimer patterns induced by SWNTs. Finally, chapter 4 presents a new method for fabricating quantum dot/polymer composites, which uses the extraction of positively charged quantum dot into a hydrophobic liquid. The resulting solution is used as a compatible polymerization medium for poly(methylmethacrylate ) networks enabling the formation of transparent and fluorescent composites. / Ph. D.

A great deal of interest has been dawn on the colloidal chemistry based semiconductor nanocrysallites, also known as quantum dots (QDs). Because of the strong quantum confinement, quantum dots have unique size-dependent optical properties, which are much more superior to the conventional organic fluorescence materials. In addition, strong chemical resistant makes inorganic semiconductor QDs ideal candidate for next-generation of bio-labels and drug delivery vehicles. This report presents a user friendly approach to synthesize high quality biocompatible CdSe QDs in aqueous solution. Size of the dots can be controlled by adjusting the temperature, pH of the solution, and ratio of the precursors. A thin CdS layer was grown on CdSe QDs, forming a CdSe/CdS core/shell structure, to improve the photoluminescence. In order to use these QDs in-vivo, a more chemically robust coating, silica, was grown on the core/shell structure QD. The optical properties of the QDs were characterized by absorption and photoluminescence spectra. X-ray diffraction and transmission electron microscopy were conducted to verify the QDs composition and structure. / Ph. D.

Quantum information technologies offer significantly more computational power for certain tasks and secure communication lines compared to the available classical machines. In recent years there have been numerous proposals for the implementation of quantum computers in several different systems that each come with their own advantages and challenges. This dissertation primarily focuses on challenges, specifically interactions with the environment, and applications of two of such systems: Semiconductor quantum dots and topological insulators. The first part of the dissertation is devoted to the study of semiconductor quantum dots as candidates for quantum information storage and sources of single-photon emission. The spin of the electron trapped in a self-assembled quantum dot can be used as a quantum bit of information for quantum technology applications. This system possesses desirable photon emission properties, including efficiency and tunability, which make it one of the most advanced single-photon emitters. This interface is also actively explored for the generation of complex entangled photonic states with applications in quantum computing, networks, and sensing. First, an overview of the relevant developments in the field will be discussed and our recent contributions, including protocols for the control of the spin and a scheme for the generation of entangled photon states from coupled quantum dots, will be presented. We then look at the interaction between the electron and the surrounding nuclear spins and describe how its interplay with optical driving can lead to dynamic nuclear polarization. The second part of the dissertation follows a similar study in topological insulators: The role of time-reversal breaking magnetic impurities in topological materials and how spinful impurities enable backscattering mechanisms by lifting the topological protection of edge modes. I will present a model that allows for an analytical study of the effects of magnetic impurities within an experimental framework. It will be discussed how the same platform also enables a novel approach for applications of spintronics and quantum information, such as studying the entanglement entropy between the impurities and chiral modes of the system. / Doctor of Philosophy / Quantum information science has received special attention in recent years due to its promising advantages compared to classical machines. Building a functional quantum processor is an ongoing effort that has enjoyed enormous advancements over the past few years. Several different condensed matter platforms have been considered as potential candidates for this purpose. This dissertation addresses some of the major challenges in two of the candidate platforms: Quantum dots and topological insulators. We look at methods for achieving high-performance optical control of quantum dots. We further utilize quantum dots special ability to emit photons for specific quantum technology applications. We also address the nuclear spin problem in these systems which is the main source of destruction of quantum information and one of the main obstacles in building a quantum computer. This is followed by the study of a similar problem in topological insulators: Addressing the interaction with magnetic impurities of topological insulators. Included with each of these topics is a description of relevant experimental setups. As such, the studies presented in this dissertation pave the way for a better understanding of the two major obstacles of hyperfine interactions and the optical controllability of these platforms.