Nanosecond pulse electroporation of biological cells is gaining significant interest due to its ability to influence intracellular structures. In nanosecond pulse electroporation of biological cells nanosecond duration pulses with high frequency spectral content are applied to the cell. In this research we show that accurate modeling of the nanosecond pulse electroporation process requires considering the effect of the membrane dielectric relaxation on the electric potential across the membrane. We describe the dielectric relaxation of the membrane as dispersion in the time-domain and incorporate it into the nonlinear asymptotic model of electroporation. Our nonlinear dispersive model of a biological cell is solved using finite element method in 3-D space enabling arbitrary cell structures and internal organelles to be modeled. The simulation results demonstrate two essential differences between dispersive and non-dispersive membrane models: the process of electroporation occurs faster when the membrane dispersion is considered, and the minimum required electric field to electroporate the cell is significantly reduced for the dispersive model.

Nanosecond pulse electroporation of biological cells is gaining significant interest due to its ability to influence intracellular structures. In nanosecond pulse electroporation of biological cells nanosecond duration pulses with high frequency spectral content are applied to the cell. In this research we show that accurate modeling of the nanosecond pulse electroporation process requires considering the effect of the membrane dielectric relaxation on the electric potential across the membrane. We describe the dielectric relaxation of the membrane as dispersion in the time-domain and incorporate it into the nonlinear asymptotic model of electroporation. Our nonlinear dispersive model of a biological cell is solved using finite element method in 3-D space enabling arbitrary cell structures and internal organelles to be modeled. The simulation results demonstrate two essential differences between dispersive and non-dispersive membrane models: the process of electroporation occurs faster when the membrane dispersion is considered, and the minimum required electric field to electroporate the cell is significantly reduced for the dispersive model.

No description available.

Success in geotechnical analysis, design, and construction invariably requires that we have proper knowledge and understanding of (1) the strength, (2) the fluid flow properties, and (3) the stress-deformation behavior of the earth materials. These important engineering properties are primarily determined by the components and structure of a soil, which also dictate the soil's responses in an electromagnetic field. As a nondestructive technique, the electromagnetic property measurement offers a promising approach to characterize earth materials and identify the effects of changes in environments. However, despite many investigations in the last several decades, the relationship between the frequency-dependent electromagnetic properties of soils and their components and structure are still not well understood. Hence, estimation of engineering properties of a soil in a quantitative way from electromagnetic measurements can be uncertain. In this research several tasks have been accomplished: (1) Development of a physically based model that provides a means of investigating the coupled effects of important polarization mechanisms on soil electromagnetic properties, and a means of relating the electromagnetic properties of a soil to its fines content, clay mineralogy, anisotropy, degree of flocculation and pore fluid chemistry; (2) Proposal of a practically applicable method to determine the volumetric water content, specific surface area and pore fluid salt concentration simultaneously from the dielectric spectrum; (3) Deduction of the wide-frequency electromagnetic properties of a soil by measuring its responses to a step pulse voltage using time domain reflectometry (TDR); (4) Establishment of the relationships between the specific surface area and compressibility, residual shear strength and hydraulic conductivity. This study establishes a framework for quantifying soil engineering properties from their electromagnetic properties. If properly determined and interpreted, the electromagnetic properties can also provide insights into the causes of soil property changes over time and can be very useful in studying the effects of biological factors in geotechnical engineering, a field that may offer great potential for future advances. / Ph. D.

Abstract This PhD thesis is composed of a synopsis and five published papers that are focused on both the research results of studies on electrical properties of road materials and subgrade soils and their seasonal changes and the use of Ground Penetrating Radar technique in traffic infrastructure surveys. The data for this survey was collected mainly in Finland, Texas, Scotland and Sweden and thus presents many kinds of road materials, subgrade soils and climate conditions. The synopsis of this work begins with a presentation of the theory and basic principles of GPR techniques. Special attention is given to the dielectric properties and seasonal changes of unbound road materials and subgrade soils. The synopsis also presents different kinds of GPR hardware systems as well as recommendations and experiences from different data collection, processing and interpretation techniques. Special attention is given to a method whereby GPR data is integrated with other road survey data and then analysed using a number of structural diagnostic methods. Finally, the synopsis provides an overview of of the various GPR applications on roads and streets, bridges, railways and airports. The laboratory test results presented in this work show that the relationship between dielectric value and increasing water content is not linear or exponential but more likely a series of logarithmic functions. Laboratory results also showed that dielectric dispersion, which can be related to poorly performing subgrade soils and road aggregates, takes place mainly in loosely bound adsorption water and capillary water layer. As such these moisture sensitive problem materials can also be identified during the dry summer seasons when they are stiff. Dielectric value and electrical conductivity can also be related to other technical properties of road materials and subgrade soils such as frost susceptibility, shear strength, plastic limit, compaction degree and voids content. Laboratory tests and field data collected using the Percostation technique also demonstrate that a knowledge of seasonal changes and thermodynamics is very important in understanding and modelling the mechanical behaviour of road structures. Finally, laboratory and field tests indicate that colloids have an important role in the failure mechanism of the road materials. This research demonstrates that the GPR technique not only gives valuable structural information on the different types of structures and subgrade soils but it provides a wide range of information of the electrical properties of the materials under survey which can be further related to their mechanical performance. The best information will be gained if GPR data is analysed together with other non destructive testing data collected form the roads, railways and airports.

