In this thesis, We have calculated the optimized geometries, electronic structures and spin distributions of metal and non-metal elements Li, Na, N and P doped C60 fullerene dimers and trimers with different spin multiplicities using hybrid density functional theory (DFT) at the B3LYP/6-31G level of theory. Natural population analysis and Mulliken population analysis show that non-metal elements (N, P) inside the C60 fullerene dimers and trimers are well isolated and preserve their electronic structures while charge transfer processes occur between metal elements(Li, Na) and C60 structures. Energy calculations showed that both doped and undoped linear C60 structures are energetically lower than triangular C60 structures. Calculated spin density distributions make non-metal doped C60 structures advantageous over metal doped C60 cages as spin cluster qubits.

Energy need in transportation and industry is mainly met by fossil fuels. This causes consumption of resources and some environmental problems. Diesel and gasoline engines are developed to consume fuel efficiently in vehicles. Since these engines work in a low fuel to air ratio, it becomes difficult to reduce nitrogen oxide emission. For this reason NO x storage/reduction (NSR) catalysts have been developed. While engines are operating under lean conditions alkaline or alkaline-earth component of NSR catalysts capture nitrogen oxides and during fuel rich period stored nitrates are reduced to nitrogen and oxygen gases. To develop this technology, different system parameters, for example system components and reaction environments have been widely investigated experimentally. To supplement the experimental findings, binding energies and structural properties of NO x on different catalyst components have been investigated theoretically. It has been experimentally observed that adding TiO2 to other conventional support materials increases resistance against sulfur poisoning, which is one of the main problems concerning NSR catalysts. For this reason, in this thesis (001) and (101) anatase surfaces have been investigated. Moreover, the effects of barium oxide units and layers on the electronic properties of the (001) anatase surface have been studied. To observe the effects of TiO2 as a support component, interactions of NO2 and SO2 on the unsupported and anatase supported (100) BaO surfaces have been compared. A clear increase in sulfur resistance has been observed in the presence of TiO2 in the catalyst under certain conditions.

We use the first-principles molecular-dynamics¡@simulation method (MD), which is based on the density functional theory (DFT) with local-density approximation (LDA), to calculate the sticking property of a carbon atom on hydrogen covered C(100) surface. We focused on trajectories and kinetic energy transfer of the gas-phase C atom for four incident angles of =0, £k/8, £k/6 and £k/4. We find that the calculated trajectories and the kinetic energy transfer of the gas-phase atom, Cn, overall are not very sensitive to the change of the incident angle. The insensitivity of the sticking property on the incident angle may be due to a large chemisorption energy, which bends the trajectory of Cn toward the surface, so that Cn is confined to move within a small range.

In this thesis, mechanical and electronic properties of a (4,4) SiC nanotube under different tensile strain were investigated by density functional theory (DFT) calculation. The HOMO-LUMO gap of nanotube will significantly decrease linearly with the increase of axial strain. Two different slopes are found before and after an 11% strain in the profile of HOMO-LUMO gap versus strain. The partial density of states, bond order and electronic deformation density were discussed for demonstrating the strain effect on the electronic properties of SiC nanotube under axial strain. The adsorption mechanism of CO on SiC nanotubes with different axial strains as well as the charge distributions after the adsorption were also discussed.

Mixed-valence compounds are of interest as model systems for the study of electron transfer reactions. The intramolecular electron transfer processes and patterns of charge delocalization in such compounds depend on the interplay between the electronic (V) and the vibronic (L) coupling. One can obtain both parameters from a Hush analysis of the intervalence band that arises upon optical intramolecular electron transfer if the band is intense and well-separated from other bands. This is quite often the case for mixed-valence triarylamines. As such, both Hush analysis and simulation of the intervalence band are widely used to classify these compounds as charge localized (class-II) or delocalized (class-III). Yet one must estimate the diabatic electron transfer distance (R) to calculate V in the Hush formalism. For mixed-valence triarylamines, R is commonly taken as the N-N distance; we show this to be a poor approximation in many cases. The activation barrier to thermal intramolecular electron transfer in a class-II mixed-valence compound is also related to the parameters V and L. Thus, if one can capture the rate of thermal electron transfer at multiple temperatures, then two experimental methods exist by which to extract the microscopic parameters. One technique that is widely used for organic mixed-valence compounds is variable-temperature electron spin resonance (ESR) spectroscopy. But this method is only rarely used to determine thermal electron transfer rates in mixed-valence triarylamines, as the electron transfer in most of the class-II compounds with distinct intervalence bands is too fast to observe on the ESR timescale. We show, for the first time, that one can use ESR spectroscopy to measure thermal electron transfer rates in such compounds. Simulation of ESR spectra based on density functional theory calculation and comparison with optical data also uncover the nature (i.e., adiabatic or nonadiabatic) of the electron transfer process.