Blue phase liquid crystals (BPLCs) have a delicate lattice structure existing between chiral nematic and isotropic phases, with a stable temperature range of about 2 K. But due to short coherent length, these self-assembled nano-structured BPLCs have a fast response time. In the past three decades, the application of BPLC has been rather limited because of its narrow temperature range. In 2002, Kikuchi et al. developed a polymer stabilization method to extend the blue-phase temperature range to more than 60 K. This opens a new gateway for display and photonic applications. In this dissertation, I investigate the material properties of polymer-stabilized BPLCs. According the Gerber’s model, the Kerr constant of a BPLC is linearly proportional to the dielectric anisotropy of the LC host. Therefore, in the frequency domain, the relaxation of the Kerr constant follows the same trend as the dielectric relaxation of the host LC. I have carried out experiments to validate the theoretical predictions, and proposed a model called extended Cole-Cole model to describe the relaxation of the Kerr constant. On the other hand, because of the linear relationship, the Kerr constant should have the same sign as the dielectric anisotropy of the LC host; that is, a positive or negative Kerr constant results from positive (∆ε > 0) or negative host LCs (∆ε < 0), respectively. BPLCs with a positive Kerr constant have been studied extensively, but there has been no study on negative ∆ε polymer-stabilized BPLCs. Therefore, I have prepared a BPLC mixture using a negative ∆ε LC host and investigated its electro-optic properties. I have demonstrated that indeed the induced birefringence and Kerr constant are of negative sign. Due to the fast response time of BPLCs, color sequential display is made possible without color breakup. By removing the spatial color filters, the optical efficiency and resolution density are both tripled. With other advantages such as alignment free and wide viewing angle, polymer-stabilized BPLC is emerging as a promising candidate for next-generation displays. However, the optical efficiency of the BPLC cell is relatively low and the operating voltage is quite high using conventional in-plane-switching electrodes. I have proposed several device structures for improving the optical efficiency of transmissive BPLC cells. Significant improvement in transmittance is achieved by using enhanced protrusion electrodes, and a 100% transmittance is achievable using complementary enhanced protrusion electrode structure. For a conventional transmissive blue phase LCD, although it has superb performances indoor, when exposed to strong sunlight the displayed images could be washed out, leading to a degraded contrast ratio and readability. To overcome the sunlight readability problem, a common approach is to adaptively boost the backlight intensity, but the tradeoff is in the increased power consumption. Here, I have proposed a transflective blue phase LCD where the backlight is turned on in dark surroundings while ambient light is used to illuminate the displayed images in bright surroundings. Therefore, a good contrast ratio is preserved even for a strong ambient. I have proposed two transflective blue phase LCD structures, both of which have single cell gap, single gamma driving, reasonably wide view angle, low power consumption, and high optical efficiency. Among all the 3D technologies, integral imaging is an attractive approach due to its high efficiency and real image depth. However, the optimum observation distance should be adjusted as the displayed image depth changes. This requires a fast focal length change of an adaptive lens array. BPLC adaptive lenses are a good candidate because of their intrinsic fast response time. I have proposed several BPLC lens structures which are polarization independent and exhibit a parabolic phase profile in addition to fast response time. To meet the low power consumption requirement set by Energy Star, high optical efficiency is among the top lists of next-generation LCDs. In this dissertation, I have demonstrated some new device structures for improving the optical efficiency of a polymerstabilized BPLC transmissive display and proposed sunlight readable transflective blue-phase LCDs by utilizing ambient light to reduce the power consumption. Moreover, we have proposed several blue-phase LC adaptive lenses for high efficiency 3D displays.