The distinct response of biological systems to the two enantiomers of a chiral chemical has led to a large market for enantiopure pharmaceuticals and raised fundamental issues about the origin of biological homochirality. It is therefore important to understand the interactions of chiral molecules with chiral environments. Chiral environments associated with solid surfaces could potentially play a useful role in chirally specific chemical processing. There are a variety of routes for creating chiral solid surfaces. Surfaces of materials whose bulk crystal structure is enantiomorphic can be used as one type of chiral solid surfaces. Metal surfaces that are intrinsically chiral due to the presence of kinked surface steps provide another route for creating chiral solid surfaces. Alternatively, we can impart chirality onto surfaces by attaching irreversibly adsorbing chiral organic species on otherwise achiral surfaces. Understanding and ultimately controlling enantiospecific interactions of molecules on this kind of surfaces requires detailed insight into the adsorption geometries and energies of these complex interfaces. To tackle these issues, we performed density functional theory (DFT) calculations that have proved to be a useful tool for quantitative prediction of these effects. Besides our main topic above, we theoretically examine the effects of K atoms as a promoter coadsorbed with small molecules on Mo2C surfaces, a promising catalyst for a range of chemicals applications. Our results in this thesis provide fundamental information about these systems and demonstrate that using DFT for this purpose can be a useful means of identifying the phenomena that control chiral surface chemistry.

The interface of a zinc-terminated polar zinc oxide surface (0002) with a series of chemisorbed fluorinated benzylphosphonic acids has been studied using density functional theory. The calculations indicate that there is a substantial change in the binding energies and work function modification depending on the binding motif. The results also indicate that there is a pronounced difference in the magnitude and trends of the factors determining the total change in work function. The oxygen core-level binding shifts have been calculated and compared to available experimental data.

No description available.

<p>Molecular electronics is envisioned as a possible next step in device miniaturization. It is usually taken to mean the design and manufacturing of electronic devices and applications where organic molecules work as the fundamental functioning unit. It involves the easurement and manipulation of electronic response and transport in molecules attached to conducting leads. Organic molecules have the advantages over conventional solid state electronics of inherent small sizes, endless chemical diversity and ambient temperature low cost manufacturing.</p><p> In this thesis we investigate the switching and conducting properties of photochromic dithienylethene derivatives. Such molecules change their conformation in solution when acted upon by light. Photochromic molecules are attractive candidates for use in molecular electronics because of the switching between different states with different conducting properties. The possibility of optically controlling the conductance of the molecule attached to leads may lead to new device implementations.</p><p> The switching reaction is investigated with potential energy calculations for different values of the reaction coordinate between the closed and the open isomer. The electronic and atomic structure calculations are performed with density functional theory (DFT). It is concluded that there is a large potential energy barrier separating the open and closed isomer and that switching between open and closed forms must involve excited states. </p><p>The conducting properties of the molecule inserted between gold leads is calculated within the Non Equilibrium Green Function theory. The transmission function is calculated for the two isomers with different basis sizes for the gold contacts, as well as the electrostatic potential, for finite applied bias voltages. We conclude that a Au 6s basis give qualitatively the same result as a Au spd basis close to the Fermi level. The transmission coefficient at the Fermi energy is around 10 times larger in the closed molecule compared to the open. This will result in a large difference in conductivity. It is also found that the large difference in conductivity will remain for small applied bias voltages. The results are consistent with earlier work.</p>

<p>The purpose of this thesis has been to investigate the elastic properties of an fcc FeMg alloy with 10 at.% magnesium under high pressure. Recent research has shown that magnesium can be a possible candidate for light element impurities in the Earth’s inner core, something that was previously not considered possible because of the low miscibility of magnesium in iron at ambient pressure. Gaining knowledge about the composition of the Earth’s core can help us better understand such phenomena as seismic activity and the fluctuations of the Earth’s magnetic field.</p><p>The elastic constants of the FeMg alloy was calculated using ab-initio methods based on Density Functional Theory. The Exact Muffin-Tin Orbitals method was used in conjunction with the Coherent Potential Approximation.</p><p>The FeMg alloy was found to be overall considerably softer than pure iron, and the softening effect on the elastic constants was also found to increase with pressure. The results also showed that 10% Mg alloying increased the anisotropy with about 40% compared to pure iron.</p>